If you've got a Campag multiple speed rear wheel and you want to run single speed for a while, just switch the multiple speed cassette for this simple cog and spacer kit. (*and ensure you can either adjust or tension the chain suitably).The large 10mm wide foot on the CNC machined and drilled steel cog spreads the load over a greater surface area than a straight single cog and will significantly reduce the risk of the cog biting into your alloy freehub splines.The superlight drilled, splined alloy spacers are offset to allow a degree of chainline adjustment.Supplied with an 18T cog. (16 and 17T sizes are available separately).Campag 9/10spd hub fitting.CNC machined steel Cog.Superlight drilled cog and spacers.10mm wide foot avoids damage to freehub.Variable chainline offset.5/64" Teeth fits 1-9speed chains..
The Haglofs Camp Tee is a classic, versatile short-sleeved T-shirt. Made with 100% organic cotton, it features signature logo detail alongside an adventure-inspired graphic print at the side. Perfect for everyday use. Care Instructions Machine wash 40, mild process. Wash with similar colours. Wash inside out. Do not use fabric softener. Do not bleach. Do not tumble dry. Iron, low. Iron on reverse. Do not dry clean. Stretch lengthwise when wet.
The Hope RS4 2-Pawl Freehub Assembly allows you to convert your Hope RS4 hubs and wheels to use with your preferred or existing cassette or to replace due to wear and tear. The 2-pawl design offers reduced drag compared to a 4-pawl design, saving precious watts when out on the road where rapid engagement is less of an issue.
The RS4 Road Rear Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with sealed stainless steel cartridge bearings throughout, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. The hub has an axle width of 130mm and is Shimano and Sram cassette compatible. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.2 Pawl ratchet with 44-point engagement (8 Degree)Reduced drag ratchet mechanismMachined from forged 2014 T6 aluminium billetStainless steel bearingsAxle Width 130mm9/10/11 SpeedAluminium freehubShimano / SRAM cassette compatibleApprox. Weight: 262g (32 hole Shimano alloy freehub option)
The RS4 Road Rear Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with sealed stainless steel cartridge bearings throughout, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. The hub has an axle width of 130mm and is Shimano and Sram cassette compatible. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.2 Pawl ratchet with 44-point engagement (8 Degree)Reduced drag ratchet mechanismMachined from forged 2014 T6 aluminium billetStainless steel bearingsAxle Width 130mm9/10/11 SpeedAluminium freehubShimano / SRAM cassette compatibleApprox. Weight: 262g (32 hole Shimano alloy freehub option)
The RS4 Road Rear Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with sealed stainless steel cartridge bearings throughout, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. The hub has an axle width of 130mm and is Shimano and Sram cassette compatible. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.2 Pawl ratchet with 44-point engagement (8 Degree)Reduced drag ratchet mechanismMachined from forged 2014 T6 aluminium billetStainless steel bearingsAxle Width 130mm9/10/11 SpeedAluminium freehubShimano / SRAM cassette compatibleApprox. Weight: 262g (32 hole Shimano alloy freehub option)
The RS4 Road Rear Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with sealed stainless steel cartridge bearings throughout, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. The hub has an axle width of 130mm and is Shimano and Sram cassette compatible. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.2 Pawl ratchet with 44-point engagement (8 Degree)Reduced drag ratchet mechanismMachined from forged 2014 T6 aluminium billetStainless steel bearingsAxle Width 130mm9/10/11 SpeedAluminium freehubShimano / SRAM cassette compatibleApprox. Weight: 262g (32 hole Shimano alloy freehub option)
The RS4 Road Rear Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with sealed stainless steel cartridge bearings throughout, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. The hub has an axle width of 130mm and is Shimano and Sram cassette compatible. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.2 Pawl ratchet with 44-point engagement (8 Degree)Reduced drag ratchet mechanismMachined from forged 2014 T6 aluminium billetStainless steel bearingsAxle Width 130mm9/10/11 SpeedAluminium freehubShimano / SRAM cassette compatibleApprox. Weight: 262g (32 hole Shimano alloy freehub option)
The RS4 Road Rear Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with sealed stainless steel cartridge bearings throughout, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. The hub has an axle width of 130mm and is Shimano and Sram cassette compatible. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.2 Pawl ratchet with 44-point engagement (8 Degree)Reduced drag ratchet mechanismMachined from forged 2014 T6 aluminium billetStainless steel bearingsAxle Width 130mm9/10/11 SpeedAluminium freehubShimano / SRAM cassette compatibleApprox. Weight: 262g (32 hole Shimano alloy freehub option)
The RS4 Road Rear Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with sealed stainless steel cartridge bearings throughout, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. The hub has an axle width of 130mm and is Shimano and Sram cassette compatible. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.2 Pawl ratchet with 44-point engagement (8 Degree)Reduced drag ratchet mechanismMachined from forged 2014 T6 aluminium billetStainless steel bearingsAxle Width 130mm9/10/11 SpeedAluminium freehubShimano / SRAM cassette compatibleApprox. Weight: 262g (32 hole Shimano alloy freehub option)
The RS4 Road Rear Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with sealed stainless steel cartridge bearings throughout, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. The hub has an axle width of 130mm and is Shimano and Sram cassette compatible. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.2 Pawl ratchet with 44-point engagement (8 Degree)Reduced drag ratchet mechanismMachined from forged 2014 T6 aluminium billetStainless steel bearingsAxle Width 130mm9/10/11 SpeedAluminium freehubShimano / SRAM cassette compatibleApprox. Weight: 262g (32 hole Shimano alloy freehub option)
The RS4 Road Rear Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with sealed stainless steel cartridge bearings throughout, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. The hub has an axle width of 130mm and is Shimano and Sram cassette compatible. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.2 Pawl ratchet with 44-point engagement (8 Degree)Reduced drag ratchet mechanismMachined from forged 2014 T6 aluminium billetStainless steel bearingsAxle Width 130mm9/10/11 SpeedAluminium freehubShimano / SRAM cassette compatibleApprox. Weight: 262g (32 hole Shimano alloy freehub option)