Whether you're fitting new brakes or completely overhauling your brake cabling, this Shimano Dura Ace brake cable set contains everything you need to breathe new life back into your road bike's braking setup. Polymer Coated Stainless Steel Inner Wires Polymer coated stainless steel inner wires leave a smooth surface for low friction and reduced sliding resistance providing a lighter quicker braking operation. Special Spiral Wound Construction for Axial Rigidity The outer casing is lubricated internally along its length with low-friction silicone grease to reduce cable friction and the SLR casing uses a special spiral wound construction that is axially stiff yet can be bent around handlebar curves. The outer casing is also lined with a hard polymer sheath to keep its round shape to assist with the smooth operation of the inner wire. These Shimano Dura Ace brake cables are a great choice of upgrade for replacing your old or worn-out existing cables and enjoying powerful and consistent braking operation on your road bike.
To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Speed-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect. Technologies: XEX: Lightweight, braided steel strands around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-LF: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance. What's Included: (1) 1700mm XEX Shift Housing (2) 2225mm Speed-Lube Liners (2) 2300mm STS-LF Polymer-coated Shift Inner Cables (2) LEX-SD 4mm Shift Housing Segments, 300mm (3) Open Brass End Caps (4) Open Alloy End Caps for 5mm Housing (2) Open Alloy End Caps for 4mm Housing (2) Pro Indexed Inline Adjusters (4mm/5mm) (2) Housing Connectors (4mm/5mm) (2) Non-Crimp Cable Tips (2) Grub Seals (2) 5G Tube Tops (2) Rotating Hooks
With more disc brake systems than ever before, fitting hydraulic hoses can be complex and frustrating. That’s why Jagwire developed the Quick-Fit™ adapter system using proven technology from the motorcycle world. Simply select the Mountain Pro Hydraulic hose you want and match it with the Quick-Fit™ kit for your system. It’s that easy.
The Pro Shift Kit can deliver high performance with thanks to the outer cable’s innovative construction from braided strands that are wrapped around a slick lube liner to ensure a friction-free action. The Pro Shift Kit suits road and mountain bikes and also includes pre-stretched and polished stainless steel inner cables, which will ensure you get the absolute best from your top end components. Contents: 1x 3200mm XEX-SL shift housing 1x 2300mm Pro slick polished stainless front shift inner cable 1x 2800mm Pro slick polished stainless rear shift inner cable 3x sealed alloy end caps 6x lined alloy end caps 2x hooded alloy end caps 2x cable tips 2x 5G tube tops 6x cable donuts 2x rotating hooks Technologies: XEX-SL Outer Cable: This gear outer features lightweight, braided steel strands that around a slick-lube liner and creating a compressionless ring. This provides the accurate cable movement needed for modern drivetrains, with a weight savings of 50% compared to traditional linear strand shift housing. STS-PS Cables: These pre-stretched, slick stainless steel spiral-bound cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes by riders looking for ultimate performance.
This road bike brake cable kit contains all you need to get your Campagnolo brakes working smoothly again.
This Campagnolo Ultrashift gear cable set employs stainless steel inner wires and friction-resistant housings that are lubricated with a special grease, ensuring lightning-fast gear changes and responsive braking control. Laboratory testing has shown that this solution provides unparalleled smoothness. Campagnolo cables maintain a constant friction value of 20-22 N at the most critical point, i.e. when the cable is actuated. A truly incredible value when one considers that some systems produced by other manufacturers exhibit values in the range of 130-140 N. Perfection is only achieved by paying attention to detail of which the Campagnolo cables are but one. All Campagnolo components are part of a unique integrated project. Every component is designed and realized to interact at one with the remaining components. The objective is to provide better-quality performance. On the contrary, precisely because these provide the link between one component and another, the cables must be designed to interface solely with the components they connect.
The SM-BH90 Hose has been specially designed for high-pressure Shimano hydraulic disc brakes with a 90 degree banjo connector. This model has a long banjo and hose made from resin material for years of long-lasting use. Compatible with Shimano XT M8020.
Designed for ease of use, this fantastic set makes cabling incredibly simple. Coming complete with everything you need to install new gears or completely overhaul your existing set-up, this is a perfect kit for fast and effective maintenance.
This trade pack contains 100 cable end crimps, which feature a high-grade alloy construction for maximum strength and durability on your ride. Transfil has also equipped these with a hard anodised finish that gives them additional corrosion resistance for reliable inner wire actuation in all-weather conditions. One final highlight is this pack is available in a range of colour options to choose from, so you can add some extra style to your ride. This makes it a great choice of upgrade for smooth and dependable performance while protecting the end of the inner wire. Manufacturer's Part Numbers: KB63G Gold L 100 pack KB63K Black L 100 pack KB63R Red L 100 pack
Fitting new gears or completely overhauling your gear cabling couldn't be easier, as this Shimano Dura-Ace gear cable kit comes with everything you need in one pack. It includes 1.2mm polymer coated inner wires (1x 2100mm, 1x 1800mm), SP41 outer casing for a complete bike (1x 1700mm) and all the required cable end caps. The polymer coated stainless steel inner cable on this Shimano Dura-Ace gear cable set leaves a smooth surface for low friction and reduced sliding resistance providing a lighter quicker shifting operation. The outer casing is lubricated internally along its length with low-friction silicone grease to reduce cable friction. Also, SP 41 outer casing uses a special directional wound construction process that makes for an axially stiff cable that transmits shifting movements accurately and quickly. Plus, this outer casing is lined with a polymer sheath to assist with the smooth operation of the inner cable.
TRP Bike Brake CablesetIf your bike’s rim or mechanical disc brakes need a performance refresh, this brake cable kit from component specialists TRP is an ideal choice. The high-quality inner cables combine with the compression-resistant outer cable for smooth, consistent operation when you need it most. The kit also comes with all the inner and outer cable finishing parts, so you don’t have to go digging through your toolbox for spares. With this kit installed on your bike, you’ll instantly enjoy more reliable braking.Features: 2x inner cables (one front length, one rear length) 3m outer cable 4x cable ferrules2x cable end caps2x flexible outer cable ends (if running with v brakes)Buy TRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Includes 1.6mm inner wires (1 x 1000mm and 1 x 2050mm), and black 5mm M-System outer casing for a complete bike (1 x 2200mm), and all end caps Sealed end caps with internal O-ring gives an effective seal against the elements, prolonging service life Outer casing is lined with a polymer sheath to assist with the smooth operation of the inner wire