Sector 9i Carbon Front Mountain Bike RimReady for shredding the trails with your friends as well as exploring new off-road routes on your own, this carbon MTB rim is engineered for maximum performance. It features a hard-wearing unidirectional carbon fibre rim construction, which allows you to benefit from its fantastic strength without adding any unnecessary weight to your ride. Sector has taken this model's design a step further by also integrating TeXtreme Innegra into the layup of the rims. This gives it 75% more impact resistance than standard carbon rims of the same profile. The 9i MTB rim is significantly more resistant to wear and tear and less prone to catastrophic failure.So what is Innegra?Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping and energy dissipation. The TexTreme fabric used in the layup of 9i rim is a Spread Tow fabric built from a hybrid of Innegra and T700 carbon fibres.The Spread Tow layout is significant because it also contributes some positive attributes - the fibres are straighter (reduced crimp therefore higher strength) and it facilitates the use of less resin (lower weight). In the 9i rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern.Sounds good, but what does that mean for a rim? Significantly more compliance... Under a lab test the 9i rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the 9i rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim. It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue and to improve traction. Such an improvement in vertical compliance also brings a radically improved ride quality to the 9i wheelset.The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance... In the lab the 9i rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The 9i rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements.In real world terms, the 9i rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight... Despite offering strength and compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim. The Innegra equipped 9i rim weighs just 428g (29”).Features: Rim Material: T-700 Unidirectional Carbon Fibre; Outer layer: TeXtreme Plain Weave Spread Tow Carbon Fibre and Innegra S Hybrid Use: MTB Rim Size: 29" Holes: 28h or 32h options Rim Width: (Internal) 29mm; (External) 35mm Rim Depth: 25mm ERD: 591mm Tubeless: Yes Single or Pair: Single Weight: 428gBuy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Sector CT30 Carbon Cyclocross WheelsetDesigned in partnership with wheel industry expert, Paul Lew, this CX wheelset features a unidirectional carbon fibre rim construction that gives it phenomenal strength without sacrificing any weight. Sector has also equipped this wheelset with a 30mm deep tubular rim profile that provides the ultimate blend for weight, mud-shedding ability, stiffness and aerodynamics. Sector has custom designed the carbon CT30 laminate and impact performance within their existing tooling to meet the specific requirements for use as a Cyclo-Cross disc brake rim. This will ensure your wheels will withstand multiple seasons of brutal Cyclo-Cross races.Cyclo-Cross puts a demanding amount of torque on the rear hub, often in very muddy and wet conditions. Into the CT30 we have laced a rear hub with a four-pawl ratchet and oversized pawls to ensure engagement never fails. Both front and rear hubs are fitted with high quality double sealed bearings to keep the worst of the mud out. The lightweight 7075-T6 Aluminium alloy hub shells feature angled flanges to ensure that they follow the path of the spoke, reducing the stress on the spoke and increasing its lifespan.Features: Rim Material: T-700 Unidirectional Carbon Fibre Wheel Size: 700c Use: Cyclocross Spokes / Type: Pillar 1416 DB / J-Bend Nipples: Pillar Pro Alloy Hub Rotor Fitment: Centrelock Freehub: 4 Pawl, Shimano HG) Hole Count: 24h Rim Width: (Internal) 24mm | (External) N/A Rim Depth: 30mm Tubeless: No Single or Pair: Pair End Caps: (Front) 100x12mm / (Rear) 142x12mm Extras: QR End Caps Weight: 1400gBuy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Sector GCi Carbon Gravel WheelsetWhether you're racing across the mud or simply exploring the countryside gravel roads, this wheelset is engineered for fast and smooth-rolling performance. It features a hard-wearing unidirectional carbon fibre rim construction, which allows you to benefit from its amazing strength without adding any unnecessary grams to your gravel bike. Engineered to excel in high impact environments, this model is equipped with revolutionary TeXtreme Innegra that's integrated into the layup of the rims. This special fibre delivers 75% high impact resistance when compared to standard carbon rims of the same profile. This means you can enjoy high energy rides with superior vibration damping and none of the harsh stiffness associated with carbon.So what is Innegra?Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping and energy dissipation. The TexTreme fabric used in the layup of GCi rim is a Spread Tow fabric built from a hybrid of Innegra and T700 carbon fibres. The Spread Tow layout is significant because it also contributes some positive attributes - the fibres are straighter (reduced crimp therefore higher strength) and it facilitates the use of less resin (lower weight).In the GCi rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern.Sounds good, but what does that mean for a rim? Significantly more compliance...Under a lab test the GCi rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the GCi rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim.It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue and to improve traction. Such an improvement in vertical compliance also brings a radically improved ride quality to the GCi wheelset.The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance...In the lab the GCi rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The GCi rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements. In real world terms, the GCi rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight...Despite offering strength and compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim. The Innegra equipped GCi rim weighs just 440g, and Sector's complete wheelset weighs just 1690g.Features: Rim Material: T-700 Unidirectional Carbon Fibre; Outer layer: TeXtreme Plain Weave Spread Tow Carbon Fibre and Innegra S Hybrid Wheel Size: 700c Use: Gravel Spokes / Type: Pillar 1422 Bladed / Straight Pull Nipples: Pillar Black Brass DSN Hub Rotor Fitment: Centrelock Freehub: 6 Pawl (Shimano or SRAM XD options available to select) Hole Count: 24h ERD: 566mm Rim Width: (Internal) 24mm | (External) 31mm Rim Depth: 38mm Tubeless: Yes Single or Pair: Pair End Caps: (Front) 100x12mm / (Rear) 142x12mm Extras: Tubeless Sealant, valves, tape and 15mm end caps Weight: 1690gBuy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Sector GCi Carbon Gravel WheelsetWhether you're racing across the mud or simply exploring the countryside gravel roads, this wheelset is engineered for fast and smooth-rolling performance. It features a hard-wearing unidirectional carbon fibre rim construction, which allows you to benefit from its amazing strength without adding any unnecessary grams to your gravel bike. Engineered to excel in high impact environments, this model is equipped with revolutionary TeXtreme Innegra that's integrated into the layup of the rims. This special fibre delivers 75% high impact resistance when compared to standard carbon rims of the same profile. This means you can enjoy high energy rides with superior vibration damping and none of the harsh stiffness associated with carbon.So what is Innegra?Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping and energy dissipation. The TexTreme fabric used in the layup of GCi rim is a Spread Tow fabric built from a hybrid of Innegra and T700 carbon fibres. The Spread Tow layout is significant because it also contributes some positive attributes - the fibres are straighter (reduced crimp therefore higher strength) and it facilitates the use of less resin (lower weight).In the GCi rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern.Sounds good, but what does that mean for a rim? Significantly more compliance...Under a lab test the GCi rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the GCi rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim.It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue and to improve traction. Such an improvement in vertical compliance also brings a radically improved ride quality to the GCi wheelset.The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance...In the lab the GCi rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The GCi rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements. In real world terms, the GCi rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight...Despite offering strength and compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim. The Innegra equipped GCi rim weighs just 440g, and Sector's complete wheelset weighs just 1690g.Features: Rim Material: T-700 Unidirectional Carbon Fibre; Outer layer: TeXtreme Plain Weave Spread Tow Carbon Fibre and Innegra S Hybrid Wheel Size: 700c Use: Gravel Spokes / Type: Pillar 1422 Bladed / Straight Pull Nipples: Pillar Black Brass DSN Hub Rotor Fitment: Centrelock Freehub: 6 Pawl (Shimano or SRAM XD options available to select) Hole Count: 24h ERD: 566mm Rim Width: (Internal) 24mm | (External) 31mm Rim Depth: 38mm Tubeless: Yes Single or Pair: Pair End Caps: (Front) 100x12mm / (Rear) 142x12mm Extras: Tubeless Sealant, valves, tape and 15mm end caps Weight: 1690gBuy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Weight: S 173 g - L 180 g Chassis: Carbon Rail (+ 10mm) Dimensions: S 135x250 mm / L 145x250 mm Category: performance Cuts: L1 & S1
Selle Italia Flite Boost Kit Carbon Superflow SaddleWith Superflow technology, carbon rails and a flat boost shape, this saddle celebrates 30 years of history by continuing its tradition of greatness. It features a Fibra-Tek cover construction for exceptional strength, durability and comfort on every ride. Selle Italia has also equipped it with CarboKeramic (carbon) rails, so you can benefit from their superior strength to weight ratio, whatever your discipline. Finally, its Superflow technology uses its large central cut-out area to relieve pressure around your sit bones. As a result, you'll enjoy going the extra distance with reduced fatigue and increased comfort.Updated Flite LogoA revised logo, to relive the history and victories of a legendary product. A saddle that has supported and still supports champions such as Mathieu Van Der Poel, Caleb Ewan, Philippe Gilbert and many others.Flat and Boost ShapeThe Flite Boost resumes the classic “Flat” shape that has always distinguished the Flite family to guarantee, together with a more compact shape (250mm of length), the usual performance and maximum stability while pedalling.SuperflowThe “Superflow” central cut-out allows you to release the pressure from the central area and benefit from greater comfort when pedalling.Features: Cover Material: Fibra-Tek Rail Material: Carbon/Keramic Use: Road, Racing, Endurance and MTB Dimensions:S:135x250mm; L: 145x250mm Rail Size: 7x9mm Category: Performance Weight: L: 162g (large version)Buy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Selle Italia Flite Boost Kit Carbon Superflow SaddleWith Superflow technology, carbon rails and a flat boost shape, this saddle celebrates 30 years of history by continuing its tradition of greatness. It features a Fibra-Tek cover construction for exceptional strength, durability and comfort on every ride. Selle Italia has also equipped it with CarboKeramic (carbon) rails, so you can benefit from their superior strength to weight ratio, whatever your discipline. Finally, its Superflow technology uses its large central cut-out area to relieve pressure around your sit bones. As a result, you'll enjoy going the extra distance with reduced fatigue and increased comfort.Updated Flite LogoA revised logo, to relive the history and victories of a legendary product. A saddle that has supported and still supports champions such as Mathieu Van Der Poel, Caleb Ewan, Philippe Gilbert and many others.Flat and Boost ShapeThe Flite Boost resumes the classic “Flat” shape that has always distinguished the Flite family to guarantee, together with a more compact shape (250mm of length), the usual performance and maximum stability while pedalling.SuperflowThe “Superflow” central cut-out allows you to release the pressure from the central area and benefit from greater comfort when pedalling.Features: Cover Material: Fibra-Tek Rail Material: Carbon/Keramic Use: Road, Racing, Endurance and MTB Dimensions:S:135x250mm; L: 145x250mm Rail Size: 7x9mm Category: Performance Weight: L: 162g (large version)Buy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Selle Italia Flite Boost Kit Carbonio SaddleBoasting a more compact shape, carbon rails and an impressively low weight, this saddle celebrates 30 years of history by continuing the tradition of greatness. It features a durable Fibra-Tek cover construction, which makes it more than capable of handling the increased pressure and changes to your riding position, as you battle across unpredictable mixed terrain conditions. Selle Italia has also equipped it with CarboKeramic (carbon) rails that allow you to benefit from their superior strength to weight ratio, whatever your riding discipline. Weighing in at only 180g (large version), this is a great choice of upgrade for riders who want maximum performance without any unnecessary weight.Updated Flite LogoA revised Flite logo, to relive the history and successes of a legendary product. A saddle that has supported and still supports champions such as Mathieu Van Der Poel, Caleb Ewan, Philippe Gilbert and many others.Flat and Boost ShapeThe Flite Boost resumes the classic “Flat” shape that has always distinguished the Flite family to guarantee, together with a more compact shape (250mm of length), the usual performance and maximum stability while pedalling.Saddle InfoThe updated visible shell of the Flite Boost allows it to make visible and always usable some technical details of the saddle, such as width and length. Further detail for an excellent product.Features: Cover Material: Fibra-Tek Rail Material: Carbon (+10mm) Use: Road, Racing, Endurance and MTB Dimensions: S: 135x250mm; L: 145x250mm Category: Performance Lightweight Flat Boost shape Manufacturer's Part Numbers: Black S S1: 017A120ICA011; Black L L1: 017A320ICA011 Weight: L: 180g (large version)Buy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Selle Italia Flite Boost Kit Carbonio SaddleBoasting a more compact shape, carbon rails and an impressively low weight, this saddle celebrates 30 years of history by continuing the tradition of greatness. It features a durable Fibra-Tek cover construction, which makes it more than capable of handling the increased pressure and changes to your riding position, as you battle across unpredictable mixed terrain conditions. Selle Italia has also equipped it with CarboKeramic (carbon) rails that allow you to benefit from their superior strength to weight ratio, whatever your riding discipline. Weighing in at only 180g (large version), this is a great choice of upgrade for riders who want maximum performance without any unnecessary weight.Updated Flite LogoA revised Flite logo, to relive the history and successes of a legendary product. A saddle that has supported and still supports champions such as Mathieu Van Der Poel, Caleb Ewan, Philippe Gilbert and many others.Flat and Boost ShapeThe Flite Boost resumes the classic “Flat” shape that has always distinguished the Flite family to guarantee, together with a more compact shape (250mm of length), the usual performance and maximum stability while pedalling.Saddle InfoThe updated visible shell of the Flite Boost allows it to make visible and always usable some technical details of the saddle, such as width and length. Further detail for an excellent product.Features: Cover Material: Fibra-Tek Rail Material: Carbon (+10mm) Use: Road, Racing, Endurance and MTB Dimensions: S: 135x250mm; L: 145x250mm Category: Performance Lightweight Flat Boost shape Manufacturer's Part Numbers: Black S S1: 017A120ICA011; Black L L1: 017A320ICA011 Weight: L: 180g (large version)Buy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Whether you're into endurance cycling or mountain bike (MTB) adventure riding, this high-quality saddle's CarboKeramic (carbon) rails allow you to benefit from their superior strength to weight ratio, whatever your discipline. By using carbon, this model delivers fantastic stiffness and strength when climbing without adding any unnecessary weight to your ride when descending. Selle Italia has also equipped this model with a hard-wearing Fibra-Tek cover construction, which makes it more than capable of handling the increased pressure and changes to your riding position as you battle across unpredictable mixed terrain conditions. Engineered for maximum performance, the large option of this saddle weighs in at only 180g, so whatever choice you make you can be assured that you won't have to worry about adding any unnecessary grams to your ride. Updated Flite Logo A revised Flite logo, to relive the history and successes of a legendary product. A saddle that has supported and still supports champions such as Mathieu Van Der Poel, Caleb Ewan, Philippe Gilbert and many others. Flat and Boost Shape The Flite Boost resumes the classic “Flat” shape that has always distinguished the Flite family to guarantee, together with a more compact shape (250mm of length), the usual performance and maximum stability while pedalling. Saddle Info The updated visible shell of the Flite Boost allows it to make visible and always usable some technical details of the saddle, such as width and length. Further detail for an excellent product. Manufacturer's Part Numbers: 017A120ICA011 Black S S1 017A320ICA011 Black L L1
Ready for the most demanding of riding conditions, this versatile saddle is kitted out with a Fibra-Tek cover construction for exceptional strength, durability and comfort on every ride. Whether you're into endurance cycling or mountain bike (MTB) adventure riding, this high-quality saddle's CarboKeramic (carbon) rails allow you to benefit from their superior strength to weight ratio, whatever your discipline. By using carbon, this model delivers fantastic stiffness and strength when climbing without adding any unnecessary weight to your ride when descending. Engineered for maximum performance, this version is also equipped with Selle Italia's renowned Superflow technology, which uses its large central cut-out area to relieve pressure around your sit bones. As a result, you'll enjoy going the extra distance with reduced fatigue and increased comfort. Updated Flite Logo A revised logo, to relive the history and victories of a legendary product. A saddle that has supported and still supports champions such as Mathieu Van Der Poel, Caleb Ewan, Philippe Gilbert and many others. Flat and Boost Shape The Flite Boost resumes the classic “Flat” shape that has always distinguished the Flite family to guarantee, together with a more compact shape (250mm of length), the usual performance and maximum stability while pedalling. Superflow The “Superflow” central cut-out allows you to release the pressure from the central area and benefit from greater comfort when pedalling. Manufacturer's Part Numbers: 017A620ICA011 Black S S3 017A920ICA011 Black L L3
Selle Italia FLITE Boost MVDP Carb Superflow SaddleFeaturing a high-quality fibra-tek cover, this Mathieu Van der Poel (MVDP) signature saddle is more than capable of handling all of the pressure and intensity associated with road racing and endurance riding. Selle Italia has also equipped it with carbon rails for a superior combination of stiffness, durability and low weight performance as you conquer every mile of road. Another highlight is it comes race-ready with a Superflow channel that runs down its middle section for relieving pressure from around your sit-bones and reducing numbness and fatigue. Weighing in at only 162g, this is a lightweight choice of upgrade for staying comfortable and supported without adding any unnecessary weight to your ride.A Never Ending TraditionThanks to the collaboration with an undisputed champion, like Mathieu Van der Poel, the tradition is continuing in the best way; and it is from this partnership that the Flite Boost Kit Carbonio Superflow “MVDP edition” is born.Dedicated LogoMade in white, like the Flite Boost usually used by Mathieu during the race, it features a logo with the word MVDP created “ad hoc” for the athlete.Features: Cover Material: Fibra-Tek Rails Material: Carbon rails (+10mm) Use: Road Dimensions: 145x250mm Category: Performance Profile: Flat Gender: Unisex Central Cut Out: Superflow channel id Match: L3 Weight: 162gManufacturer's Part Number: 017A920ICA007 White L3Buy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.