Ready for the most aggressive mountain bike trails, this bottom bracket features a machined alloy construction. This makes it capable of handling all the abuse associated with all-day epics on your MTB. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an additional layer of protection against corrosion. This enables you to benefit from its superb strength as you shred in the trails in all-weather conditions. Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. MTB Bottom Bracket with Titanium Coated Bearings All set for fast-paced mountain bike rides, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, this MTB bottom bracket is a perfect choice of upgrade for riders who want a reliable component on tough mountain bike trails. Please note: 16 notch 49mm OD BB tool required for fitting. Nukeproof Technical Manual BSA 30mm Manufacturer Part Numbers: Black: NUKBB392BSA-TSBB Blue: NUKBB392BSA-TSBBBLU Copper: NUKBB392BSA-TSBBCOP Grey: NUKBB392BSA-TSBBGRY Purple: NUKBB392BSA-TSBBPUR Red: NUKBB392BSA-TSBBRED
There aren’t many times a replacement part actually improves your bike but put one on your bike and you’ll wonder why you didn’t install a NINJA sooner. The bearings are housed in an alloy shell and wrapped with plastic and fibre. This fusion of the three materials provides the bearings a solid platform to sit on and extends their lives. A lot of people would be satisfied with this, but they went even further by extending the alloy shell so the right and left sides lock together. This locks the frame, cranks and bottom bracket together and provides unparalleled stiffness.
This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
It is a side-specific tool and makes fitting press fit bottom brackets including the PF41 a breeze.
Fits all years and models of Daytona, Racing Triple, Centaur, Veloce and Mirage crank sets. Also fits 1993 and later Athena and pre-1995 Record and Chorus cranks. Will NOT fit older Campagnolo Nuovo or Super Record road cranks which require a 115 mm spindle with a 5 mm drive side offset. All newer Campy bottom brackets are symmetrical and lack any drive side offset.
Hope PF41 Bottom Bracket Installation ToolA very useful and simple to use tool that’s ideal for professional or home mechanics, Hope has designed its PF41 Bottom Bracket Installation Tool to work with both pressfit PF41 and PF46 bottom brackets. It ensures you’ll always complete a quick and accurate job, so you can be sure expensive parts are installed correctly for smooth operation.Features: Material: CNC Machined Aluminium Compatibility: Pressfit PF41 and PF46 bottom brackets High quality Machined surfaces to fit securely in each frame or bottom bracket Genuine Hope part Manufacturer's Part Number: HTTPFABuy Hope Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
FSA MegaEvo Bottom Bracket (Evo8681-Di2)MegaEvo is a threaded bottom bracket that allows the installation of a BB386EVO crankset into a standard 68mm BB shell with BSA threading.Features: Titanium anodized aluminum cups For road products - carbon/alloy 386EVO cranks Stainless steel bearing Shimano Di2 wiring compatible Sizes: English threading - 68mm width (BC-1.37in x 24T) Weight: 87.4gBuy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Token Ninja BB86/89.5/92 Bottom BracketThis superb bottom bracket is specifically designed for use with BB86/89.5/92 frames. Its high-quality bearings are housed in an alloy shell and wrapped with plastic and fibre for extra durability. Additionally, this fusion of three materials provides the bearings with a solid platform to rest on while extending their longevity. To top it off, the extension of its alloy shell locks your frame, cranks and bottom bracket together and provides you with unparalleled stiffness.Features:Material: Shell: Alloy, Plastic and Fibre Compatibility: BB86/89.5/92 Spindle: Shimano 24mm Extended shell which locks you frame, cranks and bottom bracket together Ultra-stiffBuy Token Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Token Ninja BB30 frame Shimano Bottom BracketThis versatile bottom bracket is specifically designed for bikes with a BB30 frame standard and cranksets which feature a Shimano 24mm spindle. Its bearings are housed in an immensely tough alloy shell which is also wrapped in plastic and fibre for unrivalled stiffness and strength. This fusion of three materials provides the bearings with a solid platform to rest on while also extending their longevity. Rock-Solid Bottom BracketEngineered for precision, Token has gone the extra distance with this version by extending its shell, so the right and left sides lock together. This locks your frame, crankset and bottom bracket in place for unparalleled durability and control with every rotation. Features: Material: Alloy, Plastic and Fibre Use: Road, MTB Frame Compatibility: BB30 Crankset Compatibility: Shimano 24mmBuy Token Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Token Ninja PF30 Shimano Bottom BracketThis superb bottom bracket is specifically designed for use with PF30 frames. Its high-quality bearings are housed in an alloy shell and wrapped with plastic and fibre for extra durability. Additionally, this fusion of three materials provides the bearings with a solid platform to rest on while extending their longevity. One final highlight is the extension of its alloy shell locks your frame, cranks and bottom bracket together and provides you with unparalleled stiffness.Features: Shell Material: Alloy, Plastic and Fibre Use: MTB, Road Size: Shimano 24mm, PF30 Buy Token Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Token Ninja Cannondale BB30A Bottom BracketThis solid bottom bracket is developed especially for use with your Cannondale frame with a BB30A fitment. it features an alloy shell which is wrapped in plastic and fibre for excellent strength and extended longevity. Furthermore, its right and left sides lock together, so your frame, cranks and bottom bracket become one and you'll benefit from unparalleled stiffness. This is the ultimate choice of upgrade for riders who want a tougher and more reliable component which doesn't creak. Features: Shell Material: Alloy, Plastic and Fibre Frame Compatibility: Cannondale Bottom Bracket Compatibility: BB30A Crank Compatibility: Shimano 24mmBuy Token Components from Chain Reaction Cycles, the World's Largest Online Bike Store.