Caffélatex Injector injects sealants through the valve, in a controlled, fast and clean way. It works for both Presta (removing or not the valve-core) and Schrader valves, and comes with a long tube for easier operation. EXCLUSIVE FEATURES: Works with Presta and Schrader valve type Robust construction for high durability (if washed after every use)
With tubeless tyres becoming more and more prevalent, never has there been a better time to invest in tyre sealant. Effetto Mariposa's Caffelatex Tyre Sealant is an innovative sealant that has long been proven at the highest level on and off-road. Highly effective tyre sealant that lasts up to 2 years in a tubular tyreFoaming action when wheel is turning helps to prevent puncturesMicroscopic silicate particles also help to provide quicker sealing, resulting in less air loss when you punctureSeals holes up to 5mm on an MTB tubeless tyreContains no ammonia and is non-corrosive, making it safe to use in tubular tyresCaffelatex's formula contains microscopic silicate particles, allowing the sealant more time to seal holes up to 5mm. These particles are so small, at less than 2 microns in diameter, that the sealant is still highly fluid and easily coats the inside of your tyre or tubular. The formula also has a foaming action when the wheel is spinning, further helping to improve the sealing of any punctures.Not only is Caffelatex sealant highly effective at sealing punctures, it is also incredibly durable. Thanks to its innovative formula, the sealant can last up to 2 years depending on the application and the external conditions. When using the sealant in a tubular tyre with a latex inner tube, you can expect the sealant to last between 1-2 years. For tubeless-ready tyres the sealant lasts 4-6 months, so you can go a long time between fill ups and enjoy puncture-free riding for months on end before you need to check if the sealant has dried out. Durable, reliable and excellent at sealing punctures, the Effetto Mariposa Caffelatex tyre sealant is some of the best you can buy.
With tubeless tyres becoming more and more prevalent, more and more riders are enjoying the benefits of tubeless. But what if your rims are not tubeless compatible Effetto Mariposa's Caffelatex Tubeless Tape is the answer, allowing you to convert normal rims to tubeless.Rim tape is incredibly easy to use, converting your rims to tubeless-readyRequires tubeless valves and sealant (Sold separately)Can be used with some non-tubeless-ready MTB tyres not recommended for tube-only road/CX tyresWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather investing in a new set of wheels, the Effetto Mariposa Caffelatex Tubeless Tape allows you to convert your regular inner-tube only wheels to tubeless-ready. Starting with the Caffelatex Tubeless Tape, you can remove your current rim tape or cloth and install the tubeless tape. This is the first step in setting your wheels and tyres up tubeless. The tape helps to make the rim as air tight as possible when combined with the tyre sealant. The width of the tape varies, so you must select the right size for your rim. The S Kit suits rims with an external section of 20-24mm, M suits 25-29mm and L suits 30-34mm wide rims.
The Effetto Mariposa Latex Injector makes setting up your tubeless tyres that little bit easier; no more spilled sealant all over the garage floor!Incredibly easy to useAdd sealant to your tubeless quickly and cleanlySuitable for most brands of tubeless sealantSetting up tubeless tyres can be a bit of a nightmare, but thanks to the Latex Injector, it's now a whole lot easier, faster and cleaner. By directly injecting the sealant through the valve, the injector makes it easier than ever to pump sealant into your tyres, ready for a quick blast of air before you're ready to ride.
With tubeless tyres becoming more and more prevalent, more and more riders are enjoying the benefits of tubeless. But what if your rims are not tubeless compatible Effetto Mariposa's Caffelatex Tubeless Tape is the answer, allowing you to convert normal rims to tubeless.Rim tape is incredibly easy to use, converting your rims to tubeless-readyRequires tubeless valves and sealant (Sold separately)Can be used with some non-tubeless-ready MTB tyres not recommended for tube-only road/CX tyresWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather investing in a new set of wheels, the Effetto Mariposa Caffelatex Tubeless Tape allows you to convert your regular inner-tube only wheels to tubeless-ready. Starting with the Caffelatex Tubeless Tape, you can remove your current rim tape or cloth and install the tubeless tape. This is the first step in setting your wheels and tyres up tubeless. The tape helps to make the rim as air tight as possible when combined with the tyre sealant. The width of the tape varies, so you must select the right size for your rim. The S Kit suits rims with an external section of 20-24mm, M suits 25-29mm and L suits 30-34mm wide rims.
With tubeless tyres becoming more and more prevalent, never has there been a better time to invest in tyre sealant. Effetto Mariposa's Caffelatex Tyre Sealant is an innovative sealant that has long been proven at the highest level on and off-road. Highly effective tyre sealant that lasts up to 2 years in a tubular tyreFoaming action when wheel is turning helps to prevent puncturesMicroscopic silicate particles also help to provide quicker sealing, resulting in less air loss when you punctureSeals holes up to 5mm on an MTB tubeless tyreContains no ammonia and is non-corrosive, making it safe to use in tubular tyresCaffelatex's formula contains microscopic silicate particles, allowing the sealant more time to seal holes up to 5mm. These particles are so small, at less than 2 microns in diameter, that the sealant is still highly fluid and easily coats the inside of your tyre or tubular. The formula also has a foaming action when the wheel is spinning, further helping to improve the sealing of any punctures.Not only is Caffelatex sealant highly effective at sealing punctures, it is also incredibly durable. Thanks to its innovative formula, the sealant can last up to 2 years depending on the application and the external conditions. When using the sealant in a tubular tyre with a latex inner tube, you can expect the sealant to last between 1-2 years. For tubeless-ready tyres the sealant lasts 4-6 months, so you can go a long time between fill ups and enjoy puncture-free riding for months on end before you need to check if the sealant has dried out. Durable, reliable and excellent at sealing punctures, the Effetto Mariposa Caffelatex tyre sealant is some of the best you can buy.
Those of you who have seen the dried remains of tubeless sealant in a tyre will know it can be a real pain to remove all remnants. This is where Effetto Mariposa's Caffelatex Remover comes in. Caffelatex Remover is designed to soften or dissolve dried out natural or synthetic latex stains from frames and clothes.Helps to remove tubeless sealant stains from frames and clothesStrong enough to dissolve dried sealant in blocked tubeless valves50ml bottle will be enough to remove plenty of sealant residueContains no dangerous or flammable chemicalsSuitable for use on metals, painted solid surfaces and fabrics, Caffelatex Remover is formulated from non-dangerous or flammable chemicals to remove stubbornly dried on tubeless sealant. By applying a droplet of remover to the affecting area and waiting 10-20 seconds, you can then rinse with water and the sealant will be removed. While not being too strong that it damages surface finishes, the remover is strong enough to help unblock tubeless valves that have become clogged with sealant. Simply put, if you need help removing tubeless sealant from your bike or kit, you need Effetto Mariposa's Caffelatex Remover.
Not all modern mountain bike rims are tubeless compatible, so if you want to take the tubeless plunge but don't want to invest in new wheels, the Effetto Mariposa Caffelatex Tubeless strip is the answer.Lightweight, puncture resistant transparent rim strip makes tubeless conversion easyFit strip and valves to wheels, add sealant to tubeless or tubeless-ready tyres, inflate and go for a rideLong lasting construction can be moved from wheel to wheelSold as a kit including two rim strips and two 40mm tubeless valvesWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather than investing in a new set of wheels, the Effetto Mariposa Caffelatex Rim Strip allows you to convert your regular inner-tube only wheels to tubeless-ready, so you can enjoy puncture-free riding.When using the Caffelatex Rim Strip, you can remove your current rim tape or cloth and install the strip. This is the first step in setting your wheels and tyres up tubeless. The strip helps to make the rim as air tight as possible. When combined with the tyre sealant, this keeps the tyres inflated and more resistant to punctures. The width of the tape varies, so you must select the right size for your rim. The Small Kit suits rims with an external section of 20-24mm, Medium suits 25-29mm and Large suits 30-34mm wide rims. Once the strip and valves are installed you can install your tubeless or tubeless-ready tyres, add your sealant of choice, inflate the tyres and you're good to go! You can finally kiss punctures goodbye. The strips and valves are incredibly durable, so you can easily swap them between wheels if you need to. Thanks to the Effetto Mariposa Caffelatex Rim Strip, you no longer need to have a set of expensive tubeless or tubeless-ready wheels to enjoy the benefits of such a setup.
Not all modern mountain bike rims are tubeless compatible, so if you want to take the tubeless plunge but don't want to invest in new wheels, the Effetto Mariposa Caffelatex Tubeless strip is the answer.Lightweight, puncture resistant transparent rim strip makes tubeless conversion easyFit strip and valves to wheels, add sealant to tubeless or tubeless-ready tyres, inflate and go for a rideLong lasting construction can be moved from wheel to wheelSold as a kit including two rim strips and two 40mm tubeless valvesWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather than investing in a new set of wheels, the Effetto Mariposa Caffelatex Rim Strip allows you to convert your regular inner-tube only wheels to tubeless-ready, so you can enjoy puncture-free riding.When using the Caffelatex Rim Strip, you can remove your current rim tape or cloth and install the strip. This is the first step in setting your wheels and tyres up tubeless. The strip helps to make the rim as air tight as possible. When combined with the tyre sealant, this keeps the tyres inflated and more resistant to punctures. The width of the tape varies, so you must select the right size for your rim. The Small Kit suits rims with an external section of 20-24mm, Medium suits 25-29mm and Large suits 30-34mm wide rims. Once the strip and valves are installed you can install your tubeless or tubeless-ready tyres, add your sealant of choice, inflate the tyres and you're good to go! You can finally kiss punctures goodbye. The strips and valves are incredibly durable, so you can easily swap them between wheels if you need to. Thanks to the Effetto Mariposa Caffelatex Rim Strip, you no longer need to have a set of expensive tubeless or tubeless-ready wheels to enjoy the benefits of such a setup.
Not all modern mountain bike rims are tubeless compatible, so if you want to take the tubeless plunge but don't want to invest in new wheels, the Effetto Mariposa Caffelatex Tubeless strip is the answer.Lightweight, puncture resistant transparent rim strip makes tubeless conversion easyFit strip and valves to wheels, add sealant to tubeless or tubeless-ready tyres, inflate and go for a rideLong lasting construction can be moved from wheel to wheelSold as a kit including two rim strips and two 40mm tubeless valvesWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather than investing in a new set of wheels, the Effetto Mariposa Caffelatex Rim Strip allows you to convert your regular inner-tube only wheels to tubeless-ready, so you can enjoy puncture-free riding.When using the Caffelatex Rim Strip, you can remove your current rim tape or cloth and install the strip. This is the first step in setting your wheels and tyres up tubeless. The strip helps to make the rim as air tight as possible. When combined with the tyre sealant, this keeps the tyres inflated and more resistant to punctures. The width of the tape varies, so you must select the right size for your rim. The Small Kit suits rims with an external section of 20-24mm, Medium suits 25-29mm and Large suits 30-34mm wide rims. Once the strip and valves are installed you can install your tubeless or tubeless-ready tyres, add your sealant of choice, inflate the tyres and you're good to go! You can finally kiss punctures goodbye. The strips and valves are incredibly durable, so you can easily swap them between wheels if you need to. Thanks to the Effetto Mariposa Caffelatex Rim Strip, you no longer need to have a set of expensive tubeless or tubeless-ready wheels to enjoy the benefits of such a setup.
Not all modern mountain bike rims are tubeless compatible, so if you want to take the tubeless plunge but don't want to invest in new wheels, the Effetto Mariposa Caffelatex Tubeless strip is the answer.Lightweight, puncture resistant transparent rim strip makes tubeless conversion easyFit strip and valves to wheels, add sealant to tubeless or tubeless-ready tyres, inflate and go for a rideLong lasting construction can be moved from wheel to wheelSold as a kit including two rim strips and two 40mm tubeless valvesWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather than investing in a new set of wheels, the Effetto Mariposa Caffelatex Rim Strip allows you to convert your regular inner-tube only wheels to tubeless-ready, so you can enjoy puncture-free riding.When using the Caffelatex Rim Strip, you can remove your current rim tape or cloth and install the strip. This is the first step in setting your wheels and tyres up tubeless. The strip helps to make the rim as air tight as possible. When combined with the tyre sealant, this keeps the tyres inflated and more resistant to punctures. The width of the tape varies, so you must select the right size for your rim. The Small Kit suits rims with an external section of 20-24mm, Medium suits 25-29mm and Large suits 30-34mm wide rims. Once the strip and valves are installed you can install your tubeless or tubeless-ready tyres, add your sealant of choice, inflate the tyres and you're good to go! You can finally kiss punctures goodbye. The strips and valves are incredibly durable, so you can easily swap them between wheels if you need to. Thanks to the Effetto Mariposa Caffelatex Rim Strip, you no longer need to have a set of expensive tubeless or tubeless-ready wheels to enjoy the benefits of such a setup.
Not all modern mountain bike rims are tubeless compatible, so if you want to take the tubeless plunge but don't want to invest in new wheels, the Effetto Mariposa Caffelatex Tubeless strip is the answer.Lightweight, puncture resistant transparent rim strip makes tubeless conversion easyFit strip and valves to wheels, add sealant to tubeless or tubeless-ready tyres, inflate and go for a rideLong lasting construction can be moved from wheel to wheelSold as a kit including two rim strips and two 40mm tubeless valvesWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather than investing in a new set of wheels, the Effetto Mariposa Caffelatex Rim Strip allows you to convert your regular inner-tube only wheels to tubeless-ready, so you can enjoy puncture-free riding.When using the Caffelatex Rim Strip, you can remove your current rim tape or cloth and install the strip. This is the first step in setting your wheels and tyres up tubeless. The strip helps to make the rim as air tight as possible. When combined with the tyre sealant, this keeps the tyres inflated and more resistant to punctures. The width of the tape varies, so you must select the right size for your rim. The Small Kit suits rims with an external section of 20-24mm, Medium suits 25-29mm and Large suits 30-34mm wide rims. Once the strip and valves are installed you can install your tubeless or tubeless-ready tyres, add your sealant of choice, inflate the tyres and you're good to go! You can finally kiss punctures goodbye. The strips and valves are incredibly durable, so you can easily swap them between wheels if you need to. Thanks to the Effetto Mariposa Caffelatex Rim Strip, you no longer need to have a set of expensive tubeless or tubeless-ready wheels to enjoy the benefits of such a setup.