The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 272g per pair Spindle: Forged scm435 chromoly steel Body: one piece composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Black Blue Red or Neon Green As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers Carl and Frank were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated…. It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes. There is an ongoing debate amongst many riders about which is best candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab jump off the bike or quickly get clipped in again and put the power down. Excellent mud-shedding: the design is very open. Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Chamfered edges help reduce rock strikes Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). candy 7 Weight (per pair) 320g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 324g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Orange/Silver or Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 304g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Cast Steel Spring: 300 series stainless steel Inner bearing: Needle Outer bearing: Cartridge Maximum rider weight: No restrictions Colour options: Black/Silver Blue/Silver or Red/Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Sleeves snap on to the next gen candy and eggbeaters to tighten the interface between the shoe and pedal. Includes: 1mm 2mm 3mm sleeves Compatible with candy and eggbeater 11 3 and 2
Traction pads replacement kit to refresh your pedals. Kit includes: 8x 1mm traction pads 8x 2mm traction pads Compatible with; Candy 2/3 (2016 - present)
Traction pads replacement kit to refresh your pedals. Kit includes: 8x 1mm traction pads 8x 2mm traction pads Compatible with; Candy 7 & 11 (2016 - present)
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers Carl and Frank were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The candy 11 pedal is a clipless pedal with a small platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. There is an ongoing debate amongst many riders about which is best candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab jump off the bike or quickly get clipped in again and put the power down. Excellent mud-shedding: the design is very open. Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Extremely lightweight: pedal design is very simple with only a few key parts. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). candy 11 Weight (per pair) 249g Spindle 6al / 4v titanium Body 6061-T6 aluminium Wings 6al / 4v titanium Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
The Crank Brothers Candy 1 Pedals are an iconic pedal designed by Carl and Frank, the original founders of Crank Brothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated .It started with a simple question: what is the best way to attach a shoe to a crank To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. Cleat: Premium brass cleats includedShims: IncludedRelease Angle: 15° to 20°Warranty: 2 yearsWeight: 272g per pairSpindle: Forged scm435 chromoly steelBody: one piece compositeWings: Stamped steelSpring: 300 series stainless steelInner bearing: BushingOuter bearing: CartridgeMaximum rider weight: No restrictionsColours: Black, Blue, Red or Neon GreenThe Candy 1 is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4-point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. As with the rest of the Crank Brothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1, 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes.There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Key Features:Excellent mud-shedding: the design is very open.,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Chamfered edges help reduce rock strikes,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..Specifications:Weight (per pair): 320g,Spindle: Forged scm 435 chromoly steel,Body: 6061-T6 aluminium,Wings: 17-4PH stainless,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Release angle: 15° or 20°,Warranty: 5 years.
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 5 years,Weight: 304g per pair,Spindle: Forged scm435 chromoly steel,Body: 2 piece machined aluminium,Wings: Cast Steel,Spring: 300 series stainless steel,Inner bearing: Needle,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colour options: Black/Silver, Blue/Silver or Red/Silver,.You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 5 years,Weight: 324g per pair,Spindle: Forged scm435 chromoly steel,Body: 2 piece machined aluminium,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Bushing,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colours: Orange/Silver or Silver,.You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.