A precision CNC-machined aluminium tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM® BSA DUB®, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage.
The Campag Crank & Bearing Tool Set CBP-8 comes equipped with everything you need to get to work on your specialised cranks and bearings, taking them off and putting them back firmly and safely to keep your pedalling in peak condition. The set features a Power Torque compatible crank puller, crank removal extension plug and crank bearing removal adaptor as well as a bearing puller and setter which will also work with Ultra-Torque systems. Completing the set are protective pads and adaptors for use with both carbon and aluminium cranks, making it just the job for an often arduous task.
This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell.
Perfect for facing any thru-axle dropout setup and width, IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 accurately faces front and rear disc mounts to maintain and improve your braking quality. With telescopic axle adaptors for easy and adaptable use, and including a pair of IS Mount, post and Flat Mount cutters within its robust and convenient carry-case, this is a great bit of kit for any workshop or garage.
The unique, wedge-shaped Park Tool Brake Piston Press slides into a hydraulic disc brake caliper to pre-set the piston when replacing pads, aligning pads, and performing other service procedures. Makes hydraulic disc brake maintenance and repair faster and easier.
Park Tool Brake Rotor Truing Fork DT-2A very useful addition to any busy home or professional bike mechanic’s toolbox, the DT-2 disc brake rotor truing tool benefits from Park Tool’s renowned quality and durability. This easy to use bike tool prevents oily fingerprints from getting on the braking surface and it's two slot sizes to give you the ability to make minor edge adjustments or more major repairs.Features: Material: Laser cut from high-quality Stainless Steel Specially designed and precisely manufactured to gently adjust bent or damaged brake rotors Features two different slot depths Centre of handle is vinyl dipped for comfort Dimensions: 25.4 x 10.16 x 2.54cm Manufacturer's Part Number: QKDT2C Weight: 199.5g (approx)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket/Cassette Tool BBT-5/FR-11Specially created by Park Tool to suit Campagnolo’s bottom brackets and cassette lockrings, the BBT-5/FR-11 bike tool is an essential workshop addition. Made from tool-specific alloy steel, it’s made for repeated use and its large nut-style base makes it easy to use with wrenches or your vice, enabling you to get the grip you need to remove stubborn components. Plus, despite its high strength, Park Tool gave it thin-walled sides, so you can easily remove cassettes without the need to disassemble the hubs axle.Features: Material: Heat Treated Alloy Tool Steel Fits all Campagnolo cassette lockrings Also fits Campagnolo Record, Chorus, Centaur, and Athena bottom brackets The outside diameter of the BBT-5/FR-11 is 22.8mm and has 12 splines Always use a skewer or axle nut to hold the tool firmly in place during removal and installation Centre bore for axle or spindle clearance is 16mmBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Tool (BBT-29)If you’re a busy shop or home mechanic that’s regularly working on bike drivetrains, the BBT-29 Bottom Bracket Tool is an ideal addition to your kit. Easy to use and bringing you plenty of leverage, Park Tool has given it two 16-notch cut-outs. One of the sizes suits cups with a 39mm outer diameter such as Shimano types and one has a 48.5mm size to suit FSA MegaEvo models.Features: Removes bottom brackets with 16-notch bearing cups Suitable for 39mm bottom bracket cups such as Shimano Dura-Ace 9000 series and XTR 980 series Suitable for 48.5mm (e.g. FSA MegaEvo).Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Caliper Brake Wrench - CBWThese small, nickel plated wrenches can be used on brakes, derailleurs, etc. CBW wrenches are nominally 1/8" (3.2mm) thick.Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Disc Brake Mount Facing Set (DT-5.2) Designed for accurate facing of front and rear disc mounts, the Park Tool Disc Brake Mount Facing Set DT-5.2 is a precision tool system that helps to eliminate poor brake performance, noisy braking and premature wear of parts caused by misaligned disc brake mounts.Robust and VersatileSuitable for facing IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 works with any open or thru-axle dropout setup and width thanks to its telescopic axle adaptors. Complete with a pair of IS Mount and Post and Flat Mount cutters and a solid, compact storage case, the Park Tool Disc Brake Mount Facing Set DT-5.2 is just the job for any workshop or service area.Features: Compatible Mounts: Any IS Mount, Post Mounts, Flat Mounts, Low-Clearance Chainstay Mounts Compatible Axles: Open, Thru-Axle (including Boost 110, Boost 148 and all fat bike axles) Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.