MegaEvo is a threaded BB that allows a 386Evo crank on a standard frame with BSA shellKey Features:Black anodized Alu cups,For road carbon 386Evo crank,Steel bearing,89g.
Praxis M30 Press Fit bottom brackets are designed to be a proper bottom bracket (BB) for installing Turn M30 spindle based cranks in either; • BB30, • PF30, • BB86, • BB92 • Specialized’s OSBB frames. Our patent pending design keeps the cartridge bearings outboard of the frame right on Shimano™ spec for greater rigidity and free of frame/c-clip tolerance issues that other systems deal with.Simply press in the longer non-drive-cup, then the shorter drive cup threads into it. As the drive cup threads in, our trademark Collet system expands to a precise limit evenly dispersing pressure for a super tight fit. With both cups connected and our collet set exactly to spec, there is no chance the bearings can come out of alignment or wiggle/walk out of the frame. This design also uses a compressible o-ring on the non-drive side cup to compensate for frame shell width discrepancies.
Featuring serviceable, double lip sealed Enduro bearings, This bottom bracket is made with a USA machined aluminium shell for superior function and durability. Fits race frames with a BB86 Bottom bracket shell and cranks with a 24mm spindle.
Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker™ compatible brake set gives all the power of its siblings, keeping you in complete control.Specifications:Weight: 410g (direct mount, 800mm hose, 160mm CL rotor).Lever Material: Stamped aluminum.Caliper Design: 2-piston caliper.Finish: Gloss Black.Rotor: CenterLine.Pad: Steel-backed organic.Fluid: DOT 5.1.Adjustment: Tooled reach adjust.Technology Highlight: DirectLink™, Expandable Bladder, Timing Port Closure.Material: Aluminum.Pad / Holder: Top loading.Intended Use: XC, Trail.System: Open system.Rotor Sizes: 140 (rear), 160, 170, 180, 200mm.Tri-Align Caliper Positioning System: No.Speed Dial: No.Bend Zone™: Yes.Ambidextrous: Yes.Stainless Hardware: Steel.
Adapts the BB86 bottom bracket to fit FSA 386 Evo cranksets.
A high security U-lock that's perfect for bicycles eBikes and powersports. Features: 13mm hardened max-performance steel shackle resists bolt cutters and leverage attacks Patent-pending hardened double deadbolt design gives additional protection against twist attacks New sliding dustcover New double deadbolt design Higher security disc-style cylinder is pick and drill resistant Includes Flexframe-U bracket providing convenient multi-location U-lock transport 120cm x 10mm Kryptoflex double looped cable to secure your front wheel or accessories 3 stainless steel keys — including new key design and one led replaceable key fob Protective vinyl coating Key safe program Product dimensions: 8.3cm x 17.8cm Product weight: 1.61 kgs
These custom, Swiss made bearings are double sealed, fully serviceable and removable which give a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle without using shims or spacers -again increasing life and reliability. Hope use a non-contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. Standard 6 colours are available on cups - red, blue, silver, black, gold and gunmetal, with the centre tubes being black on the stainless and gunsmoke on the ceramic. Please Note: The 68/73mm width option is the universal type for both MTB and Road bikes, it is not the Hope Road Specific Series model. For the Road Specific model, choose the "Stainless Steel Road" option. Tech Tip: the 68/73mm width option is the most commonly used size for threaded road and mountain bike bottom bracket shells. The wider 83mm width is mainly seen on "downhill" (ie. long travel) mountain bikes. Please confirm the width of your bike frame's bottom bracket shell before ordering.
The Campag Crank & Bearing Tool Set CBP-8 comes equipped with everything you need to get to work on your specialised cranks and bearings, taking them off and putting them back firmly and safely to keep your pedalling in peak condition. The set features a Power Torque compatible crank puller, crank removal extension plug and crank bearing removal adaptor as well as a bearing puller and setter which will also work with Ultra-Torque systems. Completing the set are protective pads and adaptors for use with both carbon and aluminium cranks, making it just the job for an often arduous task.
"High quality press fit 41mm bottom bracket bearing solution for 30mm crank axles."Key Features30mm axle compatable,High quality stainless bearings,designed to fit Press fit 41mm threadless bottom bracket shells,Suitable for road, mtb and fatbikes.Press Fit 41 30mm bottom bracket Tech Specs Fits 89.5, 92, 104.5, 107 and 121mm bottom bracket widths,Designed to suit cranks with a 30mm axle in a Press Fit 41mm bottom bracket shell,**NOTE**30mm PF41 bottom bracket does not use a threaded centre tube,Weight 77g.
E Thirteen BSA Threaded Bottom BracketComing equipped with a strong aluminium construction, this bottom bracket is tough and durable as you clock up the miles on your road bike or explore countryside backroads on your gravel bike. Compatible with 30mm spindle cranks and frames with BSA 68mm threaded bottom bracket shells, this model includes a bottom bracket, spacers, sticker and user manual for straightforward installation. Thanks to its sealed bearings, it provides long-lasting performance with extra protection, making it a dependable choice of upgrade for road or gravel riding disciplines. Features: Material: Aluminium Use: Road, Gravel Compatibility: BSA Size: 68mm Spindle Size: 30mm Bearings: Sealed Included: Bottom bracket, bottom bracket spacers, sticker, and user manual Custom bearings, high-performance seals Weight: 94gManufacturer's Part Number: E13BB2002 Black 68mm 30mmBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This PF41 bottom bracket features high-quality stainless steel sealed cartridge bearings for reliable performance, whatever your riding discipline. Normally, with bike frames with 41mm pressfit bottom bracket shells, you can only run cranksets with a 24mm spindle, now you can upgrade to the crankset you want, rather than the only one that will fit. The smooth running fully sealed also ensure your drivetrain will keep running smoothly and in all riding conditions. Manufacturer's Part Number: BBPF4130SS
Hope PF41 Press Fit 30mm Bottom BracketHope brings you its PF41 bottom bracket bearings which are ready for 30mm spindles. Normally, with bike frames with 41mm pressfit bottom bracket shells, you can only run cranksets with a 24mm spindle, now you can upgrade to the crankset you want, rather than the only one that will fit. The smooth running fully sealed also ensure your drivetrain will keep running smoothly and in all riding conditions.Features: Type: BB86/92 Crankset Axle Compatibility: 30mm Bottom Bracket Compatibility: 41x89.5, 92, 104.5, 107 and 121mm High-quality stainless steel sealed cartridge bearings Suitable for Road, Mountain Bike (MTB) and Fatbikes PF bottom brackets are designed to fit bikes with a threadless bottom bracket cup Ability to convert the bottom bracket to fit SRAM DUB cranks with a simple shim adaptor (sold separately) Specific fitting tool required (sold separately) Weight: 77gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.