Stainless steel inner brake wire for use with SLR road bike brake system. Suitable for front or rear brakes, just cut to fit.Size: 1.6mm x 2050mm
The Dura-Ace 9000 Road Brake Cable Set includes everything you need for fitting, or completely overhauling your Shimano brakes. Designed to suit the top of the range Dura-Ace series the cable set contains only top quality, high performance components. The inner wire is polymer coated stainless steel which creates a smooth low friction surface with reduced sliding resistance to offer lighter and quicker braking operation. The outer casing is lined with a hard polymer sheath to keep its round shape to assist with the smooth operation of the inner wire, is lubricated internally along its length with low-friction silicone grease to reduce cable friction and uses a special spiral wound construction that is axially stiff, yet can be bent around handlebar curves. The Dura-Ace 900 Road Brake Cable Set has been designed specifically for the high performance of the Dura-Ace range, and is compatible with all Shimano mechanical road brakes.Complete top of the range brake cable set designed to suit Dura-Ace 9000 brakesOuter casing lined with a hard polymer sheathOuter casing lubricated internally along its length with low-friction silicone SLR casing uses a special spiral wound construction 1.6 mm Polymer coated inner wires (1 x 2000 mm, 1 x 1000 mm)SLR outer casing for a complete bike (1 x1800 mm, 1 x 800mm) All end caps
The Shimano Road Brake Cable Set is designed using stainless steel inner wires for increased service life. The stainless-steel inner wires provide smooth braking and higher corrosion resistance. The outer casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.Includes:1.6 mm inner wires (1 x 1000 mm and 1 x2050 mm)5 mm outer casing for a complete bike (1 x 2200 mm)All end caps
The Shimano MTB Gear Cable Set gives you everything you need to replace old gear cables in one handy pack. Complete MTB gear cable set with all you need in one handy packFitting new gears or completely overhauling your gear cabling couldn't be easier - everything you need in one packIncludes 1.2 mm inner wires (1 x 2100 mm, 1 x 1800 mm) and black 4 mm SP41 outer casing for a complete bike (1 x 3000 mm), and sealed outer caps one with added tongue for rubber shield plus inner end capsStainless steel precision ground round inner wire leaves a smooth surface for low friction while providing high corrosion resistanceOuter casing is lubricated internally along its length with low-friction silicone grease to reduce cable frictionSpecial construction process makes for an axially stiff outer casing that transmits shifting movements accurately and quicklyOuter casing is lined with a polymer sheath to assist with the smooth operation of the inner wireThe outer casing is lubricated internally along its length with low-friction silicone grease to reduce cable friction and give you super smooth shifting. The stainless-steel precision ground round inner wire leaves a smooth surface for low friction while providing high corrosion resistance which means it will last longer. The special construction process makes for an axially stiff outer casing that transmits shifting movements accurately and quickly.
Fitting new brakes or giving your cabling a complete overhaul has never been easier than with the Shimano Road Brake Cable set. The die-extruded PTFE coated inner wire leaves a smooth surface for low friction in use, and stainless steel provides smooth shifting and higher corrosion resistance. Includes 1.6 mm PTFE inner wires (1 x 1000 mm and 1 x 2050 mm), and 5 mm outer casing for a complete bike (1 x 800 mm and 1 x 1400 mm), and all end caps. The outer casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.
Shimano steel inner MTB cables for smooth and lasting braking performance. For use with M-System MTB brake cable outer. Suitable for front and rear brakes, just cut to fit.Size: 1.6mm x 2050mm
The Shimano Road/MTB Brake Cable Set provides you with everything you need to replace your brake cables. It includes dual ended inner cable for use on road or mountain bikes and includes outer cable and all end caps. The outer casing is lined with a polymer sheath for a silky-smooth operation.Complete brake cable set for Road / MTB bikesFitting new brakes or completely overhauling your brake cabling couldn't be easier - everything you need in one packUses dual ended inner wire for use on road or MTB applicationsIncludes 1.6 mm inner wires (1 x 1000 mm and 1 x 2050 mm), and black 5 mm M-System outer casing for a complete bike (1 x 2200 mm), and all end capsOuter casing is lined with a polymer sheath to assist with the smooth operation of the inner wire
If you want the gears on your road bike to shift smoothly and remain slick for mile after mile, you need Shimano's Road Gear Cable Set. Using their legendary SP41 outer cables with stainless steel inner wires, this kit has all you need to get your road bike's drivetrain shifting smoothly again.Includes all you need to refresh your road bike's gear cablesStainless steel inner wire is smooth and has high corrosion resistancePre-lubed SP41 outer cable reduces system frictionOuter casing is lined with a polymer sheeth to improve durabilityIncludes 1.2mm inner wires (2 x 2000mm), 4mm black outer casing (2 x 600mm and 1 x 320mm) and all end capsShimano's gear cables have a legendary status, offering smooth, slick shifting that lasts mile after mile. The key to this kit is the way the outer and inner cable work together to reduce friction and improve durability. The outer cable is pre-lubed with a low-friction silicone grease to help the inner cable slide smoothly through the housing, while the inner cable itself has a high level of corrosion resistance to ensure it remains in good shape, even in truly awful conditions. The kit comes with everything you'll need to give your road bike's gear cables a full refresh, including all the end caps. If you want a great value way to breath new life into your bikes drivetrain, the Shimano Road Gear Cable Set should be at the top of your list.
The Shimano SM-CS50 Outer Down Tube Cable Stops for steel frames boasts curved mounting faces for effective outer cable stop and it also allows for normal STI shifters with down tube shifter mounts.
The Shimano XT M800 MTB Gear Cable Set includes everything you need to perform a complete overhaul of your XT M800 Gears. With everything included in one convenient pack, changing your gear cables couldn t be easier. The stainless steel inner wire is electrically coated in OPTISLICK creating a smooth surface for low friction and reduced sliding resistance. The SP41 outer cable features a special directional wound construction, creating an axially stiff cable that transmits shifting movements quickly and accurately. Also featuring a polymer sheath lining and internal low-friction silicone grease lubrication, the SP41 outer casing ensures optimal performance and improved durability. Includes: 1.2mm OPTISLIK inner wires (1 x 2100mm and 1 x 1800mm), SP41 outer casing (1 x 3300mm), all end caps and rubber shields.Optimised for XT M8000 MTB gearsCompatible will all Shimano MTB gearsComplete OPTISLICK gear cable setEverything you need for a complete overhaulSP41 Outer casing lined with a polymer sheath
SLR outer casing for Road Bikes comes with a more solid construction developed to work with the shape of drop handle bars, this more solid casing means it will not be deformed easily at the bends of the bars.With no deforming of the outer casing this assures light action, smoother running and high durability of the inner cables.For use with 1.6 mm brake inner wires. Sold in 1 metre lengths.
The Dura-Ace 9000 Road Gear Cable Set includes everything you need for fitting, or completely overhauling your Shimano gears. Designed to suit the top of the range Dura-Ace series the cable set contains only top quality, high performance components. The inner wire is polymer coated stainless steel which creates a smooth low friction surface with reduced sliding resistance to offer lighter and quicker braking operation. The outer casing is lined with a hard polymer sheath to keep its round shape to assist with the smooth operation of the inner wire, is lubricated internally along its length with low-friction silicone grease to reduce cable friction and uses a special directional wound construction that is axially stiff and transmits shifting movements accurately and quickly. The Dura-Ace 900 Road Gear Cable Set has been designed specifically for the high performance of the Dura-Ace range, and is compatible with all Shimano mechanical road gears.Complete top of the range gear cable set designed to suit Dura-Ace 9000 gearsOuter casing lined with a hard polymer sheathOuter Casing lubricated internally along its length with low-friction silicone SP 41 Outer casing uses a special directional wound construction 1.2mm Polymer coated inner wires (1 x 2100mm, 1 x 1800mm)SLR outer casing for a complete bike (1 x 1700mm) All end caps