Fox Suspension 36 Float Factory FIT4 Boost Fork (2023)Just when you thought the 36 Float Factory FIT4 mountain bike (MTB) fork couldn't be improved any further, Fox Suspension has updated it to be stiffer, stronger and lighter than before. This smooth performing enduro-ready model also boasts the renowned Kashima coating and offers a wide range of adjustments.This race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has also equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer: 1.1/8" to 1.5" Tapered Offset: 44mm Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory Grip2 Boost Fork (2023)Boasting the best features and technologies that Fox has to offer, the race-proven 36 Float Factory Grip2 Boost Fork will enable you to dominate the toughest trails on your all mountain bike (MTB).Prepared for everything from backcountry adventures to day-long epics on your favourite mountain bike (MTB) trails, this suspension fork is engineered for the demands of modern all mountain riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride.Fox Suspension Factory Series"Factory" says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. This version of the FOX 36 also receives an update in the form of an updated crown with an revised design and engineering for more steerer tube overlap improving durability and maintaining stiffness while dropping 20 grams.MTB Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Features: Steerer Tube Material: Aluminium Crown Material: Aluminium Stanchion Tube Material: Aluminium Lower Tube Material: Magnesium Upper Leg Finish: Genuine Kashima Coat Use: All Mountain, Enduro Air Spring: Float EVOL Damper: GRIP2 with dual VVC (Variable Valve Control) Adjustment: High and low-speed compression, high and low-speed rebound, air pressure adjusts Steerer: 1 1/8-1.5" tapered Axle Type: 15 x 110mm Boost Brake Mount: Disc PM 7" (180mm direct mount) Stanchion Tube Diameter: 36mmOffset: 44mm Remote Operated: No Lever Operated: Yes Lockout: No Wheel Size: Multiple options available Floating Axle Included: Yes Mudguard mounts: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (sold separately)Technologies:Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicksFloating Axle: Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The updated 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your rideLower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travelBleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsivenessLower Leg Arch: The arch design of the updated 36, 38, and 40 models are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's updated arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory Grip2 Boost Fork (2022)Designed for all-mountain and enduro racing, this Fork from Fox Suspension combines quality with lightweight stiffness for unrivalled durability. It features a GRIP damper with dual variable valve control and a Float EVOL air spring so you can adjust pressure and speed compression with ease. This fork also benefits from a Kashima coating for enhanced durability and long-lasting performance when tackling tough trails. Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.Features: Steerer Tube Material: Aluminium Crown Material: Aluminium Stanchion Tube Material: Aluminium Lower Tube Material: Magnesium Upper Leg Finish: Genuine Kashima Coat Use: All Mountain, Enduro Air Spring: Float EVOL Damper: GRIP2 with dual VVC (Variable Valve Control) Adjustment: High and low-speed compression, high and low-speed rebound, air pressure adjusts Steerer: 1 1/8-1.5" tapered Axle Type: 15 x 110mm Boost Brake Mount: Disc PM 7" (180mm direct mount) Stanchion Tube Diameter: 36mmOffset: 44mm Remote Operated: No Lever Operated: Yes Lockout: No Wheel Size: Multiple options available Floating Axle Included: Yes Mudguard mounts: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (sold separately)Technologies:Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicksFloating Axle: Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The updated 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your rideLower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travelBleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsivenessLower Leg Arch: The arch design of the updated 36, 38, and 40 models are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's updated arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float SC Factory Remote ForkIf you're serious about gaining a competitive advantage on the toughest cross country (XC) racing trails, the 34 Float SC Factory model is the ideal mountain bike (MTB) fork choice. Its Kashima coated stanchions ensure super-smooth travel to help you maintain your speed over tree roots, rock gardens and anything else the trail throws at you.Part of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised XC racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Boost Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160mm direct Post Mount, Up to 180mm compatible Remote Compatible: Yes (sold separately) Offset: 44mm Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of materialBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float SC Factory Remote ForkIf you're serious about gaining a competitive advantage on the toughest cross country (XC) racing trails, the 34 Float SC Factory model is the ideal mountain bike (MTB) fork choice. Its Kashima coated stanchions ensure super-smooth travel to help you maintain your speed over tree roots, rock gardens and anything else the trail throws at you.Part of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised XC racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Boost Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160mm direct Post Mount, Up to 180mm compatible Remote Compatible: Yes (sold separately) Offset: 44mm Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of materialBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Exposure Boost and TraceR MK2 Light PackThe definitive, lightweight front and rear light set for urban commuting or daytime visibility. Utilising the form of the Trace and Trace R lights the BOOST and BOOST-R RA offer more Lumens out front, 325 or twice the run time, up to 48 hours, to safe guard the rear; USB charging for convenience, a choice of 6 burn times, DayBright pulse pattern and a specific lens design to ensure that the one LED has the power to penetrate through the urban traffic and side illumination for 360 ̊ visibility from over 1 kilometre away, with the BOOST-R RA packed with ReAKT and Peloton technology to make sure this front and rear pack is ready for any activity day or night.In the Box: BOOST DB & BOOST-R ReAKT, Seatpost Mount, Handlebar Mount, 2 x Micro USB Charge Cable, QS Guide.Features: Material: Anodised 6063 Aluminium LEDs: 1x White XPL2; 1x Red XPE-R IP Rating: IP65 Max Lumens: Front: 325; Rear: 80 Battery: 1400 mAh Lithium Ion Runtime: 6 - 48 hours Burntime: Min: 6 hours; Max: 48 hours Charging Time: 4 Hours Dimensions: Length: 66mm; Head: 28mm; Back: 22mm Weight: 45g (each)Technologies: Reakt: Rear lighting that flares up automatically under braking. It can also intelligently adapt to the surrounding ambient light conditions to maintain maximum contrast and visibility, for example brightening for street lit areas and moving into sunlight from shade. OMS: Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast. ITM: Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once the light has cooled, the power is automatically restored. Fuel Gauge: Using a traffic light system remaining runtime is easily monitored at a glance so you're not caught out. The colour feedback is also used for mode selection, before defaulting back to runtime. Day Bright: Bespoke pulse pattern designed for daylight use which is more conspicuous than a regular pulse and visible over a kilometre away, even in the brightest conditions. DayBright mode will you noticed. Be Seen be Safe.Manufacturer's Part Number: EXPBOOSTPACKRAGMBBuy Exposure Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Exposure BoostR Rear Light with DayBrightThe Boost R, taking the massively prevalent form of the Trace R and designing a rear light with twice the burn times with just a 10-gram increase in weight. This rear end guardian comes with a high-capacity Lithium-Ion battery it produces both a powerful output and long burn times. Featuring DayBright pulse pattern to cut through the distractions of busy roads. With long burn times, the Boost R is the perfect partner for your weekly commute or packing adventure, both day and night.Features: Material: Anodised 6063 Aluminium LEDs: 1 x Red XPE-R IP Rating: IP65 Max Lumens: 80 Battery: 1400 mAh Li-Ion Runtime: 6 - 48 Hours Charge Time: 3 Burntime: Min 6 hours; Max 48 hrs (FL) Battery Capacity: 3500 mAh Li-ion Dimensions (mm): Length: 66: Head: 28; Back: 22 In The Box: Boost-R Daybright, Seatpost Mount, Micro USB Charge Cable, QS Guide Weight: 45gTechnologies: OMS: Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast. ITM: Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once the light has cooled, the power is automatically restored. Fuel Gauge: Using a traffic light system remaining runtime is easily monitored at a glance so you're not caught out. The colour feedback is also used for mode selection, before defaulting back to runtime. Day Bright: Bespoke pulse pattern designed for daylight use which is more conspicuous than a regular pulse and visible over a kilometre away, even in the brightest conditions. DayBright mode will you noticed. Be Seen be Safe.Manufacturer's Part Number: EXPBOOSTRDBBuy Exposure Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Exposure BoostR Rear LightThe Boost-R ReAKT, taking the hugely popular form of the Trace R and creating a rear light with twice the burn times with just a 10-gram increase in weight. New quarter-turn locking bracket to ensure the BoostR is safe and secure. ReAKT (Ambient Kinetic Technology) is the latest innovation automatically adapting the light to conditions, flaring up to 150 lumens under braking or entering brighter environments, with the addition of Peloton mode allowing the Boost to dim when the light from the rider behind is detected.Features: Material: Anodised 6063 Aluminium LEDs: 1 x Red XPE-R IP Rating: IP65 Max Lumens: 80 (150 ReAKT Flare) Battery: 1400 mAh Li-Ion Runtime: 6 - 48 Hours Charge Time: 3 Hours Burntime: Min: 6 hours; Max: 48 hours (FL) Battery Capacity: 3500 mAh Li ion Dimensions: Length: 66; Head: 28; Back: 22 In The Box: Boost-R ReAKT, Seatpost Mount, Micro USB Charge Cable, QS Guide Weight: 45gTechnologies: Reakt: Rear lighting that flares up automatically under braking. It can also intelligently adapt to the surrounding ambient light conditions to maintain maximum contrast and visibility, for example brightening for street lit areas and moving into sunlight from shade. OMS: Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast. ITM: Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once the light has cooled, the power is automatically restored. Fuel Gauge: Using a traffic light system remaining runtime is easily monitored at a glance so you're not caught out. The colour feedback is also used for mode selection, before defaulting back to runtime. Day Bright: Bespoke pulse pattern designed for daylight use which is more conspicuous than a regular pulse and visible over a kilometre away, even in the brightest conditions. DayBright mode will you noticed. Be Seen be Safe. Peloton Mode: Enables the rear lights to automatically dim down when the front light of the rider behind is detected , preventing dazzling in a chain gang, it then flares when at the back of the pack for maximum safety.Manufacturer's Part Number: EXPBOOSTRRABuy Exposure Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Aeffect-R 30mm Rear WheelAn excellent back wheel to push your all mountain exertions to the limit, this Race Face roller makes the most of its alloy construction and 30mm width to keep you running with confidence and composure when your route gets more rugged. The width ensures a reliable surface contact area to maintain balance and poise across unpredictable terrains, while the strength of the alloy build helps it stand up to the toughest tests. High-Engagement Rear Hub and Disc-Brake CompatibilityHelping this rampant rear wheel maintain a smooth spin and a supportive performance is the Race Face Trace hub. Also alloy-made, it features custom sealed cartridge bearings to ensure a consistent feel as you roll from trail to trail. The hub also houses a snappy freehub which provides 9.2 degrees of engagement and comes with the option of SRAM XD or Shimano compatibility, for added thrust as you take on tricky climbs and sprints. A tubeless-ready design and disc brake optimisation make this a top choice of back wheel for today's off-road adventurer. Features: Use: Trail/AM/Enduro Rim: Alloy Clincher (Tubeless-Ready) Rim Width: 30mm (inner) Brake Standard: Disc Brake (6 Hole) Hub: Race Face Trace, Alloy, custom sealed Cartridge Bearings; 9.2 degrees of engagement (rear) Hub Spacing: 12x148mm (Boost) or 12x142mm (thru-axle) options Freehub: SRAM XD or Shimano options Spokes: Straight-pull, double-butted; 28 (front); 28 (rear); 3X pattern Nipples: Silver Brass Weight: 1.05kgBuy Race Face Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Aeffect-R 30mm Front WheelA strong and sturdy front wheel to lead you to all mountain mastery and enduro excellence, this alloy-built Race Face roller is well-equipped for everything your off-road adventures have to offer. Measuring a 30mm internal width, it supplies every ride with a consistent surface contact area to keep you primed and poised, no matter how rough and ready the trails become. Smooth-Spinning Hub and Disc-Brake CompatibilityThe alloy construction ensures a stiff and responsive performance as you blast across mixed terrains and take on daring downhill dives. The Race Face Trace hub gives a supportive showing and keeps the wheel spinning with superb smoothness thanks to its custom sealed cartridge bearings. A tubeless-ready design and disc brake optimisation round out this modern MTB front wheel. Features: Use: Trail/AM/Enduro Rim: Alloy Clincher (Tubeless-Ready) Rim Width: 30mm (inner) Brake Standard: Disc Brake (6 Hole) Hub: Race Face Trace, Alloy, custom sealed Cartridge Bearings Hub Spacing: 15x110mm (Boost) or 15x100mm (thru-axle) options Spokes: Straight-pull, double-butted; 28 (front); 28 (rear); 3X pattern Nipples: Silver Brass Weight: 881gBuy Race Face Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano M618 Boost Rear HubThis rear hub features 12x148mm dropout spacing, durable and efficient angular contact bearings, high-quality sealing and is compatible with 8/9/10-Speed cassettes and centre lock disc rotors.Durable smooth-rolling sealed Boost Deore 10-speed rear hub with Centre-Lock disc rotor mount, this hub features a Centre Lock disc rotor fitting that's ideal for use with Shimano hydraulic and mechanical disc brake systems.Durable and Reliable Angular Contact BearingsThis rear hub uses angular contact bearings that ensure radial and lateral bearing support for superior strength and durability in real-world riding conditions while also providing precision bearing adjustment and easy maintenance.Smooth, Stable and Dependable Off-Road Mountain Bike Rear HubThe M618 Boost hub features a low maintenance design that includes single contact seals to keep out mud and water. Plus, low-friction Cubic Boron Nitride treatment cone race surfaces ensure smooth rotational action and long bearing life. And, it's suitable for use with 148mm frame dropouts using a 12mm thru-axle.Also, it features an internal grease sleeve to help maintain and increase the service life of the hub and protects the grease by holding it securely in the bearing housing.Features: Bearing: Cone-bearing Axle Diameter: 12mm Assmebly Width: 148mm Waterproof Bearing: Yes Number of Holes to Spoke Flange: 32 Brake Type: Disc brake, Centre-Lock Axle: Thru-axle 12mmx148mm E-Thru Boost rear hub Durable for less maintenance cycle Angular contact Cup & Cone Bearing with grease sleeve High-quality sealing (Labyrinth and Contact) Centre Lock Disc rotor mount 10/9/8-speed compatible Weight: 357gA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano M618 Boost Rear HubThis rear hub features 12x148mm dropout spacing, durable and efficient angular contact bearings, high-quality sealing and is compatible with 8/9/10-Speed cassettes and centre lock disc rotors.Durable smooth-rolling sealed Boost Deore 10-speed rear hub with Centre-Lock disc rotor mount, this hub features a Centre Lock disc rotor fitting that's ideal for use with Shimano hydraulic and mechanical disc brake systems.Durable and Reliable Angular Contact BearingsThis rear hub uses angular contact bearings that ensure radial and lateral bearing support for superior strength and durability in real-world riding conditions while also providing precision bearing adjustment and easy maintenance.Smooth, Stable and Dependable Off-Road Mountain Bike Rear HubThe M618 Boost hub features a low maintenance design that includes single contact seals to keep out mud and water. Plus, low-friction Cubic Boron Nitride treatment cone race surfaces ensure smooth rotational action and long bearing life. And, it's suitable for use with 148mm frame dropouts using a 12mm thru-axle.Also, it features an internal grease sleeve to help maintain and increase the service life of the hub and protects the grease by holding it securely in the bearing housing.Features: Bearing: Cone-bearing Axle Diameter: 12mm Assmebly Width: 148mm Waterproof Bearing: Yes Number of Holes to Spoke Flange: 32 Brake Type: Disc brake, Centre-Lock Axle: Thru-axle 12mmx148mm E-Thru Boost rear hub Durable for less maintenance cycle Angular contact Cup & Cone Bearing with grease sleeve High-quality sealing (Labyrinth and Contact) Centre Lock Disc rotor mount 10/9/8-speed compatible Weight: 357gA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.