The Gear Up OakRak Floor-to-Ceiling 2 / 4 Bike Rack is a good-looking floor-to-ceiling bike rack that carries two bikes as standard and makes an ideal, neat and stylish storage solution for your bikes.Can be upgraded to carry four bikes; extra bikes kits are availableConstructed from beautiful furniture grade American red Oak from sustainable sources, with a hand-rubbed oil stain finish to show off the grain of the woodMinimum ceiling height required is 7 feet / 2.13 metres, and the maximum is 10 feet / 3 metres; assembled width is 14.5 inches / 37 cm, and depth 9.5 inches 24 cmVinyl coated arms hold and protect your bike, and are adjusted independently to fit many shapes and sizes of frameVelcro straps provided to stabilise the front wheel of your bikeHeld in place with a tension mounting system, with a maximum recommended weight of 200 lbs / 90 kgAll assembly hardware is included, and some simple DIY is requiredIt s constructed from beautiful furniture grade American red Oak from sustainable sources, with a hand-rubbed oil stain finish to show off the grain of the wood. Vinyl coated arms hold and protect your bike and are adjusted independently to fit many shapes and sizes of frame. Velcro straps provided to stabilise the front wheel of your bike. Its held in place with a tension mounting system, with a maximum recommended weight of 200 lbs / 90 kg.
The Crank Brothers Gem Pump features a stunning, laser etched aluminium body. A reversible head switches between Presta and Schrader valves easily and quickly. Inflating the tyres won't take long, with large dual piston allowing 2 effortless modes, 1-40 psi high volume and 40-100psi high pressure, so no matter whether you're running a 700x25c road tyre or a 29x2.6 MTB tyre, you'll be back up to pressure in no time! At just 176mm long and weighing only 131g, the Gem is easy enough to carry on the go in a jersey pocket, saddle bag, hip pack or hydration pack!
The Double Shot is the latest addition to Crank Brothers huge range of class-leading pedals. Unsure whether to clip in or stick flats The Double Shot has got you covered. Taking Crank Brothers Egg Beater design and basically cutting it in half, you have the awesome signature crank brothers mud shedding clip mechanism on one side and a large flat platform pedal on the other side. Ideal for beginners or those just looking for a versatile shoe for all conditions, the Double Shot is a worthy addition to the Crank Brothers range.A380 Aluminium bodyStainless steel springs/wingsForged chromoly steel axle15/20 Degree release angle52mm Q factorIgus LL-Glide & Enduro cartridge bearingsPremium brass cleats with shims included395g per pair5 Year warranty
The Double Shot is the latest addition to Crank Brothers huge range of class-leading pedals. Unsure whether to clip in or stick flats The Double Shot has got you covered. Taking Crank Brothers Egg Beater design and basically cutting it in half, you have the awesome signature crank brothers mud shedding clip mechanism on one side and a large flat platform pedal on the other side. Ideal for beginners or those just looking for a versatile shoe for all conditions, the Double Shot is a worthy addition to the Crank Brothers range.A380 Aluminium bodyStainless steel springs/wingsForged chromoly steel axle15/20 Degree release angle52mm Q factorIgus LL-Glide & Enduro cartridge bearingsPremium brass cleats with shims included395g per pair5 Year warranty
The world's most successful downhill race pedal just got even better! Dual-chamfered edges reduce costly rock strikes, and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two-piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders.Release angle: 15° To 20°Cleat: Premium brass cleats includedWarranty: 5 yearsWeight: 479g per pairPlatform: Extruded/machined aluminiumWings: Cast stainless steelSpring: 300 Series spring stainless steelSpindle: Forged Scm435 Chromoly steelQ-Factor: 57mmInner bearing: Igus Ll-Glide bearingOuter bearing: Enduro cartridge bearingDouble seal system
The world's most successful downhill race pedal just got even better! Dual-chamfered edges reduce costly rock strikes, and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two-piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders.Release angle: 15° To 20°Cleat: Premium brass cleats includedWarranty: 5 yearsWeight: 479g per pairPlatform: Extruded/machined aluminiumWings: Cast stainless steelSpring: 300 Series spring stainless steelSpindle: Forged Scm435 Chromoly steelQ-Factor: 57mmInner bearing: Igus Ll-Glide bearingOuter bearing: Enduro cartridge bearingDouble seal system
The Crank Brothers Candy 1 Pedals are an iconic pedal designed by Carl and Frank, the original founders of Crank Brothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated .It started with a simple question: what is the best way to attach a shoe to a crank To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. Cleat: Premium brass cleats includedShims: IncludedRelease Angle: 15° to 20°Warranty: 2 yearsWeight: 272g per pairSpindle: Forged scm435 chromoly steelBody: one piece compositeWings: Stamped steelSpring: 300 series stainless steelInner bearing: BushingOuter bearing: CartridgeMaximum rider weight: No restrictionsColours: Black, Blue, Red or Neon GreenThe Candy 1 is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4-point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. As with the rest of the Crank Brothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Choose to ride flat or clipped in. The new double shot 1 is Crank Brothers hybrid pedal designed half flat / half clip-in. Excellent mud shedding for when you re shredding. Moulded traction pins and diamond plate area provide grip and supportExcellent mud-shedding: machined pedal body helps further prevent mud cloggingFit adjustment: Crank Brothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these)Internals run on igus LL-glide bearing which has been exclusively formulated for Crank Brothers and Enduro bearings. It performs in even the most adverse conditions out on the trails.Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.Weight (per pair): 331g Spindle: Forged scm 435 chromoly steel Body: Composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Cleats: premium brass cleats included Pins: Moulded traction pins Release angle: 15° or 20° Warranty: 5 years
Crank Brothers new Stamp 7 pedal takes their individual style and forms it perfectly into a thin, crisply designed flat pedal that is uniquely available in two sizes, depending on which size shoe you shred in. Lightweight and tough forged aluminium body with 10 grippy pins per side & forged chromoly steel axleIgus LL-Glide and Enduro cartridge bearings are extremely durable5 Year warranty gives you piece of mindLightweight at just 345g per pair (small size)Small suitable for 37-43 EU shoes (100x100mm Platform)Large Suitable for 43-49 EU shoes (114x111mm Platform)With a super low profile 13mm thin platform and 10 pins per side, the Stamp 7 provides an optimal interface between shoe and pedal, helping to drop your centre of gravity while also offering improved clearance in rocky terrain. Featuring Crank Brothers latest Igus/Enduro bearings and forged Chromoly steel axle, these pedals are built to laugh in the face of adverse weather conditions and are backed up with Crank Brothers 5 Year Warranty. Lightweight, durable and with killer looks and superb quality, the Crank Brothers Stamp 7 is perfect for riders who want the ultimate thin flat pedal!
Crank Brothers new Stamp 7 pedal takes their individual style and forms it perfectly into a thin, crisply designed flat pedal that is uniquely available in two sizes, depending on which size shoe you shred in. Lightweight and tough forged aluminium body with 10 grippy pins per side & forged chromoly steel axleIgus LL-Glide and Enduro cartridge bearings are extremely durable5 Year warranty gives you piece of mindLightweight at just 345g per pair (small size)Small suitable for 37-43 EU shoes (100x100mm Platform)Large Suitable for 43-49 EU shoes (114x111mm Platform)With a super low profile 13mm thin platform and 10 pins per side, the Stamp 7 provides an optimal interface between shoe and pedal, helping to drop your centre of gravity while also offering improved clearance in rocky terrain. Featuring Crank Brothers latest Igus/Enduro bearings and forged Chromoly steel axle, these pedals are built to laugh in the face of adverse weather conditions and are backed up with Crank Brothers 5 Year Warranty. Lightweight, durable and with killer looks and superb quality, the Crank Brothers Stamp 7 is perfect for riders who want the ultimate thin flat pedal!
Crank Brothers new Stamp 7 pedal takes their individual style and forms it perfectly into a thin, crisply designed flat pedal that is uniquely available in two sizes, depending on which size shoe you shred in. Lightweight and tough forged aluminium body with 10 grippy pins per side & forged chromoly steel axleIgus LL-Glide and Enduro cartridge bearings are extremely durable5 Year warranty gives you piece of mindLightweight at just 345g per pair (small size)Small suitable for 37-43 EU shoes (100x100mm Platform)Large Suitable for 43-49 EU shoes (114x111mm Platform)With a super low profile 13mm thin platform and 10 pins per side, the Stamp 7 provides an optimal interface between shoe and pedal, helping to drop your centre of gravity while also offering improved clearance in rocky terrain. Featuring Crank Brothers latest Igus/Enduro bearings and forged Chromoly steel axle, these pedals are built to laugh in the face of adverse weather conditions and are backed up with Crank Brothers 5 Year Warranty. Lightweight, durable and with killer looks and superb quality, the Crank Brothers Stamp 7 is perfect for riders who want the ultimate thin flat pedal!
The all-new Highline delivers infinite adjustment, smooth feel, and easy installation for any bike. It has a shorter insertion length so that it can fit more bikes, premium Trelleborg sealing to keep the post working perfectly for longer further helped by Igus LL-glide bearings and keys. The self-contained IFP hydraulic cartridge delivers industry leading quality and reliability.Shorter insertion length to fit more bikesPremium Trelleborg sealingExclusive Igus LL-glide bearings and keysJagwire cable and housingSelf-contained IFP hydraulic cartridgeInternal routingQuick connect mechanism for ease of cable installationLinear actuator for quick return speed2-bolt quick-connect headRemote sold separatelySpecs 100mmMaterial: 7075-T6 aluminiumMax extended length: 237mmMax insertion length: 217mmMinimum stack height: 47mmSetback: 0Total post length: 367mmWarranty: 4 yearsWeight: 30.9: 475g / 31.6: 490gSpecs 125mmMaterial: 7075-T6 aluminiumMax extended length: 286mmMax insertion length: 242mmMinimum stack height: 47mmSetback: 0Total post length: 417mmWarranty: 4 yearsWeight: 30.9: 515g / 31.6: 532gSpecs 150mmMaterial: 7075-T6 aluminiumMax extended length: 336mmMax insertion length: 268mmMinimum stack height: 47mmSetback: 0Total post length: 467mmWarranty: 4 yearsWeight: 30.9: 551g / 31.6: 572gSpecs 170mmMaterial: 7075-T6 aluminumMax extended length: 377mmMax insertion length: 287mmMinimum stack height: 47mmSetback: 0Total post length: 507mmWarranty: 4 yearsWeight: 30.9: 583g / 31.6: 604g