Introducing the Brand-X Ascend Dropper Seatpost shifter style lever kit. The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL6061-T6Bar mounted shifter style remote leverCable Length: 1.5mWeight: 40.7g (excluding cable)Adjustment: +10 degrees angle range and +7mm horizontal adjustmentFinish: Sand blasted and hard anodised blackWarranty: 2 Year
Brand-X Ascend Lever Kit V2 - (1 x Gears) This ergonomic shifter style dropper remote lever is designed to be positioned where your front shifter would normally sit. This means it's perfectly suited for riders who are using a 1x chain ring set up, without a front derailleur. This superb lever kit is compatible with all the Brand-X Ascend dropper seatposts and other cable actuated posts for a smooth and effortless operation.Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. To top it off, the cables can be installed at either end, so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post.Features: Material: 6061-T6 AluminiumFinish: Sand blasted and hard anodised black Diameter: 22.2mm Cable Length 1.5m Cable Housing: 1500mm (inner cable 1710mm) Bar mounted shifter style remote lever Weight: 40.7g (excluding the cable 64g)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X's Ascend CX Paddle Lever Kit includes the paddle lever, cable outer, cable inner, guide pipe with barrel adjust, cable end cap and cable barrel for post fitment. This kit allows the easy replacement of the ergonomic paddle lever. Key Features: Material: T651-7075 Aluminium,To Fit: 31.8mm handlebar diameter,Bar mounted paddle style remote lever,Linkage mechanism eliminates any outer cable pull,Cable operated,Cable Length: 1.5m,Finish: Sand blasted and hard anodised.
Brand-X LightSKIN Seatpost Light (USB Charge)Light it up with the Brand-X Lightskin USB charge seatpost. The post features a sleek, innovative, integrated 5 LED rear light. Ditch with the traditional and ride in style with the Brand-X Lightskin seatpost. Featuring USB charge at the head of the post.Brand-X has partnered with South Korean lighting specialist LightSKIN to offer you a seatpost with a difference.Switch the light on and change modes with one short press of the 1st LED. Press and hold the LED to switch the light off. The post has 3 light modes and kicks out 25 Lumens offering eye-catching visibility as the nights draw in.Offering 10 hours battery life in continuous light mode and 50 hours in pulse mode, the Brand-X LightSKIN Seatpost is a workhorse and a minimalist's dream. The post comes with a 2 metre micro usb charge cable allowing you to charge from home with the bike parked up. The charging port is located at the head of the post and is protected with a rubber capIdeal for commuters and for those of us that that forget our lights or fear them being stolen.Features: AL6061 Aluminium Available in 31.6 and 27.2 seatpost diameters USB Rechargeable Post length is 350mm 4 Modes: Flash, Strobe, Chase and Continuous Dual bolt seat rail clamp 25 Lumen output Weight: Weight: 369g (27.2), 384g (31.6)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Introducing the Brand-X Ascend Dropper Seatpost shifter style lever kit. The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL6061-T6Shimano I-Spec mount shifter style remote leverCable Length: 1.5mWeight: 40.7g (excluding cable)Adjustment: +10 degrees angle range and +7mm horizontal adjustmentFinish: Sand blasted and hard anodised blackWarranty: 2 Year
Brandon Begin's signature GFE plastic pegs use a 4140 steel core to keep the size down and allow for thicker stronger plastic outer. Each peg sleeve has a steel washer molded in to keep your peg in place. Available in 4.75 and 4.25. 14mm with spacer. Please note: The Merritt Brandon Begin GFE Peg is sold individually. ###section### Product Specs LENGTH: 4.25" (108mm) DIAMETER: 36mm MATERIAL: Plastic AXLE SIZE: 14mm with 3/8" adaptor PACK SIZE: 1 (Single) WEIGHT: 175g (6.2oz)
Brand-X FS-01 Frame Dropout Kit1x Left and Right Dropout Kit including gear hanger for the Brand-X FS-01 Full Suspension FrameFeatures: Includes Left and Right Dropout and fixing bolts Will fit the 27.5” and 29” framesBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X LightSKIN SeatpostRide with confidence and never fear forgetting your rear bike light again with the Brand-X LightSKIN seatpost. This seatpost has its own incorporated rear light with 5 LEDs embodied into the seatpost. The first LED acts as a switch and mode setter, making it easy to use.Clear viability guaranteed with 25 lumens brightness and three light modes, you are sure to be seen on your bike as the nights draw in. LightSKIN has 50 hours of continuous light battery life and 100 hours in flashing mode. Batteries are connected at the bottom of the seatpost with the saddle attachable with a single bolt seat rail clamp.This award winning seatpost and light combination is completely unique and ideal for commuters.Features:Material: AL6061 AluminiumAvailable in 31.6 and 27.2 seatpost diametersAvailable in Black and SilverTakes 2 x Alkaline AA Batteries (not included)Post length is 350mm3 Modes: Flash, Strobe, ContinuousSingle bolt seat rail clamp25 Lumen outputWeight: 392g (27.2), 426g (31.6) (inc. batteries)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X have partnered with South Korean lighting specialist LightSKIN to offer you a seatpost with a difference. Switch the light on and change modes with one short press of the 1st LED. Press and hold the LED to switch the light off. The post has 3 light modes and kicks out 25 Lumens offering eyecatching visibility as the nights draw in. Offering 50 hours battery life in continuous light mode and 100 hours in flashing the Brand-X LightSKIN Seatpost is a workhorse and a minimilists dream. Lightskin have geniune credibility in this area and won the Prestigious Red Dot design award with this very product. Install the batteries at the base of the post, attach your saddle with the single bolt seat rail clamp and ride in style. Ideal for commuters and for those of us that that forget our lights or fear them being stolen.
Brand-X Trail Wheelset HG Freehub This freehub is specifically designed for use on the Brand-X Trail rear wheel. It comes complete with pawls, a spring and a bearing for straightforward installation. Genuine Brand-X spare part.How to replace the Freehub 1. Pull off hub end cap2. Pull off freehub3. Push on new freehub turning anti-clockwise4. Refit end capFeatures: Type: Complete freehub Compatibility: Brand-X Trail rear wheel Pawl: 3-pawl Includes: Pawls, spring and bearingBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The G-1 Outrigger Goggles come supplied with an Anti-scratch and anti-fog clear lens. Additional lenses are available via the lens packs sold seperately. The frames are constructed from a durable TPU and finished in a matte black. The nose guard is removeable. The frames have an outrigger either side to bring the straps outside the helmet for when riding with a full face helmet.. A three layer soft touch foam seals snug and comfortably around your face. Graphics on the strap is 3D woven and a discreet black on black 'bx'. Anti slip silicone backing on the strap ensure the goggles stay firmly in place. The goggles are supplied with a 'bx' branded cloth bag and packed in a recyclable carboard box. The goggles are manufactured in the same factory as market leading brands and we believe we can provide you a set of goggles that are comparable in quality to far more expensive models without the fuss that goes with big name brands. Ride smart with BX goggles. *Note we've puposely not included pinlock tearoff pins as we try keep the trails clean.
Brand-X G-1 Outrigger GogglesThe Brand-X G-1 Outrigger Goggles bring uncompromised performance at an incredible price. We've packed in as many features as possible to bring you an excellent set of goggles that'll keep your vision clear and your eyes protected.The G-1 Outrigger Goggles come supplied with an Anti-scratch and anti-fog clear lens. Additional lenses are available via the lens packs sold separately.The frames are constructed from a durable TPU and finished in a matte black. The nose guard is removeable. The frames have an outrigger either side to bring the straps outside the helmet for when riding with a full face helmet..A three-layer soft touch foam seals snug and comfortably around your face.Graphics on the strap is 3D woven and a discreet black on black 'bx'. Anti-slip silicone backing on the strap ensure the goggles stay firmly in place.The goggles are supplied with a 'bx' branded cloth bag and packed in a recyclable carboard box.The goggles are manufactured in the same factory as market leading brands and we believe we can provide you a set of goggles that are comparable in quality to far more expensive models without the fuss that goes with big name brands.Ride smart with BX goggles.*Note we've purposely not included pinlock tearoff pins as we try keep the trails clean.FeaturesMatte Black TPU Outrigger FrameAnti-scratch and anti-fog clear lensRemovable Nose guardThree-layer soft touch FoamAnti-Slip Silicone Backing on the Straps'bx' Branded Cloth BagReplacement and tinted lenses available separatelyRecyclable packagingWeight: 140gBuy Brand-X Goggles from Chain Reaction Cycles, the World's Largest Online Bike Store.