crankbrothers Candy 1 Clipless MTB PedalsReady to tear up the toughest trails, the tough and versatile Candy 1 clipless mountain bike pedals make the most of each crank rotation. Their open design sheds mud easily and with four-sided engagement, you can simply stamp your foot down to connect. Plus, the 10-degree release angle gives the ideal amount of float for position changes and easy disengagement. crankbrothers has made them from a light but tough composite that’s combined with stainless steel wings and a Chromoly (CrMo) axle, so they can withstand plenty of abuse and come back for more.Features: Body Material: One-piece CompositeAxle Material: Forged SCM435 high strength Chromoly (CrMo)Axle Size: Standard 9/16" threadSpring Material: 300 series Stainless SteelWing Material: Stamped SteelEnd Cap: SlottedBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Shimano Pedalling Dynamics (SPD) type Brass cleats with shims includedCleats Included: YesQ-Factor: 52mmRelease Angle: 10°Use: Cross Country (XC), Trail, Cyclocross (CX) and GravelRibbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Alternative cleats available for increased release angle of 15° (sold separately)Warranty: 5 yearsWeight: 294g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Full Cut Helmet is a retro masterpiece, raised by the godfathers of action sports and now back in demand it's better than ever. Depending on colour the shell is either constructed from high-impact ABS or high-density polyethylene, lined with EPS foam and outfitted with compression molded pads to ensure the Full Cut is comfortable. Eleven open vents across the helmet let airflow in and out to keep you riding longer without feeling uncomfortable. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older Size guide: X-Small: 52 - 54cm Small: 54 - 56cm Medium: 56 - 58cm Large: 58 - 60cm X-Large: 60 - 62cm
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 5 years,Weight: 324g per pair,Spindle: Forged scm435 chromoly steel,Body: 2 piece machined aluminium,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Bushing,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colours: Orange/Silver or Silver,.You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Features: Ribbed body for better traction when unclipped Four-sided entry and superior mud shedding Customisable float & release angle Premium bearings & double seal system Snap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)
crankbrothers Candy 2 Clipless Mountain Bike PedalsDesigned for optimised control and performance when tackling tough mountain bike trails, the Candy 2 Clipless Pedals from crankbrothers are ready for the challenge. Benefiting from a lightweight, aluminium construction, they feature four-sided entry and an exceptional mud-shedding quality, to help keep you going in all-weather conditions. Features: Body Material: 6061-T6 Aluminium Spindle Material: Forged 435 Chromoly (CrMo) Spring Material: 300 series Stainless Steel Wing Material: Stamped Steel End cap: Slotted Bearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearing Cleats Type: Premium Brass cleats with shims includedCleats Included: YesQ-Factor: 52mm Release Angle: 15°/20° Ribbed body for better traction when unclipped Four-sided entry and superior mud-shedding Customisable float & release angle Premium bearings & double seal system Snap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Weight: 355g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 324g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Orange/Silver or Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
crankbrothers Candy 3 Clipless Mountain Bike PedalsWith a lightweight aluminium platform built to resist rock strikes, stainless steel wings and alloy end caps with hex fitting, the Candy 3 Clipless pedals have been designed with durability in mind. The crankbrothers Shimano Pedalling Dynamics (SPD) system connects from four sides, has superior mud-shedding ability and a customisable release angle. The Candy 3 are an incredibly versatile set of pedals that excel in all conditions.Features:Body Material: 6061-T6 AluminiumSpindle Material: Forged SCM435 Chromoly (CrMo)Spindle Size: Standard 9/16"Spring Material: 300 series Stainless-SteelWing Material: 17-4PH Stainless-SteelEnd Cap Material: Hex alloyBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Brass Shimano Pedalling Dynamics (SPD) cleats with shims (included)Q-Factor: 52mmRelease Angle: 15°/20°Ribbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release angleHex alloy end cap for enhanced durabilityPremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Weight: 340g (pair)Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 3 Clipless Mountain Bike PedalsWith a lightweight aluminium platform built to resist rock strikes, stainless steel wings and alloy end caps with hex fitting, the Candy 3 Clipless pedals have been designed with durability in mind. The crankbrothers Shimano Pedalling Dynamics (SPD) system connects from four sides, has superior mud-shedding ability and a customisable release angle. The Candy 3 are an incredibly versatile set of pedals that excel in all conditions.Features:Body Material: 6061-T6 AluminiumSpindle Material: Forged SCM435 Chromoly (CrMo)Spindle Size: Standard 9/16"Spring Material: 300 series Stainless-SteelWing Material: 17-4PH Stainless-SteelEnd Cap Material: Hex alloyBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Brass Shimano Pedalling Dynamics (SPD) cleats with shims (included)Q-Factor: 52mmRelease Angle: 15°/20°Ribbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release angleHex alloy end cap for enhanced durabilityPremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Weight: 340g (pair)Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The clip mechanism includes four-sided entry, superior mud shedding ability, and a customisable release angle making the crankbrothers Candy 3 an incredibly versatile set of pedals that excel in all conditions. Features: Ribbed body for better traction when unclipped Four-sided entry and superior mud shedding Customisable float & release angle Hex alloy end cap for enhanced durability Premium bearings & double seal system Snap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 5 years,Weight: 304g per pair,Spindle: Forged scm435 chromoly steel,Body: 2 piece machined aluminium,Wings: Cast Steel,Spring: 300 series stainless steel,Inner bearing: Needle,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colour options: Black/Silver, Blue/Silver or Red/Silver,.You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
crankbrothers Candy 3 Clipless Mountain Bike PedalsWith a lightweight aluminium platform built to resist rock strikes, stainless steel wings and alloy end caps with hex fitting, the Candy 3 Clipless pedals have been designed with durability in mind. The crankbrothers Shimano Pedalling Dynamics (SPD) system connects from four sides, has superior mud-shedding ability and a customisable release angle. The Candy 3 are an incredibly versatile set of pedals that excel in all conditions.Features:Body Material: 6061-T6 AluminiumSpindle Material: Forged SCM435 Chromoly (CrMo)Spindle Size: Standard 9/16"Spring Material: 300 series Stainless-SteelWing Material: 17-4PH Stainless-SteelEnd Cap Material: Hex alloyBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Brass Shimano Pedalling Dynamics (SPD) cleats with shims (included)Q-Factor: 52mmRelease Angle: 15°/20°Ribbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release angleHex alloy end cap for enhanced durabilityPremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Weight: 340g (pair)Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 304g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Cast Steel Spring: 300 series stainless steel Inner bearing: Needle Outer bearing: Cartridge Maximum rider weight: No restrictions Colour options: Black/Silver Blue/Silver or Red/Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.