Refresh your cables for a smooth, effective braking experience. As your cables corrode and wear, they can become stiff, gritty and less powerful. With a flexible, corrosion resistant 19-strand stainless steel construction, LifeLine Essential cable inners provide a fast, responsive action to help you get the best from your brakes. Tools Needed for InstallationCable cutters & crimps5/6mm Allen keysDepending on your brake configuration, consult your lever and brake manufacturer’s guidelines for correct fitting of cables, tools needed, and required torque settings specific to your particular braking system.
Transfil's bike cable technology benefits from the same research and innovation that has been developed when producing control cables for the French car industry. These specific cables are tailored to provide optimised performance and longevity when used with a tandem bike that's equipped with Shimano drop bar brakes. A total of 19 individual wire strands make up these cables. They are compacted, smoothed and galvanised steel wires to ensure outstanding and consistent performance. Technologies: Transfil cables are composed of an inner core and an outer core. The inner core is composed of one steel thread surrounded by 6 threads making one strand. At this point, a simple strand or multi-strand cable can be produced. The composition of a single strand cable is (1+6) + 12 = 19 threads, and a multi-strand is (1+6) x 7 = 49 threads.
Diversity of pleasures, diversity of uses, diversity of needs. For 50 years, Transfil has created, developed, tested and manufactured brake and gear systems for your bike in conformity with the leading bicycle and component manufactures and for every outdoor use : extreme, road and mountain biking. A cable is composed of an inner core and an outer core. The inner core is composed of one steel thread surrounded by 6 threads making one strand. At this point a simple strand or multi-strand cable can be produced. The composition of a single strand cable is (1+6) + 12 = 19 threads, and a multi-strand is (1+6) x 7 = 49 threads. Lasers have been set in place to increase production as well as to control the diameter on a permanent basis and in case of any anomalies stop the machine. Each laser sends out the information acquired to a central computer unit where statistics and analysis can be retrieved.
Like all LifeLine products, Lifeline Cable Donuts have been developed and tested to meet the highest standards, using the leading factories to give you proven products.
This superb quality cable is perfect as a replacement for your MTB or road bike. Measuring 2500mm in length, this lightweight and strong cable will have your brakes working as they should efficiently.
This durable gear cable is perfect for upgrading or replacing your current cable and measures 2500mm.
To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Slick-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect. Technologies: CSX: High carbon, low compression coiled steel around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-EL: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance. What's Included: (1) 2200mm CSX Brake Housing (1) 1350mm STS-EL Elite Polished Ultra-Slick Front Brake Inner Cable (1) 2000mm STS-EL Elite Polished Ultra-Slick Rear Brake Inner Cable (1) 1275mm Slick-Lube Liner (1) 1925mm Slick-Lube Liner (2) Open Brass End Caps (4) Open Alloy End Caps (2) Cable Tips (2) Grub Seals (2) 5G Tube Tops (2) Rotating Hooks
To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Speed-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect. Technologies: XEX: Lightweight, braided steel strands around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-LF: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance. What's Included: (1) 1700mm XEX Shift Housing (2) 2225mm Speed-Lube Liners (2) 2300mm STS-LF Polymer-coated Shift Inner Cables (2) LEX-SD 4mm Shift Housing Segments, 300mm (3) Open Brass End Caps (4) Open Alloy End Caps for 5mm Housing (2) Open Alloy End Caps for 4mm Housing (2) Pro Indexed Inline Adjusters (4mm/5mm) (2) Housing Connectors (4mm/5mm) (2) Non-Crimp Cable Tips (2) Grub Seals (2) 5G Tube Tops (2) Rotating Hooks
The Jagwire Pro Shift Kit delivers high performance thanks to the outer cable’s innovative construction from braided strands that are wrapped around a slick lube liner to ensure a friction-free action. It also suits road and mountain bikes and also includes pre-stretched and polished stainless steel inner cables, which will ensure you get the absolute best from your top-end components. Contents: 1x 2200mm LEX-SL Shift Housing 1x 2800mm Pro Polished Slick Shift Inner Cable 2x Sealed Alloy End Caps 4x Lined Alloy End Caps 1x Hooded Alloy End Cap 1x Cable Tip 1x 5G Tube Top 3x Cable Donuts 1x Rotating Hook Technologies: XEX-SL Outer Cable: This gear outer features lightweight, braided steel strands that wrap around a slick-lube liner to create a compressionless ring. This provides the accurate cable movement needed for modern drivetrains, with a weight savings of 50% compared to traditional linear strand shift housing. STS-PS Cables: These pre-stretched, slick stainless steel spiral-bound cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes by riders looking for ultimate performance.
This kit includes a dropper-specific 0.8 mm Pro Polished Slick inner cable for seamless use with remote levers, as well as actuator arms to provide efficient cable movement. The Pro Polished Slick cables and Slick-Lube liners provide an enhanced remote lever feel and durable performance, no matter how hard you ride. This Pro Dropper kit is compatible with Shimano cable-actuated dropper seatposts and remotes. Easy to install, this set comes with everything you need to maintain a reliable dropper post experience.
This outer gear casing is guaranteed to provide slick and smooth shifting performance and as the cable is incompressible, its durability outlasts most other brands.
Campagnolo EPS switch-off aluminum valve cap that can store magnets. The EPS switch-off magnet, which is small and easy to lose, can be carried smartly by mounting it inside the cap with a magnet. Please note: This item is for the magnet valve only that slides into the EPS magnet (not included).