The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 5 years,Weight: 324g per pair,Spindle: Forged scm435 chromoly steel,Body: 2 piece machined aluminium,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Bushing,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colours: Orange/Silver or Silver,.You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Key Features: Optimal surface area,Minimal profile 16mm thin,10 adjustable pins per side for grip,Premium bearings & seal system,Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU),Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU),.Specification: Adjustable Pins: 10 Per Side,Body Material: A380 Aluminium,Endcap: T15,Footprint: 100mm X 100mm,Inner Bearing Type: Igus Bearing,Max Rider Weight: No Restriction,Outer Bearing Type: Double Cartridge Bearing,Shoe Size: US 5-10 // EU 37-43,Spindle Material: Forged Scm 415 Chromoly Steel,Warranty: 5 Years,Weight: 439g Per Pair.
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 2 years,Weight: 272g per pair,Spindle: Forged scm435 chromoly steel,Body: one piece composite,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Bushing,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colours: Black, Blue, Red or Neon Green.As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Refresh your crankbrothers stamp 7 or 11 internal components to keep them running box fresh. Includes: Inner bearing o-ring x 2, Spindle seal x 2, Outer Igus solid bearing x 2, Inner Igus solid bearing half x 4, Bearing Retainer Bolt x 4, Outer o-ring x 2, Grease port screw x 2.
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in. Key Features:Moulded traction pins and diamond plate area provide grip and support. ,Excellent mud-shedding: machined pedal body helps further prevent mud clogging. ,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). ,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers and Enduro bearings. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal..Specifications:Weight (per pair): 331g,Spindle: Forged scm 435 chromoly steel,Body: Composite,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Pins: Moulded traction pins,Release angle: 15° or 20°,Warranty: 5 years.
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform.Key Features: Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 435g per pair,Platform: Two piece aluminium + composite,Wings: Investment cast steel,Spring: 300 series stainless steel,Spindle: Forged scm435 chromoly steel,Inner bearing: Needle,Outer bearing: Cartridge,Traction pins: 8mm adjustable.
The world’s most successful downhill / race pedal just got even better! Dual-chamfered edges reduce costly rock strikes, and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders.The ability to set the release angle of the cleats to either 15° to 20° means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike.Key Features:Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 479g per pair,Platform: Extruded/machined aluminium,Wings: cast stainless steel,Spring: 300 series spring stainless steel,Spindle: Forged scm435 chromoly steel,Q-factor: 57mm,Inner bearing: igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails,Outer bearing: enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal,Traction pins: 8mm adjustable,Excellent mud-shedding: using the very open designed pedal platform,Dual chamfered edges to reduce rock strikes,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal,Extremely lightweight: pedal design is very simple with only a few key parts,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle.
Crankbrothers entry price point flat pedal offering the same optimal surface area with small and large pedal platform options.Key Features:Minimal 13mm thickness,9 metal pins per side for grip,Premium bearings and seal system,Stamp small recommended for size 37-43 shoes,Stamp large recommended for size 43-49 shoes,.Technical Specs:Pins - 9 per side mounted from the back,Body Material - Composite,Footprint - 100mm x 100mm small / 111mm x 114mm large,Inner bearing - IGUS LL Glide Bearing,Outer bearing - Enduro cartridge bearing,Spindle - 52mm forged 435 chromoly steel,Warranty - 5 years,Weight - 329g per pair.
The all-new Highline delivers infinite adjustment, smooth feel, and easy installation for any bike.Key Features:Shorter insertion length to fit more bikes,Premium Trelleborg® sealing,Exclusive Igus® LL-glide bearings and keys,Jagwire® cable and housing,Self-contained hydraulic cartridge delivers industry leading quality and reliability,Internal routing ,Quick connect mechanism for ease of cable installation,Linear actuator for quick return speed,2-bolt standard head,Remote sold separately .Specifications:60mm:Material: 7075-T6 aluminium,Max Extended Length: 270mm, 360mm,Max Insertion Length: 270mm Overall: 174mm, 360mm Overall: 264mm,Minimum Stack Height: 47mm,Setback: 0,Total Post Length: 270mm, 360mm,Warranty: 2 years,Weight: 27.2 (270mm overall): 400g, 27.2 (360mm overall): 440g.80mm:Material: 7075-T6 aluminium,Max Extended Length: 100mm,Max Insertion Length: 264mm,Minimum Stack Height: 47mm,Setback: 0,Total Post Length: 380mm,Warranty: 2 years,Weight: 27.2: 460g, 30.9: 550g, 31.6: 560g.100mm:Material: 7075-T6 aluminium,Max Extended Length: 241mm,Max Insertion Length: 220mm,Minimum Stack Height: 47mm,Setback: 0,Total Post Length: 370mm,Warranty: 2 years,Weight: 27.2: 480g, 30.9: 485g, 31.6: 503g, 34.9: 580g.125mm:Material: 7075-T6 aluminium,Max Extended Length: 290mm,Max Insertion Length: 245mm,Minimum Stack Height: 47mm,Setback: 0,Total Post Length: 421mm,Warranty: 2 years,Weight: 27.2: 505g, 30.9: 525g, 31.6: 545g, 34.9: 635g.150mm:Material: 7075-T6 aluminium,Max Extended Length: 337mm,Max Insertion Length: 270mm,Minimum Stack Height: 47mm,Setback: 0,Total Post Length: 469mm,Warranty: 2 years,Weight: 30.9: 565g, 31.6: 587g, 34.9: 685g.170mm:Material: 7075-T6 aluminium,Max Extended Length: 378mm,Max Insertion Length: 285mm,Minimum Stack Height: 47mm,Setback: 0,Total Post Length: 505mm,Warranty: 2 years,Weight: 30.9: 586g, 31.6: 609g, 34.9: 735g.
Widen your Q-factor by 5mm to 57mm. Kit Includes: 2x Long spindles,1x Refresh kit,.Compatible with eggbeater, candy, mallet, 5050, double shot from 2010-present.
Key Features: Optimal surface area,Minimal profile 16mm thin,10 adjustable pins per side for grip,Premium bearings & seal system, Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu),Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu),.Specification: Adjustable Pins: 10 Per Side,Body Material: AM60B Magnesium Alloy,Endcap: T15,Footprint: 114mm x 111mm,Inner Bearing Type: Igus Bearing,Max Rider Weight: No Restriction,Outer Bearing Type: Double Cartridge Bearing, Shoe Size: US 10-15 // EU 43-49,Spindle Material: Forged Scm 415 Chromoly Steel,Warranty: 5 Years,Weight: 386g Per Pair.
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal.The level 11 pedal is the top of the range crankbrothers flat pedal with a slimline, thin, concave profile, adjustable pins for grip and a titanium axle.The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43, and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated.Key Features:Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected.,13mm external and 11mm internal thickness.,Titanium axle.,20 adjustable gold pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges.,Internals run on an igus LL-glide bearing which has been exclusively formulated for crankbrothers and performs in even the most adverse conditions out on the trails.,Small: 100mm x 100mm pedal body footprint,Large: 114mm x 111mm pedal body footprint.Specification:Weight: 299g (Small), 325g (Large),Spindle: Titanium,Body: Forged 6061-T6,Inner bearing: Igus LL-glide bearing,Outer bearing: Igus LL-glide bearing,Body dimensions: 100mm x 100mm (Small), 114mm x 111m (Large),Pins: 10 adjustable pins per side,Warranty: 5 years.