A variant of the external bottom bracket, PressFit cut weight by up to 40 grams and give easier installation by allowing you to press the bearing cups into the frame instead of threading them. There's no change to the crank spindle length and diameter remain the same.PressFit cut weight by up to 40 grams and provide easier installation by allowing you to press the bearing cups into the frame instead of threading them.Theres no change to the crank spindle length and diameter are standard GXP (Red, Force, Rival, Apex)Compatibility: Truvativ GXP Cranksets.Weight 84g Caramic 94g standard..
Bottomless Tokens allow riders to easily custom tune their RockShox fork’s air-spring performance to best match their own riding style and suspension preference. Adding the easy-to-install Bottomless Tokens changes the air-spring curve to resist bottom-out after a big hit, giving aggressive riders the power to attack the trail harder. Removing Bottomless Tokens makes the air-spring curve more linear, enhancing suspension feel for certain types of terrain or trail condition and ensuring riders who are less front-end aggressive benefit from 100 percent of their fork’s travel.Key Features:Black bottomless tokens are compatible with the following Solo Air forks: RS-1, SID, Reba, Bluto, Revelation..Grey bottomless tokens are compatible with the following Solo Air forks: Pike, Lyrik, Yari, Pike DJ, BoXXer..Dark red bottomless tokens are compatible with the following Dual Position Air forks: Pike, Lyrik, Yari..
Three, sealed cartridge style, bearings; two on the chainring side and one on the non-drive side.Weighs just 220 grams; only 30 grams more than Record.17 mm cro-moly steel, 102 mm hollow spindle fits 8, 9 and 10 speed Campy Record and Chorus cranks from 1995 to present.Unique taper is not interchangeable with Shimano.Removable cups are machined from 7000 series aluminum alloy and are easily replaceable.Comes with British (1.37 inches x 24 threads per inch) or larger diameter, Italian cups (36 mm x 24 threads per inch). Spindles are identical and always 102 mm long..
Three sealed cartridge style bearings; two on the chain ring side and one on the non-drive side.Fits all years and models of Daytona, Racing Triple, Centaur, Veloce and Mirage crank sets. Also fits 1993 and later Athena and pre-1995 Record and Chorus cranks.Will NOT fit older Campagnolo Nuovo or Super Record road cranks which require a 115 mm spindle with a 5 mm drive side offset. All newer Campy bottom brackets are symmetrical and lack any drive side offset.Comes in two threading configurations with spindle lengths of 111 or 115 mm. Weights listed below are for 111 mm spindles.Alloy cups and bearings are similar to Chorus and Record. The hollow cro-moly spindle is similar to the ACH bottom bracket spindle. 233 grams.Unique taper is not interchangeable with Shimano.Cups are machined from 7000 series aluminum alloy.Comes with British (1.37 inches x 24 threads per inch) or larger diameter, Italian cups (36 mm x 24 threads per inch). 16 mm, heat treated cro-moly, spindles are hollow and available in 111 or 115 mm lengths..
Head tube reaming & facing cutter for Cane Creek 1.1/8" IS compatible integrated headset system. Bottom.
Key Features:The #752 is used to ream BB30 bottom bracket shells to an ID of 41.94 mm.,Must be used with the HTR-1 Head Tube Reaming and Facing Set with a QK750 Centring Cone Adaptor,
Features:The BBT-29 is a double-ended bottom bracket wrench designed to fit non-standard diameter 16-notch external bottom bracket bearing cups.One end fits cups with an outside diameter of 39 mm such as Shimano Dura-Ace 9000 series and XTR 980 series.The other fits 16-notch bearing cups with an outside diameter of 48.5 mm such as FSA MegaEvo.Made in the USA and covered by Park's legendary limited lifetime warranty.
External Bottom Bracket Nut RemoverFits External BB Cups.
Bottom Bracket Remover For Outboard Systems. Compatible with Shimano Hollowtech 2, Truvativ GXP, FSA MegaExo and RaceFace X-Type bottom brackets. Includes tool for Shimano non drive crank arm adjustment cap and also 15mm hex for Truvativ LH crank bolt as found on certain models.
Having the right tool for the job is essential when working on modern bicycles. Pedro's socket tools give a professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's socket tools are made from heat-treated S2 tool steel for the ultimate in strength and long-lasting performance. Working closely with each manufacturer, Pedro's designed each socket tool to fit perfectly protecting the component and ensuring simple and safe usage for the mechanic. Each is designed to work seamlessly with Pedro's snap-channel Pro Socket handle, with any 24mm socket/wrench, or in a bench vise. The Campagnolo Bottom Bracket and Cassette Socket is compatible with all Campagnolo cassette lockrings and Record, Chorus, Centaur, and Athena bottom brackets.
Having the right tool for the job is essential when working on modern bicycles. Pedro's socket tools give the professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's socket tools are made from heat-treated S2 tool steel for the ultimate in strength and long-lasting performance. Working closely with each manufacturer, Pedro's designed each socket tool to fit perfectly protecting the component and ensuring simple and safe usage for the mechanic. Each is designed to work seamlessly with Pedro's snap-channel Pro Socket handle, with any 24mm socket/wrench, with any square 1/2" drive, or in a bench vise. The Pedro's Splined Bottom Bracket Socket fits Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups.
The 10mm crank bolts often require high torque and a special tool. Pedro's led the way with a tool up to these tasks. Our 10mm hex crank driver was specifically designed for quick-and-easy crank installation and removal including the Campagnolo® Ultra-Torque.Features include An ergonomic dual-density screw driver handle for comfort and control, ,Extra long hex key for exceptional leverage,A second ball end for quick and easy installation or removal,Heat-treated S2 tool steel construction for the ultimate in strength and long-lasting performance,Also perfect for Mavic freehub body removal. .