Maximum Braking Power, Perfect Modulation To obtain the perfect balance of braking performance, power and modulation the Magura MT Trail Sport model has a well thought out design. The front brake caliper has four pistons to provide exceptional power in an instant. The rear caliper has a two piston setup that provides responsive modulation and a reliable brake feel through even the most demanding of trail situations. Specifications: Shift Mix: Yes Bleed Type: Magura EBT Lever Orientation: Flip-Flop Recommended Rotor: Magura Storm HC Please Note: Rotors and brake adaptors are not included. Technologies: EBT: Magura Easy Bleed Technology guarantees quick and easy bleeding that provides maximum power output and exceptional modulation. Carbotecture: This advanced carbon fibre layup is extremely light, impact-resistant, shatterproof and has the highest degree of stiffness available. Magura Royal Blood Mineral Oil: The bleeding of a Magura brake is not a routine chore, because the Royal Blood hydraulic oil does not absorb water. It in fact lubricates the whole braking system. If ever filling and bleeding is necessary after a fall and repair of the tubing, use only Magura Blood hydraulic oil and never DOT brake liquid.
Fine Control Equipped with a powerful 4-piston forged aluminium caliper that is effortlessly controlled by the ergonomically shaped 2-finger brake lever, you'll be able to finely control your descents (and ascents if you're a bit too trigger happy on your eMTB!) eMTB Specific Disc Brake This brake is also equipped with a mechanical switch within the lever mounting bracket, which activates your brake light and controls the drive cut-out to ensure maximum rider safety. Maximum Braking Power The MT5e features the same technology as seen on Magura's higher-spec MT7 model and also benefits from its motorsport experience, which it has used to successfully bring maximum braking power to e-bikes and high speed pedelecs (pedal electric assisted bikes). Specifications: Master Cylinder Material: Carbotecture Lever Blade Material: Aluminium with switch Caliper Material: Aluminium Hydraulic: Yes Brake Fluid: Magura Royal Blood EBT: Yes BAT/TPA: No Banjo Fitting: Yes 2-Piston: No 4-Piston: Yes Reach Adjust: Yes - 3mm Allen tool Flip-Flop: Yes Shift Mix: Yes Remote Mix: Yes Recommended Rotor: Storm HC Lever Blade: 2-finger ball-end (4-finger, 2-finger and 4-finger ball-end available separately) Tubing: Magura disc tube eBike Switch: Yes Mounting: PM/IS Weight: 399g
This Shimano BR-R8070 road bike disc brake caliper has a sleek design that integrates seamlessly into the profile of your modern bike. Created for use on modern bikes with flat mount caliper mounting points, it can also be adapted with a flat mount to post mount adaptor (sold separately) for frames with post mount points. Click here to view the Shimano Brake Reference Guide.
This Shimano BR-R8070 road bike disc brake caliper has a sleek design that integrates seamlessly into the profile of your modern bike. Created for use on modern bikes with flat mount caliper mounting points, it can also be adapted with a flat mount to post mount adaptor (sold separately) for forks with post mount points. Click here to view the Shimano Brake Reference Guide.
The High power BH90 hose delivers power efficiently to the oversized 22mm glass fibre phenolic pistons optimized for heat insulation, lightweight and stiffness. This set is recommended for use with Ice Tech FREEZA Centre-Lock rotors for optimum braking performance in a choice of 160, 180 and 203 mm. This Kit also contains Aluminium backed resin pads, plus spare olives and insert should you wish to adjust the length of the cuttable hoses. Off-Road Mountain Bike Race Optimised The XTR's disc brake system has race-tuned power and, thanks to a magnesium caliper and master cylinder as well as a carbon lever blade, comes in at a lighter weight. The XTR M9020 Trail brake system is trail-tuned for power and stiffness by using a pre-loaded aluminium caliper and a new Servo-Wave lever with a powerful and stiff carbon-alloy structure. The XTR M9020 Trail Disc Brake comes standard with Ice Technologies radiator pads for further heat reduction.
The R9170 calipers feature the Shimano Flat Mount system for a sleek and aerodynamic profile and Ice Tech pads for improved heat dissipation. They are easy to set up and maintain thanks to their easy bleed system that uses one-way bleeding.
When you flow with gravity your inevitably going to need to stamp on the anchors, these Saint dual diameter 4-piston calipers give immense stopping power and great modulation.
The Shimano M820 hydraulic brake adopts Ice Technologies for heat management including brake pads with aluminium fins. It also had adjustable free stroke and toolless reach adjustment. Plus, it's ready to combine with I-Spec B compatible gear shifters. Please Note: This brake has a 2nd generation I-spec-B lever with Post Mount type caliper
The powerful Shimano XT M8120 mountain bike (MTB) brake includes a rider tuneable lever and four-piston caliper for outstanding stopping power as you navigate around the trails. Its caliper decreases rotor wobbling noise and increases its braking power by 10%, so you'll enjoy a quieter and more precise braking set-up. In addition, its lever enables combination with I-Spec EV gear shifters for an action-packed cockpit layout. There's also an adjustable reach that suits any hand size, type of riding and individual rider preferences. This is a perfect choice of upgrade for dominating every descent and shredding around the trails in style. Technologies: Servo Wave Action: When you pull a Servowave brake lever, initial pad travel is fast, so little lever movement is needed to bring the pads into contact with the rotor. The power multiplication factor then increases rapidly at the pad-to-rim contact so more of the lever stroke is used to apply greater braking power with improved control. Reach Adjust: The brake lever is equipped with a reach adjust mechanism. The distance from the handlebar grip to lever can be adjusted to suit any hand size, type of riding and individual rider preferences. Ice Technologies: The fade, which can occur to disc brake rotors and pads when braking on a long downhill ride, has a negative impact on the braking performance. Shimano has adopted Ice Technologies disc brake rotor and Ice Technologies pad to realise the cooling technology for consistent performance. The clad disc brake rotor blade, which has a 3 layer-sandwich structure of stainless steel, aluminium and stainless steel, provides better radiation performance achieving from 400˚C to 300˚C surface temperature. Also, the radiation fin has been adopted for the pad. Moreover, the clad disc brake rotor blade and the radiator fin provide long pad life, less noise, less fade and lightweight. Four Piston: Disc brake system with the dual diameter opposed-piston caliper design has differently sized pistons in front and in the rear. The system adopts a power transfer system in which the disc brake rotor is pressed by the smaller sized piston at the entrance of the disc brake rotor intake and also by the more powerful larger sized piston at the back. This prevents the wobbling motion of the disc brake rotor and reduces noises significantly. The 4-piston caliper also allows a wider contact area for the disc brake rotor while keeping the size compact, and the efficient location of pads is adjusted as necessary to stabilise the pressure. In combination use with the Servowave lever it provides an incredible 50% more stopping power than the previous model. The advanced Saint/Zee disc brake system, which adjusts to accommodate the different braking styles of different riders, offers stable braking power and excellent modulation. One Way Bleeding: One Way Bleeding was developed for quick and easy prevention of air in Shimano's hydraulic system. Shimano has streamlined the oil route throughout the system to prevent air bubbles from being captured in the system. One-way oil routing plus a funnel tool with mineral oil provides an easy and clean bleeding system. Click here to view the Shimano Brake Reference Guide.
The high-performing Shimano M7100 features a brake lever that gives you more flexibility with an action-packed cockpit layout. Additionally, its quick and easy to install caliper delivers stable and versatile braking control on the most aggressive of runs. Its perfect pairing of a rider tuneable lever and two-piston caliper makes it the ultimate choice of upgrade for phenomenal stopping power and control all over the mountain. Technologies: Servo Wave Action: When you pull a Servo Wave brake lever, initial pad travel is fast, so little lever movement is needed to bring the pads into contact with the rotor. The power multiplication factor then increases rapidly at the pad-to-rim contact so more of the lever stroke is used to apply greater braking power with improved control. Reach Adjust: The brake lever is equipped with a reach adjust mechanism. The distance from the handlebar grip to lever can be adjusted to suit any hand size, type of riding and individual rider preferences. I-SPEC EV: I-SPEC EV creates a clean and action-optimized cockpit that provides greater focus and flexibility for a wider range of riders. Wider adjustment range allows riders of various styles, preferences and body styles to adjust to the optimal position. Ergonomic design, quicker lever access, and light operation enhance rider comfort and concentration. Ice Technologies: The fade, which can occur to disc brake rotors and pads when braking on a long downhill ride, has a negative impact on the braking performance. Shimano has adopted Ice Technologies disc brake rotor and Ice Technologies pad to realize the cooling technology for consistent performance. The clad disc brake rotor blade, which has a 3 layer-sandwich structure of stainless steel, aluminium and stainless steel, provides better radiation performance achieving from 400˚C to 300˚C surface temperature. Also, the radiation fin has been adopted for the pad. Moreover, the clad disc brake rotor blade and the radiator fin provide long pad life, less noise, less fade and lightweight. One Way Bleeding: One Way Bleeding was developed for quick and easy prevention of air in Shimano's hydraulic system. Shimano has streamlined the oil route throughout the system to prevent air bubbles from being captured in the system. One-way oil routing plus a funnel tool with mineral oil provides an easy and clean bleeding system. Click here to view the Shimano Brake Reference Guide.
Enjoy a more controlled ride as you dominate around the mountain and weave between the trails thanks to this models superb four-pistons. With a faster piston retraction as opposed to its previous model, this latest version delivers superior modulation and improved braking performance, so you can get the most out of every ride. In addition, its four-piston design also reduces disc brake rotor wobbling noise and increases its stopping power by 10% when compared to the BR-M8020 caliper. Complete with N03A resin brake pads with Ice-Tech cooling fins, you'll benefit from out-of-this-world stopping power, even on the rowdiest trail conditions. Click here to view the Shimano Brake Reference Guide.
This tough model is constructed from aluminium which makes it ideal for withstanding the abuse which comes with trail riding. Stable and versatile, you'll benefit from its superior modulation which gives you excellent control on the rowdier terrain sections. Furthermore, its quicker piston retraction delivers more accurate operation, so you can ride more efficiently and confidently. Technologies: Ice Technologies: The fade, which can occur to disc brake rotor and pad when braking on a long downhill ride, has a negative impact on the braking performance. Shimano has adopted Ice Technologies disc brake rotor and Ice Technologies pad to realise the cooling technology for consistent performance. The clad disc brake rotor blade, which has a 3 layer-sandwich structure of stainless steel, aluminium and stainless steel, provides better radiation performance achieving from 400˚C to 300˚C surface temperature. Also, the radiation fin has been adopted for the pad. Moreover, the clad disc brake rotor blade and the radiator fin provide long pad life, less noise, less fade and lightweight. One Way Bleeding: One Way Bleeding was developed for quick and easy prevention of air in our hydraulic system. We have streamlined the oil route throughout the system to prevent air bubbles from being captured in the system. One way oil routing plus a funnel tool with mineral oil provides an easy and clean bleeding system. Click here to view the Shimano Brake Reference Guide.