The Columbia Triple Canyon II Shorts are a welcome addition to outdoor adventuring days. Constructed with a recycled-blend fabric with added stretch, you can be sure of ease of movement as you head over the trail, while Omni-Wick™ advanced wicking technology keeps you dry, and Omni-Shade™ UPF 50 sun protection keeps harmful sun rays at bay. For optimum practicality multiple pockets also ensure all trail essentials are kept within easy reach.
The Columbia Triple Canyon II EU Pants are a welcome addition to your hiking adventure gear. Made with 50% recycled content, they feature Omni-Shade™ UPF 50 sun protection and Omni-Shield™ advanced resistance for optimum protection from the elements, while multiple pockets allow you to keep trail essentials within easy reach. Articulated knees and leg hem cinches also provide ease of movement and flexibility, so you can move over any trail with ease.
A versatile piece of kit, the Columbia Triple Canyon Full Zip Fleece is ideal for both layering or wearing on its own. Made with a lightweight polyester fleece, it features Omni-Shield™ advanced technology to repel light rain and moisture, alongside a chin guard and thumb loops for extra warmth. A zipped chest pocket and two hand pockets also allow you to keep essentials within easy reach.
The Compressport Hurricane Waterproof 10/10 Jacket delivers the ultimate in waterproof protection with a 10’000 Schmerber construction, sealed seams and waterproof zip. Meanwhile, the jacket is incredibly lightweight, capable of packing down into the smallest of pockets. The ergonomic structure also ensures maximum freedom of movement, utilising 4-way stretch fibres which seamlessly adapt to the body for a race-orientated fit. Care Instructions Hand wash normally Do not bleach Do not tumble dry Do not iron Do not dry clean
The Hurricane 10/10 Pants weigh less than 100 grams and take up almost no space when rolled up, yet their 10'000 Schmerber water-resistant fabric and sealed seams make them perfectly watertight. The fibres remain extremely breathable, ensuring sweat and moisture are evacuated even when the rain is pouring from the sky. Just like the Hurricane 10/10 jacket, the fit is ergonomic with 4-way stretch material allowing total freedom of movement. The minimalist, streamlined design allows for no excess material or rustling noise usually associated with waterproof garments and the pants are easily put on thanks to sealed zips on the lower leg. The waistband fastens with a zip and snap button and features belt loops if required.
Our pro trail runners are unanimous: featherlight and comfortable are the key elements of the Hurricane 10/10 Jacket. At the insistent request of many of our top athletes our design team set out to craft a light waterproof trail jacket which would meet the exacting requirements of ultra-trail equipment lists whilst allowing them to perform at the highest level. The result is the lightest fully-waterproof layer on the market today: 105 grams of protective 4-way stretch material which fits weightlessly to any bodyshape - and over a backpack - whilst guaranteeing total freedom of movement. True to Compessport standards the design is minimalist streamlined and above-all efficient : all seams are waterproofed while the Raglan sleeves are extra-fitted on the forearms to ensure no excess material gets in the way of trees poles or aerodynamics. The close-fitting hood shelters your head without obstructing the view and the ergonomic self-blocking diagonal zip opens easily for quick removal once the clouds roll away. Simply roll the jacket up and pack it into your smallest pocket. Breathable and rustle-free the Hurricane 10/10 is pure watertight performance for your biggest challenges no matter the weather. KEY BENEFITS 100% waterproof & breathable thanks to 10'000 Schmerber water-resistant fabric sealed seams and zip combined with efficient sweat-wicking fibers. Ultralight & packable: the lightest fully-waterproof jacket on the market today which folds up and disappears into the smallest of pockets. Incredibly comfortable and ergonomicthanks to the 4-way stretch fibers which adapt seamlessly to the body for a race-oriented fit and total freedom of movement.
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 272g per pair Spindle: Forged scm435 chromoly steel Body: one piece composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Black Blue Red or Neon Green As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers Carl and Frank were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated…. It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes. There is an ongoing debate amongst many riders about which is best candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab jump off the bike or quickly get clipped in again and put the power down. Excellent mud-shedding: the design is very open. Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Chamfered edges help reduce rock strikes Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). candy 7 Weight (per pair) 320g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 324g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Orange/Silver or Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 304g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Cast Steel Spring: 300 series stainless steel Inner bearing: Needle Outer bearing: Cartridge Maximum rider weight: No restrictions Colour options: Black/Silver Blue/Silver or Red/Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Sleeves snap on to the next gen candy and eggbeaters to tighten the interface between the shoe and pedal. Includes: 1mm 2mm 3mm sleeves Compatible with candy and eggbeater 11 3 and 2
Traction pads replacement kit to refresh your pedals. Kit includes: 8x 1mm traction pads 8x 2mm traction pads Compatible with; Candy 2/3 (2016 - present)