crankbrothers Candy 7 Clip-In PedalsDesigned to increase your pedalling power, these Clip-In Pedals by crankbrothers offer a stable platform that is suitable for use with a variety of cycling disciplines including Mountain Bike (MTB), trail and cyclocross (CX).There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform that is confidence-inspiring and also gives some support for those moments when you’ve unclipped but is unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmCleat Type: Premium brass cleats with shims includedInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyWeight: 320g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ultimate in performance and durability with low stack height and genuinely low weight. Machined from 7050-T6 aluminium with a split-lip seal to keep contaminants out and grease in with less drag.A captured compression ring sets the bearing preload and stays true no matter how you ride (no rocking or creaking) ,Premium split-lip sealed stainless steel bearings give double the protection while decreasing friction,Compatible with Interlock spacers,Hand polished and anodised,Upper/Lower stack: 16/12mm,Weight: 97g.
Make light work of transporting your camping equipment to and from your destination with the Nordisk Cotton Canvas Wagon. This foldable utility cart opens and folds in seconds, quickly and easily, and with its spacious inner capacity and a weight capacity of 100kg, you will quickly have your tent and all your camping gear ready at the campsite in minutes. Plus, large, sturdy wheels make the wagon suitable for a variety of terrain.
Polarized Gascan®Two lenses are cut from the curve of a single lens shield, then mounted in the frame to maintain the original, continuous contour. The look is so unique, we customized our corporate logo just for this eyewear. Lightweight O Matter® frame material offers premium comfort. Peripheral vision is maximized by XYZ Optics®, an innovation that maintains visual clarity at all angles of view. Impact protection meets ANSI Z87.1 standards, and our Three-Point Fit retains the lenses in precise optical alignment. True metal icons sign this Oakley original.Integrated TechnologiesPlutonite® LensOne of the most optically pure materials used in eyewear today, it maximizes clarity and impact resistance while filtering out 100% of all UVA, UVB, UVC and harmful blue light up to 400nm. Not a coating, the UV protection is from the lens material itself.High Definition Optics®High Definition Optics® (HDO®) is a collection of patented technologies that allow Oakley eyewear to meet or exceed the testing standards of the American National Standards Institute for optical clarity, visual fidelity, and impact resistance.Impact ProtectionBacked by decades of innovation, Oakley performance eyewear offers uncompromising protection against high-velocity and high-mass impact. The protection is a benefit of the premium materials and unique architectures of Oakley lens/frame combinations.UV ProtectionEye damage attributed to ultraviolet light includes cataracts, pterygium and macular degeneration. Our Plutonite® lens material filters out 100% of all UVA, UVB, UVC and harmful blue light up to 400nm. The protection is from the lens material itself.Three-Point FitA patented innovation that ensures the frame makes contact only at the bridge of the nose and the sides of the head. It holds lenses in precise optical alignment with a secure fit that eliminates the pressure points common with frames that hook the ears.O-Matter™A stress-resistant frame material that withstands environmental extremes, it is lightweight yet highly durable. Controlled flexibility enhances impact resistance while contributing to the all-day comfort of frames made with this innovative synthetic.Oakley HDPolarized®Improving safety, comfort and performance, Oakley HDPolarized lenses filter out 99% of reflected glare without the haze and optical distortion that can come with polarized lenses made with conventional manufacturing techniques.Iridium®Designed to balance light transmission and reduce glare, this premium lens coating is made with superheated metal oxides. It is available in a spectrum of colors for optimizing vision in virtually any light condition.
Original Cannondale Hollowgram SL 27 Knot carbon seatpost with 15mm offset. Fits bikes requiring the Truncated Aero Profile seatpost like the 2019 generation SuperSix EVO and CAAD13. 65mm minimum frame insertion required Carbon fiber construction Two bolt head design for easy and precise adjustment 15mm offset Fits 2019 generation SuperSix EVO and CAAD13 bikes Weight as pictured: 168 grams
Cannondale Hollowgram SL 27 Knot carbon seatpost with 0mm offset. Fits bikes requiring the Truncated Aero Profile seatpost like the 2019 generation SuperSix EVO and CAAD13.65mm minimum frame insertion requiredCarbon fiber constructionTwo bolt head design for easy and precise adjustment0mm offsetFits 2019 generation SuperSix EVO and CAAD13 bikesWeight as pictured: 165 grams
Ride Aware. Like a vigilant ride-partner the integrated Garmin Varia radar keeps a watchful eye on the road behind alerting you to the relative speed and proximity of approaching vehicles so that you can relax and enjoy the road ahead.
crankbrothers Candy 7 Clipless MTB PedalsDesigned for competition use but excellent for all-round use, the crankbrothers Candy 7 Clipless MTB Pedals feature a clip mechanism that includes four-sided entry, superior mud shedding ability, and a customisable release angle.Durable Body with Increased Service LifeSpecial attention to detail has been paid to create an especially durable body with chamfered edges to reduce the chance of rock-strikes. The wings and springs of the pedals are made from Stainless Steel to resist corrosion and improve durability. Even the end cap has a bash guard to increase the service life of the pedals.Features: Body Material: 6061-T6 Aluminium Spindle Material: Forged scm 435 CrMo Spring Material: 300 series Stainless Steel Wing Material: 17-4PH Stainless Steel End cap: Hex alloy Bearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearing Cleats: Premium Brass cleats with shims included Q-Factor: 52mm Release Angle: 15°/20° Integrated traction pad technology to optimise the shoe/pedal interface Ribbed body for better traction when unclipped Chamfered edges to reduce rock-strikes Four-sided entry and superior mud shedding Customisable float & release angle Hex alloy end cap and bashguard Premium bearings & double seal systemWeight: 320g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 7 Clip-In PedalsDesigned to increase your pedalling power, these Clip-In Pedals by crankbrothers offer a stable platform that is suitable for use with a variety of cycling disciplines including Mountain Bike (MTB), trail and cyclocross (CX).There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform that is confidence-inspiring and also gives some support for those moments when you’ve unclipped but is unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmCleat Type: Premium brass cleats with shims includedInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyWeight: 320g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1, 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes.There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Key Features:Excellent mud-shedding: the design is very open.,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Chamfered edges help reduce rock strikes,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..Specifications:Weight (per pair): 320g,Spindle: Forged scm 435 chromoly steel,Body: 6061-T6 aluminium,Wings: 17-4PH stainless,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Release angle: 15° or 20°,Warranty: 5 years.
This smaller version of the Volcano features a 25mm offset with the same ovalized steerer tube crown that is internally and externally CNC machined, with triple butted legs that have clearance for 2.40” tires and pegs! ###section### Product Specs Steerer Length: 160mm Wheel Size: 18" Material: 4130 CRMO / SEAMLESS / SANKO TRIPLE BUTTED Dropout Size: 14mm Offset: 25mm Weight: 900G / 2 LB (TOP BOLT INCLUDED)
For over 20 years, Cane Creek's Thudbuster has been the industry standard in suspension seat posts by providing unequalled comfort and reliability to riders around the world. Travel: 50mm (1.97")Seat clamp: Single bolt fastening and angle adjustment designElastomer: 2-piece design, tool-free inner elastomer changes for various rider weightPivots: Threaded, serviceable, hard anodized aluminium axles flanged PTFE bushingsRider Weight Limit: 150kg/330lbSizes: 27.2mm, 30.9mm, 31.6mm (additional diameters available with shim)Length: Minimum 100mm, Maximum 274mmWeight: 580g (31.6mm)The Thudbuster G4 is superior to its predecessor in every way. Building on Thudbuster s proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, additional suspension travel, a single bolt seat clamp design as well as ease of use through tool-free elastomer change. By improving on this already legendary design, we re confident to say that the Thudbuster G4 is the most advanced suspension seatpost ever made.