SRAM Level Mountain Bike Disc Brake and RotorSRAM's Level MTB Disc Brake + Rotor may fall into the more budget range of brakes, but it still manages to pack a punch, as it features most of the same technologies as their higher end Downhill/Enduro "Guide" brakes. Ideal for Cross-Country and trail use, it benefits from technology such as an expandable bladder and TPC Plus. Features: Body Material: Aluminium Lever Material: Aluminium - Stamped Caliper Design: 2-piston monoblock caliper Recommended Rotor type: 1-piece G2 CleanSweep Pad: Steel-backed organic Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: Contact Point Adjust, Piggyback Reservoir, DOT 5.1 fluid Technology Highlight(s): TPC Plus, DirectLink Pad/Holder: Top-loading Intended Use: XC/Trail Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Stainless Hardware: Yes Weight: 430gTechnologies:DirectLinkSRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.PiggyBack Reservoir:The brake fluid reservoir on SRAM’s latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement-so you can switch your levers on the handlebar and run them moto style without hassle.Expandable Bladder SRAM’s new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. TPC Plus (Timing Port Closure):A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port to pressurise the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.DOT 5.1Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Level Mountain Bike Disc Brake and RotorSRAM's Level MTB Disc Brake + Rotor may fall into the more budget range of brakes, but it still manages to pack a punch, as it features most of the same technologies as their higher end Downhill/Enduro "Guide" brakes. Ideal for Cross-Country and trail use, it benefits from technology such as an expandable bladder and TPC Plus. Features: Body Material: Aluminium Lever Material: Aluminium - Stamped Caliper Design: 2-piston monoblock caliper Recommended Rotor type: 1-piece G2 CleanSweep Pad: Steel-backed organic Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: Contact Point Adjust, Piggyback Reservoir, DOT 5.1 fluid Technology Highlight(s): TPC Plus, DirectLink Pad/Holder: Top-loading Intended Use: XC/Trail Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Stainless Hardware: Yes Weight: 430gTechnologies:DirectLinkSRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.PiggyBack Reservoir:The brake fluid reservoir on SRAM’s latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement-so you can switch your levers on the handlebar and run them moto style without hassle.Expandable Bladder SRAM’s new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. TPC Plus (Timing Port Closure):A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port to pressurise the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.DOT 5.1Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ideal for Cross-Country and trail use, it benefits from technology such as an expandable bladder and TPC Plus™. Technology Highlight(s): TPC™ Plus, DirectLink™ Pad/Holder: Top-loading Intended Use: XC/Trail Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Stainless Hardware: Yes Technologies: DirectLink™: SRAM’s DirectLink™ lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. PiggyBack™ Reservoir: The brake fluid reservoir on SRAM’s latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement-so you can switch your levers on the handlebar and run them moto style without hassle. Expandable Bladder: SRAM’s new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. TPC Plus™ (Timing Port Closure): A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port to pressurise the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. DOT 5.1™: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.
This stunning model is available as a spare part for use with MT Trail Carbon, MT8, MT7 and MT6 disc brakes since 2015. Additionally, it is a perfect choice of a replacement for your old or worn-out existing model for fast and smooth braking performance.
Magura HC3 1-Finger MTB Brake Lever BladeThis brilliant brake lever is perfectly suited for fast-paced road cycling as it offers phenomenal braking performance and control. It features a sturdy aluminium construction which makes it more than capable of handling all the abuse that comes with a long day in the saddle. Coming complete with a tooled adjustable reach, this fantastic version allows you to easily set it up to suit your hand-size, riding style and the terrain conditions. Features: Material: Aluminium Use: Road Adjustment: Tooled reach adjust Compatibility: MT Trail Carbon, MT8, MT7 and MT6 disc brakes since 2015 Lever Size: 1-finger Part Number: 2701251 Weight: 38g (approx)Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:The racers' choice, 105 brake callipers come in a compact and lightweight design for high performance,Low profile aerodynamic direct mount Super SLR-EV Dual-Pivot design provides superior brake performance and light action,Can be used on frames with seat stay direct mounts,Enhanced brake arch proportions give a quicker linear response and increased power,Low profile outer cable stop position improves cable routing for reduced friction,Cartridge brake shoes for easy replacement,Convex washers on the brake shoes offer toe-in brake adjustment and easy alignment,Lightweight aluminium construction, with an anodised finish to preserve the good looks,Compatible with 28c tyres,49mm drop.
Whether you're spending the day on your favourite local trail routes or enjoying a weekend-long epic mountain adventure, this hydraulic disc brake is engineered for smooth and consistent braking performance. It features a high-quality aluminium lever, which provides optimum comfort and performance as you apply pressure. Shimano has also kitted out this trail-ready model with an adjustable lever reach, which allows you to easily fine-tune the gap between the lever blade and your handlebar. As a result, you'll benefit from a more rider-tuned braking feel that can be set up to match your riding style for perfect custom fit. High Power Four Piston Disc Brake Caliper This disc brake's caliper features consistent braking performance and reliable stopping power in all conditions. The four-piston caliper instils greater downhill confidence thanks to its opposed design, which reduces the leading effect while its optimal pad wear increases braking control. This makes it powerful and consistent as you conquer your way from trail to trail at speed. Item Top Features Continued: Adjustment: Reach adjustment Centrelock Compatible: Yes 6-bolt Compatible: Conventional 6-bolt rotors can be used all in a choice of 160mm, 180mm and 203mm Adaptors/Rotors Included: No (available separately) Hose Included: Yes Pads Included: Yes, Resin pads included Technologies: Centrelock Compatible: Can be used with the revolutionary Center Lock rotor system which fits easily to Center Lock compatible hubs; alternatively conventional 6-bolt rotors can be used all in a choice of 160mm, 180mm and 203mm. Opposed 4-Piston Design: Opposed 4-piston design reduces leading effect and optimal pad wear increases braking control. Two-piece Caliper: Two piece calliper design is both ridged and durable. Ergonomic Alloy Brake Lever: Provides optimum comfort and performance. Mineral Oil: Mineral oil brake fluid is non-corrosive and less hazardous than conventional hydraulic brake fluid. Shim-less Mounting System: Shim-less mounting system allows for quick installation and setting up. Reach Adjust: Brake lever features reach adjustment for perfect custom fit.
The Mechanical Advantage Is YoursWith gobs of beautifully modulated power and intuitive easy-to-use adjustability, the BB7s set the standard in the realm of mechanical disc brakes. Inboard and outboard adjustor knobs, Tri-Align Caliper Positioning System, and integrated Cable Stop spring tension adjustment ensures that our standard is everyone else’s goal.Tech Spec : Weight : 329 grams (160mm rotor; front post mount),Caliper Design : Mechanical, Forged 2-piece Aluminum,Finish : Graphite Grey,Rotor : G2 CleanSweep, 160/180/200mm,Pad : Sintered,Adjustment : Dual Knob Pad Adjustment, Tri-Align Caliper Positioning,Intended Use : XC/TRAIL/AM/FR/DH.Technologies : Tri-Align™ Caliper Positioning System™Another original Avid technology making your life better—there’s never been an easier brake to install and adjust. With Avid’s Tri-Align™Caliper Positioning System™, aligning the caliper to the rotor literally takes seconds. Just loosen the CPS™ bolts a little, and then squeeze the brake lever while re-tightening the bolts. Perfect caliper alignment—just like that.
Shimano MT401 Disc BrakeTailored for mountain bike (MTB) riding, the Shimano MT401 Disc Brake features a sleek design that uses a two-finger lever and a two-piston caliper to deliver quick and intuitive hydraulic braking performance. This MTB hydraulic disc brake includes a BL-MT401 Shimano hydraulic disc brake lever and a BR-MT400 Shimano two-piston hydraulic disc brake caliper.BL-MT401 Shimano Hydraulic Disc Brake LeverAll set for hitting your local trails, this MTB disc brake comes equipped with a durable alloy brake lever for fantastic strength as you navigate across the mountain. Shimano has also kitted out this model with an anodised finish for extra protection against corrosion during wetter riding conditions. Another highlight is its accessible lever reach that's designed for small hands and can easily be adjusted (minimum reach 75mm). This makes it easy to pull and control using its two-finger sized lever blade. Coming complete with a funnel bleeding design with Shimano hydraulic mineral oil compatibility, this is a great choice for long-lasting braking performance as well as easy, quick and clean installation.MTB Disc Brake with Reach AdjustThis model's brake lever is equipped with a reach adjust mechanism. The distance from handlebar grip to lever can be adjusted to suit any hand size, type of riding and individual rider preferences.BR-MT400 Shimano Two-Piston Hydraulic Disc Brake CaliperThe Shimano MT400 hydraulic disc brake caliper delivers long-lasting performance and quick, easy installation and adjustment. It features a post mount type and uses its two-piston design to provide balanced braking power that's specially tailored for MTB riding.Features: Brake Lever Material: Alloy with Anodised finish Brake Type: Hydraulic disc brake Use: Mountain Bike (MTB) Brake Pads Included: Yes Brake Rotor Included: No, available separately Brake Lever Size: Two finger Minimum Reach: 75mm Funnel Bleeding: Yes Oil: Shimano Mineral Oil Tooled Reach Adjust: Yes; Hose Joint: Straight Caliper Included: BR-MT400, 2-piston, post-mount, One Way Bleeding Single or Pair: Single Manufacturer's Part Numbers: Black 1300mm Rear-RH: MT4012KGRURX130; Black 1650mm Rear-RH: MT4012KGRURX165A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ideal for all-mountain and enduro riding, used along with one of Hope’s powerful and adjustable levers, this caliper will help you to enjoy super fine descending control and awesome stopping power.
Whether you're giving your braking setup a refresh or simply replacing old or damaged parts, this Hayes replacement lever is ideal for swapping out the original one on your Dominion A2 or A4 disc brake. Sold individually, this lever is a genuine Hayes replacement part. Manufacturer's Part Number: 98-36117-K002
The SRAM Level Hydraulic Disk Brake levels the playing field with power and reliability stuffed into a lightweight package. This is a no-nonsense performer, but don t let its understated disposition fool you Level gives you the art of braking in minimalist form.Stamped aluminium lever construction2-Piston caliper designSteel-backed organic padStainless steel hardwareG2 clean sweep 160mm rotorDOT 5.1 fluidTooled reach adjustmentPiggyBack reservoirDirectLink / Expandable bladder / Timing port closure technologiesHose lengths: Front 950mm / Rear - 1800mmApprox. Weight: 430g (Direct Mount, 800mm Hose, 160mm CL Rotor)Please Note: Bracket not included