Five Ten Freerider EPS Mid MTB Cycling ShoesWith a mid-height weather protective upper and PrimaLoft® insulation, the Five Ten Freerider EPS Mid MTB Cycling Shoes deliver cosy feet as temperatures plummet and rain clouds burst. Cold. Wet. Muddy. The perfect conditions to have some fun on your mountain bike. And with the Freerider EPS Mid MTB Cycling Shoes, you'll enjoy cosy feet as you shred trails. Weather protection starts via the mid-height PU-coated leather upper. Not only does this give an instantly comfortable fit, but it's also great at shedding mud and water. With fewer seams in the forefoot area, there's greater protection from the wet too, with water much less likely to seep inside. A fully gusseted tongue also prevents ingress of mud and water. As temperatures plunge, the PrimaLoft® insulation comes into its own. It's light in weight and yet incredibly good at sealing in warmth. Deployed from the instep forward and including the tongue, it works with a heat-reflective footbed to keep your feet perfectly cosy. When it comes to pedal grip in all weathers, there are few to match the exceptional planted feel you get from the Stealth® S1 Dotty rubber outsole. The combination of sticky rubber and the famous Dotty™ tread tenaciously grips flat pedals for outstanding bike control and security over rough trails. If you're pushing back uphill to session a trail section, the sole unit will also prove equally grippy. Features:PrimaLoft® insulation from the instep forward, including the tongue, keeping feet warm and dryResistant leather upper: Weather-resistant PU coated upper for abrasion resistance and durabilityReduction of seams and water intake in the forefoot area, keeping feet warm and dryFully gusseted tongue to prevent water and mud intakeStealth® S1 Dotty rubber outsoleClassic Dotty™ tread for superior pedal tractionHeat-reflective footbedBuy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Five Ten Freerider EPS Mid MTB Cycling ShoesWith a mid-height weather protective upper and PrimaLoft® insulation, the Five Ten Freerider EPS Mid MTB Cycling Shoes deliver cosy feet as temperatures plummet and rain clouds burst. Cold. Wet. Muddy. The perfect conditions to have some fun on your mountain bike. And with the Freerider EPS Mid MTB Cycling Shoes, you'll enjoy cosy feet as you shred trails. Weather protection starts via the mid-height PU-coated leather upper. Not only does this give an instantly comfortable fit, but it's also great at shedding mud and water. With fewer seams in the forefoot area, there's greater protection from the wet too, with water much less likely to seep inside. A fully gusseted tongue also prevents ingress of mud and water. As temperatures plunge, the PrimaLoft® insulation comes into its own. It's light in weight and yet incredibly good at sealing in warmth. Deployed from the instep forward and including the tongue, it works with a heat-reflective footbed to keep your feet perfectly cosy. When it comes to pedal grip in all weathers, there are few to match the exceptional planted feel you get from the Stealth® S1 Dotty rubber outsole. The combination of sticky rubber and the famous Dotty™ tread tenaciously grips flat pedals for outstanding bike control and security over rough trails. If you're pushing back uphill to session a trail section, the sole unit will also prove equally grippy. Features:PrimaLoft® insulation from the instep forward, including the tongue, keeping feet warm and dryResistant leather upper: Weather-resistant PU coated upper for abrasion resistance and durabilityReduction of seams and water intake in the forefoot area, keeping feet warm and dryFully gusseted tongue to prevent water and mud intakeStealth® S1 Dotty rubber outsoleClassic Dotty™ tread for superior pedal tractionHeat-reflective footbedBuy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Five Ten Freerider EPS Mid MTB Cycling ShoesWith a mid-height weather protective upper and PrimaLoft® insulation, the Five Ten Freerider EPS Mid MTB Cycling Shoes deliver cosy feet as temperatures plummet and rain clouds burst. Cold. Wet. Muddy. The perfect conditions to have some fun on your mountain bike. And with the Freerider EPS Mid MTB Cycling Shoes, you'll enjoy cosy feet as you shred trails. Weather protection starts via the mid-height PU-coated leather upper. Not only does this give an instantly comfortable fit, but it's also great at shedding mud and water. With fewer seams in the forefoot area, there's greater protection from the wet too, with water much less likely to seep inside. A fully gusseted tongue also prevents ingress of mud and water. As temperatures plunge, the PrimaLoft® insulation comes into its own. It's light in weight and yet incredibly good at sealing in warmth. Deployed from the instep forward and including the tongue, it works with a heat-reflective footbed to keep your feet perfectly cosy. When it comes to pedal grip in all weathers, there are few to match the exceptional planted feel you get from the Stealth® S1 Dotty rubber outsole. The combination of sticky rubber and the famous Dotty™ tread tenaciously grips flat pedals for outstanding bike control and security over rough trails. If you're pushing back uphill to session a trail section, the sole unit will also prove equally grippy. Features:PrimaLoft® insulation from the instep forward, including the tongue, keeping feet warm and dryResistant leather upper: Weather-resistant PU coated upper for abrasion resistance and durabilityReduction of seams and water intake in the forefoot area, keeping feet warm and dryFully gusseted tongue to prevent water and mud intakeStealth® S1 Dotty rubber outsoleClassic Dotty™ tread for superior pedal tractionHeat-reflective footbedBuy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brooks England Challenge Saddle Bag (Large)Made by the classic, old-school, legends of British cycling design, Brooks England, the bag is the next generation in the Challenge range that was designed and patented in 1896. The large version carries triple the volume of the original to allow you to carry plenty of kit. Comes with bearing loops that can be attached to a saddle or to your handlebars for diverse fitting. The bag comes with a vintage style clasp close that circles the bag for the ultimate security for your gear.FeaturesDimensions: 21 x 7 x 11cmCapacity of 1.5 litresMade in EnglandBuy Brooks England Bags from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brooks England Challenge Saddle Bag (Large)Made by the classic, old-school, legends of British cycling design, Brooks England, the bag is the next generation in the Challenge range that was designed and patented in 1896. The large version carries triple the volume of the original to allow you to carry plenty of kit. Comes with bearing loops that can be attached to a saddle or to your handlebars for diverse fitting. The bag comes with a vintage style clasp close that circles the bag for the ultimate security for your gear.FeaturesDimensions: 21 x 7 x 11cmCapacity of 1.5 litresMade in EnglandBuy Brooks England Bags from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brooks England Challenge Saddle Bag (Large)Made by the classic, old-school, legends of British cycling design, Brooks England, the bag is the next generation in the Challenge range that was designed and patented in 1896. The large version carries triple the volume of the original to allow you to carry plenty of kit. Comes with bearing loops that can be attached to a saddle or to your handlebars for diverse fitting. The bag comes with a vintage style clasp close that circles the bag for the ultimate security for your gear.FeaturesDimensions: 21 x 7 x 11cmCapacity of 1.5 litresMade in EnglandBuy Brooks England Bags from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Challenge Large, a new saddle bag for fitment to the rear of a saddle bearing bag loops or over the handlebars. It features buckles located within the hold itself to ensure greater security while the strap that closes the unit encircles the bag’s contents prevents them from rattling during transit.
Mallet 2 PedalsSpecsbody material6061-T6 aluminumcleatsPremium brass cleats with shims includedendcapSlottedinner bearing typeIgus LL-glide bearingmax rider weightNo restrictionouter bearing typeEnduro cartridge bearingq-factor52mmrelease angle15° / 20°spindle materialForged scm 435 chromoly steelspring material300 series stainless steelwarranty5 yearsweight508g per pairwing materialStamped steel
Want a lightweight, flexible shoe you can ride in all day? Us, too. That's why Nike built the Nike SB Bruin React. It's a durable low-top with springy, responsive Nike React foam—all in a skate-right design. ###shogun-image-section###
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.