Introducing the Brand-X Ascend Dropper Seatpost shifter style lever kit. The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL6061-T6Shimano I-Spec mount shifter style remote leverCable Length: 1.5mWeight: 40.7g (excluding cable)Adjustment: +10 degrees angle range and +7mm horizontal adjustmentFinish: Sand blasted and hard anodised blackWarranty: 2 Year
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can be engaged/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Unlike the standard bolt-thru axle, this version has an easy to use solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can be engaged/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
The Ascend II XL externally routed dropper seatpost offers 170mm of travel. Ideal for taller riders or for those who like the added height adjustment, the Ascend II XL is available in both 30.9 and 31.6 seatpost diameters.AL6061-T6 AluminiumBar mounted remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero Offset one-piece head/ upper shaft with micro adjust clamping mechanismDiameter: 30.9mm or 31.6mmLength: 489mm (shaft is 264mm), Travel: 170mmCable Length: 1.5mFinish: Sand Blasted and Hard Anodised Black2 Year WarrantyWeight: 670g (31.6mm without cable/lever)Building on the success of the original Ascend, Brand- X now offer a long drop externally routed option with the Ascend II XL. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing.The post comes with an ergonomic 1X lever. The cable is actuated from the mid cap ensuring zero cable movement. For those wishing to run a 2X set up, a right-hand mount 'paddle' lever is available. The Ascend Dropper seatpost set new standards for reliability and performance at a fantastic price point.
The Brand-X Knurled Lock on Handlebars Grips are a no nonsense, solid, comfortable grip that will keep you out on the trails and keep your hands firmly where they need to be.Closed end construction with subtle in-mould 'BX' logoDouble densityAvailable in 6 coloursA25 Compound135mm x 28.5mm100% Recyclable PackagingWeight: 85g (Pair)Constructed in 2 layers, combining the firmness of hard plastic PP with the softness of an A25 Vexk rubber, the grips offer great comfort and durability. The knurled finish maintains grip in the wet and dry with closed ends there's no need to worry about bar end plugs. The one-piece construction incorporates a plastic clamp and alloy fittings to securely mount the grips.
The Brand-X Mushroom Lock on Handlebars Grips are a no nonsense, solid, comfy grip that will keep you out on the trails and keep your hands firmly where they need to be. The ribbed mushroom design provides added comfort and helps reduce arm pump.Closed end construction with subtle in-mould 'BX' logoDouble densityRibbed Mushroom Pattern to improve comfort and reduce arm pumpAvailable in 2 coloursA25 Compound135mm x 28.5mmWeight: 85g (Pair)100% Recyclable PackagingConstructed in 2 layers, combining the firmness of hard plastic PP with the softness of an A25 Vexk rubber, the grips offer suitable comfort and durability. The mushroom ribs contour to your hand and with closed ends there's no need to worry about bar end plugs. The one-piece construction incorporates a plastic clamp and alloy fittings to securely mount the grips.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
The Brand-X Front Boost Conversion Kit allows for a 15x100mm hub to be converted to 15x110mm Boost spacing. This conversion kit includes two axle spacers, a 6-bolt rotor spacer and rotor bolts for straightforward installation. Designed to work with most 15mm non-Boost hubs, it is also recommended to check with your specific hub manufacturer for full compatibility. This kit is specifically developed to allow a 15x100mm hub to be converted to 15x110mm Boost spacing. Genuine Brand-X spare parts.Compatibility: Most 15mm non-Boost hubsIncludes: 2 x Axle spacers, 6-bolt rotor spacer and rotor boltsConversion: 15x100mm to 15x110mm
The Brand-X Rear Boost Conversion Kit allows for a 142x12mm hub to be converted to 148x12mm Boost spacing. This conversion kit includes two axle spacers, a 6-bolt rotor spacer and rotor bolts for straightforward installation. Designed to work with most 142mm non-Boost hubs, it is also recommended to check with your specific hub manufacturer for full compatibility. This kit is specifically developed to allow a 142x12mm hub to be converted to 148x12mm Boost spacing. Genuine Brand-X spare parts.Compatibility: Most 142mm non-Boost hubsIncludes: 2 x Axle spacers, 6-bolt rotor spacer and rotor boltsConversion: 142x12mm to 148x12mm
The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL7075-T651Bar mounted shifter style remote leverCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised black
The Brand-X Half Waffle Lock on Handlebars Grips are a no nonsense, solid, comfy grip that will keep you out on the trails and keep your hands firmly where they need to be.Closed end construction with subtle in-mould 'BX' logoDouble densityHalf waffle and half knurled finish for extra gripAvailable in 6 coloursA20 Compound135mm x 28.5mmWeight: 85g (Pair)100% Recyclable PackagingConstructed in 2 layers, combining the firmness of hard plastic PP with the softness of an A20 Vexk rubber, the grips offer suitable comfort and durability. The half waffle contours to your hand and with closed ends there's no need to worry about bar end plugs. The one-piece construction incorporates a plastic clamp and alloy fittings to securely mount the grips.