The Stamp flat shoe does it all, whether on street or trail. The outsole is optimized for Crankbrothers Stamp pedal body, though it is designed to work flawlessly with any flat pedal. Its high-friction rubber compound provides optimal grip and its lug depth absorbs the pins to ensure a secure pedal connection. Key Features: Outsole MC2 high-friction compound for grip and durability,Stamp tread pattern optimized for contact surfaceand compatibility,Directional angled & spaced toe / heel lugsfor traction while hiking,Ramped toe for walkability,Cushioned EVA midsole for shock absorption,. Upper Round laces for smooth closure, Lace pocket for safety and style,Ventilated windows with perforated mesh material for breathability,Padded tongue for protection,TPU reinforced areas for protection and abrasion resistance,Heel dots for grip and superior heel hold,Hidden eyelets for durability and clean design.
The Crankbrothers Mallet E clip-in shoe excels for enduro races or all-day adventures. Featuring a carbon-injected nylon shank, the Mallet E shoe offers pedaling efficiency without compromising on shoe-to-pedal interface. Our innovative Match System optimizes engagement for any MTB clip-in system, whether that’s Crankbrothers or SPD. It comes with Match shim and Crankbrothers cleat pre-installed in a neutral position so they are ready to ride with Crankbrothers pedals right out of the box. Key Features: Outsole Match Box optimized for any MTB pedals,Ramp for easy clip-in / out and mud clearance,Pre-installed Match Shim for Crankbrothers pedals,Pre-installed cleat for Crankbrothers pedals,MC1 mid-friction compound for easy exit,Directional angled & spaced toe / heel lugs for traction while hiking,Ramped toe for walkability,Stiff shank for power transfer,Cushioned EVA midsole for shock absorption,. Upper BOA® Fit System & strap for micro-adjustment,Ventilated windows with perforated mesh material for breathability,Padded tongue for protection,TPU reinforced areas for protection and abrasion resistance,Heel dots for grip and superior heel hold,Hidden eyelets for durability and clean design.
Coloured range of replacement shoe laces for Mallet, Mallet E or Stamp laced up shoes.Small/Medium - 115cm (recommended for size 4-8)Large/X-Large - 125cm (recommended for size 8.5-13)
The Stamp flat shoe does it all, whether on street or trail. The outsole is optimized for Crankbrothers Stamp pedal body, though it is designed to work flawlessly with any flat pedal. Its high-friction rubber compound provides optimal grip and its lug depth absorbs the pins to ensure a secure pedal connection.The BOA® Fit System utilizes an L6 micro-adjustment dial, a strong lightweight lace and low-friction lace guides to deliver fast, effortless, precision fit.Our flat rubber compound (MC2) is optimized for grip and durability. It has high-friction to stick to the pedal body and low rebound properties to damp vibrations. The lugs are rounded to resist abrasion.The tread pattern is designed for traction off the bike. Directionally angled and spaced toe and heel lugs offer traction for hiking up or down steep terrain. The ramped toe provides walkability on steep terrain. Key Features: Outsole MC2 high-friction compound for grip and durability,Stamp tread pattern optimized for contact surfaceand compatibility,Directional angled & spaced toe / heel lugsfor traction while hiking,Ramped toe for walkability,Cushioned EVA midsole for shock absorption,. Upper BOA® Fit System & strap for micro-adjustment,Ventilated windows with perforated mesh material for breathability,Padded tongue for protection,TPU reinforced areas for protection and abrasion resistance,Heel dots for grip and superior heel hold,Hidden eyelets for durability and clean design.
Crank Brothers Premium Cleats are made of a premium brass for a longer life in adverse conditions, and lateral adjustment for pinpoint cleat location on the shoe.Key Features:Weight - 30g per pair,Float - 6 degree,Material - premium strength brass,Release angle - 15 degree or 20 degree,Compatibility - eggbeater, candy, smarty, mallet, acid,Shoes - mountain,Bolt pattern - 2-hole,Adjustment - 2.2mm left/right,Shims - included.
The highline remote features a unique spherical adjustment, with near-infinite rotation and tilt customisation options, for perfect cockpit ergonomics.Key Features:Pivot remote lever allows optimal ergonomic placement,Ergonomic spherical adjustment - 360 degree rotation / 22 degree tilt,Single bolt hinge locking system,Universal mounting system: top / bottom / left / right.
Ultra-durable brass cleats for crankbrother pedals.Key Features:Premium strength brass,Release angle: 10 degrees,Bolt pattern: 2 bolt,Adjustment: 2.2mm left/right,Shims included.
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal.The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel.The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43, and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated.Key Features:Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness.,20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges.,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.,Small: 100mm x 100mm pedal body footprint,Large: 114mm x 111mm pedal body footprint,Available in red or black.Specification:Weight: 345g (Small), 375g (Large),Spindle: Forged scm 435 chromoly steel,Body: Forged 6061-T6,Inner bearing: Igus LL-glide bearing,Outer bearing: Igus LL-glide bearing,Body dimensions: 100mm x 100mm (Small), 114mm x 111m (Large),Pins: 10 adjustable pins per side,Warranty: 5 years.
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1, 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes.There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Key Features:Excellent mud-shedding: the design is very open.,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Chamfered edges help reduce rock strikes,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..Specifications:Weight (per pair): 320g,Spindle: Forged scm 435 chromoly steel,Body: 6061-T6 aluminium,Wings: 17-4PH stainless,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Release angle: 15° or 20°,Warranty: 5 years.
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 5 years,Weight: 304g per pair,Spindle: Forged scm435 chromoly steel,Body: 2 piece machined aluminium,Wings: Cast Steel,Spring: 300 series stainless steel,Inner bearing: Needle,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colour options: Black/Silver, Blue/Silver or Red/Silver,.You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in.Moulded traction pins and diamond plate area provide grip and support. Key Features:Excellent mud-shedding: machined pedal body helps further prevent mud clogging.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal..
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform.Key Features:Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 428g per pair,Platform: Two piece aluminium + composite,Wings: Stamped steel,Spring: 300 series stainless steel,Spindle: Forged scm435 chromoly steel,Inner bearing: Bushing,Outer bearing: Cartridge,Traction pins: 8mm adjustable.