Cane Creek introduces more travel to the eeSilk lineup with the eeSilk+. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. Like our 20mm travel suspension seatpost, eeSilk, the eeSilk+ comes in both alloy and carbon, 27.2 and 31.6 mm options.The new eeSilk+ and eeSilk+ Carbon are performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. These posts make great enhancements to long gravel rides by reducing chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple external elastomer change.The new eeSilk+ features stainless steel hardware and weighs less than 381g for the alloy post and less than 335g for the carbon post. eeSilk+ comes with an increased seatpost length of 387mm and eeSilk+ Carbon comes with a length of 362mm. The eeSilk+ Carbon comes with the same titanium hardware and custom titanium thumbwheel as the eeSilk Carbon.Like its shorter travel sister, eeSilk+ comes with 300-series stainless steel axles and IGUS bushings that sit within the Seatpost head and cradle to make for a more serviceable and quiet pivot design.Carbon or aluminium options,Forged and machined aluminium arms,Stainless steel pivots and axles with improved IGUS bushings,Interchangable elastomer for rider tuned spring rate,Di2 battery compatible,Travel - 35mm,Sizes: 27.2 and 31.6 (shims available for other sizes),Length: Carbon - 362mm, Alloy - 387mm,Layback (offset) - 12mm,Weight: Carbon 323g (27.2) 333g (31.6), Alloy 373g (27.2) 378g (31.6),Max rider weight - 113kg (250lbs).
Cannondale Hollowgram SAVE SystemBar made to work with the Hollowgram SAVE stem. Get the look and speed of a 1-piece system with the adjustability of a 2-piece system Ergonomic flat top section for comfortable riding Ports to route cables and wires inside the bar for a clean look Weight: 292 grams in 44cm configuration Mounting hardware not included with handlebar Sizes Available: 36cm 38cm 40cm 42cm 44cm
A good looking floor-to-ceiling bike rack that carries two bikes as standardCan be upgraded to carry four bikes; extra bikes kits are availableConstructed from beautiful furniture grade American red Oak from sustainable sources with a hand-rubbed oil stain finish to show off the grain of the woodMinimum ceiling height required is 7 feet / 2.13 metres and the maximum is 10 feet / 3 metres; assembled width is 14.5 inches / 37 cm and depth 9.5 inches 24 cmVinyl coated arms hold and protect your bike and are adjusted independently to fit many shapes and sizes of frameVelcro straps provided to stabilise the front wheel of your bikeHeld in place with a tension mounting system with a maximum recommended weight of 200 lbs / 90 kgsAll assembly hardware is included and some simple DIY is required
Nick Bruce signature frame from Total BMX. Built for a beast of a rider who always goes that bit bigger than everyone else, the Americano had to be strong yet light enough to be ridden in Nick’s technical but burly style. Total and Nick worked hard to get the frame to ride good and be durable, a frame he could believe in as he pedalled towards that next banger. The 'DBS' brake mod was added which works a treat and simplifies the lower brake cables of a gyro, this mod was originally designed by Nick's Total BMX team mate Mark Webb but has been refined for the production model Americano frame. ###section### Product Specs MATERIAL: Full 4130 Chromoly HEAD TUBE ANGLE: 75.1° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 13.3" BB HEIGHT: 11.5" WHEEL SIZE: 20" STANDOVER HEIGHT: 8.25" DROPOUT SIZE: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Removable GYRO TABS: Removable WEIGHT: 4.9lbs ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Great for all riding but excels at Park riding High-quality Chromoly construction Seamless Japanese Sanko Tubing Integrated seat post clamp ###shogun-image-section###
Cannondale carbon fiber seatpost with 0mm offset for 2019 generation SystemSix bikes. Reflective Hollowgram graphic on the back of the post for that extra visibility you need. 330mm length from center of seat rail clamp to bottom tip of post. Requires 65mm minimum insertion. Weight as pictured: ~221 grams NOTE: This post comes in Matte Black not Gloss Black.
For over 20 years, Thudbuster has been the industry standard in suspension seatposts by providing unequaled comfort and reliability to riders around the world. We are now proud to announce the latest evolution to that legacy with the Thudbuster Generation 4 (G4).The new Thudbuster LT is superior to its predecessor in every way. Building on Thudbuster’s proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we’re confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. Key Features: Travel: 90mm (3.54"),Seatclamp: Single bolt fastening and angle adjustment design,Elastomer: 2-piece design, tool-free inner elastomer change for various rider weight,Pivots: Threaded, serviceable, hard anodized aluminum axles flanged PTFE bushings,Rider Weight Limit: 115kg/250lb,Sizes: 27.2mm, 30.9mm, 31.6mm (additional diameters available with shim),Length: 420mm (30.9 & 31.6), 390mm (27.2),Extension: Minimum - 146mm, Maximum - 320mm (30.9 & 31.6) / 290mm (27.2),Weight: 750g (31.6mm) .
For over 20 years, Thudbuster has been the industry standard in suspension seatposts by providing unequaled comfort and reliability to riders around the world. The Thudbuster G4 is superior to its predecessor in every way. Building on Thudbuster’s proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, additional suspension travel, a singlebolt seat clamp design as well as ease of use through tool-free elastomer change.By improving on this already legendary design, we’re confident to say that the Thudbuster G4 is the most advanced suspension seatpost ever made.Key Features:Travel: 50mm (1.97"),Seatclamp: Single bolt fastening and angle adjustment design,Elastomer: 2-piece design, tool-free inner elastomer change for various rider weight,Pivots: Threaded, serviceable, hard anodized aluminum axles flanged PTFE bushings,Rider Weight Limit: 150kg/330lb,Sizes: 27.2mm, 30.9mm, 31.6mm (additional diameters available with shim),Length: Minimum 100mm, Maximum 274mm,Weight: 580g (31.6mm) .
The all-new AngleSet threadless headset makes it possible to change the game. With Angleset the head angle of a mountain bike can be transformed with ease, as the lowstack-height AngleSet offers up to six offset angle adjustments.With steeper or slacker adjustments from 0.5 to 1.5 degrees, dialing in the perfect geometry to attack the trail is a breeze. The patent-pending design of AngleSet is head-tube length independent and fits most popular head-tube standards.A self-aligning feature between the bearings and the steerer-tube ensures a perfect fit and makes fork installation a snap.
Cane Creek Thudbuster LT G4 Seat PostDesigned for smooth, supportive and reliable performance, this suspension seatpost is ideal for everything from touring across the city on your road bike to exploring the countryside on your drop bar gravel bike. It features a hard-wearing forged aluminium build, which gives it excellent toughness when travelling across mixed terrain conditions. Suitable for a wide range of riding disciplines, this model is also compatible with electric bikes (E-bikes).Bolt-On ComfortFor over 20 years, Thudbuster has been the bicycle industry-standard in suspension seatposts by providing unequalled comfort and reliability to riders around the world.Suspension SeatpostThe latest generation Thudbuster LT is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design.By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made.Parallel Linkage DesignThe Thudbuster Parallel Linkage technology stays in the direct path of the natural travel of the rear wheel. As a bump lifts the back of a bicycle, the rear wheel pushes up and forward into the rider. The Thudbuster works by compressing along the exact opposite path — down and rearward — absorbing force at the same rate. This results in a natural suspension feel without being overly active and allows for more travel without compromising pedalling position.Features: Seatpost Material: Forged Aluminium Use: Road, Gravel, Touring and Electric Bike (E-Bike) Setback: 5mm Travel: 90mm Seat Clamp: Single bolt fastening and angle adjustment design Pivots: Threaded, serviceable, hard anodised Aluminium axles flanged PTFE bushings Elastomer: Medium firm elastomer pre-installed from the factory. Extra Soft, Soft, Firm, and Extra Firm elastomers sold separately Extension: Minimum: 146mm; Maximum: 290mm (27.2mm option); 320mm (30.9mm and 31.6mm options) Max Rider Weight: 250lbs / 113kg Weight: 750g (31.6mm option)Manufacturer's Part Number: SP7A309 Black 30.9mm 90mm Travel SP7A316 Black 31.6mm 90mm Travel SP7A272 Black 27.2mm 90mm TravelBuy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Whether you're touring across the city or planning your next drop bar gravel bike adventure, this suspension seatpost is engineered for smooth and dependable performance. It features a hard-wearing forged aluminium build, which gives it excellent toughness when travelling across mixed terrain conditions. Suitable for a wide range of riding disciplines, this model is also compatible with electric bikes (E-bikes). Bolt-On Comfort For over 20 years, Thudbuster has been the bicycle industry-standard in suspension seatposts by providing unequalled comfort and reliability to riders around the world. Suspension Seatpost The latest generation Thudbuster LT is superior to its predecessor in every way. Building on Thudbuster’s proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we’re confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. Parallel Linkage Design The Thudbuster Parallel Linkage technology stays in the direct path of the natural travel of the rear wheel. As a bump lifts the back of a bicycle, the rear wheel pushes up and forward into the rider. The Thudbuster works by compressing along the exact opposite path — down and rearward — absorbing force at the same rate. This results in a natural suspension feel without being overly active and allows for more travel without compromising pedalling position. Manufacturer's Part Number: SP7A309 Black 30.9mm 90mm Travel SP7A316 Black 31.6mm 90mm Travel SP7A272 Black 27.2mm 90mm Travel
Version 2 of the popular Volcano fork from Fly. The redefined dropouts are slimmer with a smaller overall size, but still peg friendly. Another update for the Volcano 2 is the Volcano bolt. This bolt uses an insert on the steer tube instead of threads on the steer tube to make the fork even stronger. The fork also includes a cone washer for smoother headset tightening. ###section### Product Specs Steerer Length: 155mm Wheel Size: 20" Material: 4130 Chromoly Dropout Size: 14mm Offset: 30mm/33mm Weight: TBC
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers Carl and Frank were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated…. It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes. There is an ongoing debate amongst many riders about which is best candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab jump off the bike or quickly get clipped in again and put the power down. Excellent mud-shedding: the design is very open. Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Chamfered edges help reduce rock strikes Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). candy 7 Weight (per pair) 320g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years