The Bullet HT 20 has a light alloy dirt style frame with 20" alloy wheels. With 6 Shimano gears this is a great junior bike, and with suspension forks upfront it's ideal for all terrains and maximum fun! We take care to design a frame that gives good stand over clearance. This can safeguard kids during the formative years when gaining confidence on the bike is important. Approximate age range 6-8 years.
Customise your ride with the ETC Bullet Valve Caps. ETC Bullets Valve Caps Schraeder
So, your Insta360 camera is pretty cool, but do you still want to go cooler than that Well then get yourself an Insta360 Bullet Time Box and get some super swanky swingy shots that no one else has got and blow the minds of your audience as your camera rotates around you.Secure retractable cordLet's you swing overhead shotsSwitch to bullet-time mode and swing!This box features a smooth rotating cord with a standard 1/4" screw that allows you to screw into the Insta360 ONE X2 for a secure mounting of the bullet-time feature. Fully retractable means that you can safely and neatly store your Bullet Time Box in your bag or even pocket if you need it.
Key Features:All New design with an output of 200 lumens,200 lumen Safety Flash Mode with a run time of 15 hours,FL1 Standard IP64 Water Resistant,Daylight Visible with Optimal VIZ,Excellent rear light projection visibility,Low Battery Indicator,High Powered LEDs,USB Rechargeable,Group Ride Mode – Be Seen Without Distracting Fellow Cyclists,Varying steady and safety flash modes.
Nukeproof Dissent 275 Alloy Frame - GreyThis full suspension mountain bike (MTB) frame is well-equipped for fast and intense trail riding, thanks to its high-quality aluminium build that's specifically developed for the most demanding of rides. Designed for maximum strength and durability as you carve your way around the mountain, Nukeproof has also put this model through a hydroforming and triple-butting process. In addition, it is kitted out with a RockShox Super Deluxe Coil Ultimate DH RC rear shock that provides smooth and consistent rear end suspension performance as you charge from trail to trail. Another highlight is its comfortable geometry that includes internal cable routing for a clean, sleek finish.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers.The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all-new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Trail-Ready Full Suspension Alloy MTB FrameThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof's engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, the brand created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of four main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear.Features: Material: Nukeproof Dissent 275 Alloy, hydroformed 6061 triple-butted Aluminium, 200mm travel Use: Mountain Bike (MTB) frame Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (S=300LBS/M=350LBS/L=400LBS /XL=450LBS SPRING) Size Options: S/M/L/XL Fork Travel: 200mm Axle to Crown: 581mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured Standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing Three-stage Dissent linkage Four-position adjustable linkage progression chip system Three-position adjustable chainstay length Enduro bearings Weight: 5.03kgs/11lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 290 Alloy Frame - GreyAll set for charging from trail to trail, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted 6061 aluminium construction that's impressively tough and dependable. Thanks to its 157x12mm Boost rear hub spacing, this model also allows for maximum stiffness and control on the more demanding of terrain conditions. Another highlight is its race-ready geometry that includes internal cable routing for a hassle-free, sleek finish. Coming complete with a RockShox Super Deluxe Coil Ultimate DH RC rear shock, this frame is engineered for smooth and consistent performance, wherever the trail leads you.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers.The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Race Ready Full Suspension MTB FrameThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 190mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x70mm, Bearing End, Red Coil Spring (M=400LBS/L=450LBS /XL=500LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 190mm Wheels Size: 29" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x70mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing Three-stage Dissent linkage 4 position adjustable linkage progression chip system 3 Position adjustable chainstay length Weight: 5.14kgs/11.3lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 290 Alloy Frame - GreyAll set for charging from trail to trail, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted 6061 aluminium construction that's impressively tough and dependable. Thanks to its 157x12mm Boost rear hub spacing, this model also allows for maximum stiffness and control on the more demanding of terrain conditions. Another highlight is its race-ready geometry that includes internal cable routing for a hassle-free, sleek finish. Coming complete with a RockShox Super Deluxe Coil Ultimate DH RC rear shock, this frame is engineered for smooth and consistent performance, wherever the trail leads you.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers.The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Race Ready Full Suspension MTB FrameThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 190mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x70mm, Bearing End, Red Coil Spring (M=400LBS/L=450LBS /XL=500LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 190mm Wheels Size: 29" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x70mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing Three-stage Dissent linkage 4 position adjustable linkage progression chip system 3 Position adjustable chainstay length Weight: 5.14kgs/11.3lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 290 Alloy Frame - GreyAll set for charging from trail to trail, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted 6061 aluminium construction that's impressively tough and dependable. Thanks to its 157x12mm Boost rear hub spacing, this model also allows for maximum stiffness and control on the more demanding of terrain conditions. Another highlight is its race-ready geometry that includes internal cable routing for a hassle-free, sleek finish. Coming complete with a RockShox Super Deluxe Coil Ultimate DH RC rear shock, this frame is engineered for smooth and consistent performance, wherever the trail leads you.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers.The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Race Ready Full Suspension MTB FrameThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 190mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x70mm, Bearing End, Red Coil Spring (M=400LBS/L=450LBS /XL=500LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 190mm Wheels Size: 29" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x70mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing Three-stage Dissent linkage 4 position adjustable linkage progression chip system 3 Position adjustable chainstay length Weight: 5.14kgs/11.3lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 297 Alloy Frame - GreyFeaturing a robust 6061 aluminium build, this full-suspension mountain bike (MTB) frame has been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you attack the trails. Engineered for riders who want to complete their mullet bike setup, this version also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another highlight is its 157x12mm rear hub Boost axle spacing, which delivers stiff and responsive handling on the most demanding of terrain conditions.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Lightweight Full Suspension MTB Frame with 200mm TravelThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Three-stage Dissent linkage Four position adjustable linkage progression chip system Three position adjustable chainstay length Weight: 5.06kgs/11.1lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 297 Alloy Frame - GreyFeaturing a robust 6061 aluminium build, this full-suspension mountain bike (MTB) frame has been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you attack the trails. Engineered for riders who want to complete their mullet bike setup, this version also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another highlight is its 157x12mm rear hub Boost axle spacing, which delivers stiff and responsive handling on the most demanding of terrain conditions.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Lightweight Full Suspension MTB Frame with 200mm TravelThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Three-stage Dissent linkage Four position adjustable linkage progression chip system Three position adjustable chainstay length Weight: 5.06kgs/11.1lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.