These custom, Swiss made bearings are double sealed, fully serviceable and removable which give a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle without using shims or spacers -again increasing life and reliability. Hope use a non-contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. Standard 6 colours are available on cups - red, blue, silver, black, gold and gunmetal, with the centre tubes being black on the stainless and gunsmoke on the ceramic. Please Note: The 68/73mm width option is the universal type for both MTB and Road bikes, it is not the Hope Road Specific Series model. For the Road Specific model, choose the "Stainless Steel Road" option. Tech Tip: the 68/73mm width option is the most commonly used size for threaded road and mountain bike bottom bracket shells. The wider 83mm width is mainly seen on "downhill" (ie. long travel) mountain bikes. Please confirm the width of your bike frame's bottom bracket shell before ordering.
Engineered to be simple to install, this fantastic set is compatible with DUB cranksets and Hope 30mm bottom brackets. This allows for a straightforward conversion, so you can spend less time in the workshop and more time enjoying the ride.
Features: External bottom bracket designed for threaded bottom brackets Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Free running labyrinth seal protects bearings and has less drag
It is a side-specific tool and makes fitting press fit bottom brackets including the PF41 a breeze.
Hope PF41 Bottom Bracket Installation ToolA very useful and simple to use tool that’s ideal for professional or home mechanics, Hope has designed its PF41 Bottom Bracket Installation Tool to work with both pressfit PF41 and PF46 bottom brackets. It ensures you’ll always complete a quick and accurate job, so you can be sure expensive parts are installed correctly for smooth operation.Features: Material: CNC Machined Aluminium Compatibility: Pressfit PF41 and PF46 bottom brackets High quality Machined surfaces to fit securely in each frame or bottom bracket Genuine Hope part Manufacturer's Part Number: HTTPFABuy Hope Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope 30mm Bottom Bracket Install SpannerThis top-quality spanner is specifically engineered for use with Hope 30mm bottom bracket cups. Perfect for keeping in your workshop, this dependable component allows you to easily install and remove your Hope bottom bracket cups with a 30mm axle. Precision made just like the company's premium quality components and bike parts, this solid tool offers hassle-free maintenance and won't let you down. Features: Use: Road, MTB Bottom Bracket Compatibility: Hope 30mm BB Part Number: HTT188Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF41 Press Fit Stainless Bottom BracketDesigned and manufactured in the UK, this Hope Press Fit bottom bracket has stainless steel bearings and suits BB92 and BB89 bottom bracket shells. It's compatible with any crank with a 24mm axle, such as Shimano Hollowtech II chainsets and SRAM GXP (with separately sold adaptors). It can also easily be serviced with replaceable sealed bearings and external labyrinth seals.Features: Type: Press Fit Bearings: Stainless Steel Axle Compatible: 24mm Cup Diameter Measurements: 41mm external, 24mm internal Bearing cups thread into a centre tube to give a very secure, safe fit Easy to service and replaceable parts Specific fitting tool required - purchased separatelyManufacturer Reference Number: BBPF41SSN Weight: 112g (approx) Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Threaded 30mm MTB Bottom BracketHope’s threaded external bottom bracket is made from machined aluminium and kitted out with sealed cartridge bearings. This 30mm version is designed for use with chainsets with the larger 30mm spindle size, for more efficient power transfer. Suitable for all bike types, this smooth spinning component has advanced labyrinth seals to prevent water and dirt getting inside and to increase its durability.Features: Type: English Thread external type Bearings: Stainless Steel cartridge bearings BB Shell: BSA Thread BB Shell Frame Width Compatibility: 68mm, 73mm, 83mm, 100mm and 120mm Crank Spindle/Axle Diameter: 30mm Compatibility: All cranks with 30mm axles External bottom bracket designed for threaded bottom brackets Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Free running labyrinth seal protects bearings and has less drag Cartridge bearings are replaceable Please Note: Specific fitting tool (HTT188) needed to fit bottom bracket (sold separately) Manufacturer Reference Number: BBSS30N Weight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit SRAM Bottom Bracket (30mm)Compatible with all of SRAM’s chainsets that have 30mm spindle diameters, Hope’s fully sealed pressfit bottom bracket brings you smooth and durable operation. Rather than simply being pressed into place, this bottom bracket comes with a threaded central sleeve, which prevents any slippage or play. Durable steel cartridge bearings ensure that the smooth and unrestricted rotation lasts ride after ride.Features: Material: Cups: CNC Machined Aluminium; Bearings: SteelBearings: Steel sealed cartridge bearingsSuits BB Shell size: 46mm x 68 or 73mmCup Diameter: 46mmCrank Spindle Diameter: 30mmManufacturer Reference Code: BBPF467330SSNSPF46 bottom brackets are designed to fit bikes with a 46mm threadless bottom bracket shellThe bearing cups thread into a centre tube to give a very secure, safe fitCups pressed in and held in place by a screw-in centre tube to prevent slipping and playAlso compatible with other brands of chainsets with 30mm spindlesSpecific fitting tool required (sold separately)Easy to service and replaceable partsWeight: 112g (approx.)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.