Replacement brake blocks for cantilever brakes. Also suitable for some types of V-type brakes. Excellent value for money No squeal and long life performance even in the most adverse weather conditions
A good looking floor-to-ceiling bike rack that carries two bikes as standardCan be upgraded to carry four bikes; extra bikes kits are availableConstructed from beautiful furniture grade American red Oak from sustainable sources with a hand-rubbed oil stain finish to show off the grain of the woodMinimum ceiling height required is 7 feet / 2.13 metres and the maximum is 10 feet / 3 metres; assembled width is 14.5 inches / 37 cm and depth 9.5 inches 24 cmVinyl coated arms hold and protect your bike and are adjusted independently to fit many shapes and sizes of frameVelcro straps provided to stabilise the front wheel of your bikeHeld in place with a tension mounting system with a maximum recommended weight of 200 lbs / 90 kgsAll assembly hardware is included and some simple DIY is required
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 272g per pair Spindle: Forged scm435 chromoly steel Body: one piece composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Black Blue Red or Neon Green As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers Carl and Frank were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated…. It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes. There is an ongoing debate amongst many riders about which is best candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab jump off the bike or quickly get clipped in again and put the power down. Excellent mud-shedding: the design is very open. Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Chamfered edges help reduce rock strikes Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). candy 7 Weight (per pair) 320g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 324g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Orange/Silver or Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Cannondale Single Sided 2Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performance CNC machined from solid 6061 aluminium to exact tolerancesStiffer than any original equipment hanger which improves shifting performanceStill breaks before your frame does to perform its main functionAll hangers come with instuctions and hardwareDirect replacement for original equipment with guaranteed fitBlack anodised for extra scratch and damage resistanceLaser etched for easy part identification
Shimano CX50 Cantilever brake for road leversCable pull matches that of Super SLR drop bar levers making them compatible with Road STI leversIdeally suited to cyclo-cross offering good mud clearance yet still maintaining low profileCan be used for cyclo-cross touring Audax and flat handlebar road bikes with wide tyresEasy set-up and adjustment**Not compatible with V-brake levers**
The Vulcanizing Patch Kit includes six thin and flexible patches with tapered edges to blend perfectly with the profile of the inner tubeFour round patches are 25 mm in diameter for smaller holesTwo oval patches 25 mm x 35 mm are for wider cutsA tube of self-vulcanizing fluid chemically bonds the patch to the tube for a permanent repairEach kit is packaged in a small plastic box with sandpaper for cleaning the tube and instructions
The new Hunter helmet is designed for the rider wanting a well ventilated light weight and durable helmet. Built for fast descents and long technical climbs with a ‘just-right’ fit and modern styling.This is the perfect helmet for trail riders XC racers and those wanting to explore further than the beaten path.Features:» Highly vented to increase cooling» 14 vents» Dropped rear for added protection» One piece visor» One-hand fit system
Cannondale Derailleur Hanger QR ST SS 027 for the following bike models: CAAD12 CAAD8 CAADX Hooligan Optimo Quick Quick Carbon Quick CX Slice Synapse (Alloy) *Please note that depending on the year model of your bike it may not be a match please feel free to call to confirm'
A STYLISH PANNIER PAIR COMBINING CLASSIC STYLING WITH MODERN DESIGN AND WATER-RESISTANT WAXED FINISH. 20 litre capacity per pannier Altura Heritage 40L Cycling Panniers blend modern technology with classic styling and for high quality feel and function. Each pannier boasts a generous 20 litre capacity and can be used singularly or as a pair easily attaching to most racks with the Rixen & Kaul Vario pannier fittings. Reflective detailing provides visibility while light loops on both sides of the panniers provide extra visibility points when needed.Crafted from 12oz waxed canvas the finish provides a water-resistance to help protect the items within. The waxed canvas lid with Woojin buckle and internal draw cord closed act together to keep items inside your pannier and the rain off. Internally the panniers are spacious and have an internal pocket to securely store items a zipped quick access pocket on the lid is provided for frequently needed gels maps or chargers.A shoulder strap is provided to make carrying these panniers easy when you are off the bike. 12oz water resistant waxed canvas Rixen Kaul Vario pannier fittings 20 litre capacity per pannier Lid closure with Woojin two tone buckle Internal draw cord closure Large zippered lid pocket with key clip and internal pocket Supplied with adjustable shoulder strap Reflective detailing Light loops at each side Main Fabric: 97% Cotton 3% Polyester Secondary Fabric: Lining: 100% Polyester
This is a smaller version of our larger Heritage Pannier crafted from the same 12oz waxed canvas and high quality Rixen Kaul Vario fittings. It also has the same blend of classic style with a modern design with a wide range of features as the larger pannier but is great mounted on a rear rack for commuting or moved to a front rack with the larger pair at the rear when the thrill of adventure calls. 12oz water resistant waxed canvas Rixen Kaul Vario pannier fittings 16 litre capacity Lid closure with Woojin two tone buckle Internal draw cord closure Large zippered lid pocket with key clip and internal pocket Supplied with adjustable shoulder strap Reflective detailing Light loops at each side