DVO Suspension Sapphire D1 Boost MTB Fork 27.5" A big and bold fork for the boisterous MTB rider, this Sapphire D1 model by DVO combines a hard-wearing aluminium construction with excellent adjustability, allowing you to take on every trail with confidence, composure and control. Equipped with a Boost-sized axle for enhanced stiffness and handling on the most demanding routes, no journey up, down or across the mountain is too intimidating. Boost-Sized, Trail-Taming MTB ForkThis sturdily-built fork comes complete with six clicks of low-speed compression adjustment and over 30 high-speed adjustments to let you set your suspension to your preference for the route ahead. Supported by Off The Top (OTT) and Advanced Volume Adjust (AVA) settings, as well as 14 clicks of shim stack-controlled damping, every surface is made super smooth to keep you rolling reliably from start to finish. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression Shim Stack, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 150mm Axle: 15x110 mm Boost thru axle (bolted) Offset: 42mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Sapphire D1 Boost MTB Fork 27.5" A big and bold fork for the boisterous MTB rider, this Sapphire D1 model by DVO combines a hard-wearing aluminium construction with excellent adjustability, allowing you to take on every trail with confidence, composure and control. Equipped with a Boost-sized axle for enhanced stiffness and handling on the most demanding routes, no journey up, down or across the mountain is too intimidating. Boost-Sized, Trail-Taming MTB ForkThis sturdily-built fork comes complete with six clicks of low-speed compression adjustment and over 30 high-speed adjustments to let you set your suspension to your preference for the route ahead. Supported by Off The Top (OTT) and Advanced Volume Adjust (AVA) settings, as well as 14 clicks of shim stack-controlled damping, every surface is made super smooth to keep you rolling reliably from start to finish. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression Shim Stack, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 150mm Axle: 15x110 mm Boost thru axle (bolted) Offset: 42mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%. Mechanicsm is triple-sealed, and uses a steel axle w/pinch bolt to decrease deflection.All of our e*spec wheels can be used on any regular non-eBike. Wheelsets can be mixed or matched for either full 27.5+, full 29, or jump on the #mulletbus. Key Features: Axle: 110 x 15mm (Boost),Drilling: 28h,Included: Material: 6069 Aluminum, Spokes/Nipples: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers,Width: 35mm internal width.
e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%. e*spec hubs still have 6-degree engagement, but use an outboard bearing to better support the driver body and disperse loads. Mechanicsm is triple-sealed, and uses a steel axle w/pinch bolt to decrease deflection.All of our e*spec wheels can be used on any regular non-eBike. Wheelsets can be mixed or matched for either full 27.5+, full 29, or jump on the #mulletbus. Key Features: Engagement:6 Degree,Freehub Mount: XD Drive,Hub: e*spec rear hub, specially designed for eBike use.,Axle: Steel axle w/pinch bolt,Included: tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm endcaps,Spokes/Nipples: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers,Axle: 148 x 12mm,Drilling: 28h,Material: Aluminium 6069,Width: 35mm internal width.
e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%. Mechanicsm is triple-sealed, and uses a steel axle w/pinch bolt to decrease deflection.All of our e*spec wheels can be used on any regular non-eBike. Wheelsets can be mixed or matched for either full 27.5+, full 29, or jump on the #mulletbus. Key Features: Axle: 110 x 15mm (Boost),Drilling: 28h,Included: Material: 6069 Aluminum, Spokes/Nipples: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers,Width: 35mm internal width.
e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%. e*spec hubs still have 6-degree engagement, but use an outboard bearing to better support the driver body and disperse loads. Mechanicsm is triple-sealed, and uses a steel axle w/pinch bolt to decrease deflection. Key Features: Engagement:6 Degree,Freehub Mount: XD Drive,Hub: e*spec rear hub, specially designed for eBike use.,Axle: Steel axle w/pinch bolt,Included: tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm endcaps,Spokes/Nipples: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers,Axle: 148 x 12mm,Drilling: 28h,Material: Aluminium 6069,Width: 30mm internal width.
e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%.All of our e*spec wheels can be used on any regular non-eBike. Wheelsets can be mixed or matched for either full 27.5+, full 29, or jump on the #mulletbus.The (IW28) internal width 28mm wheelset comes in at only 1,520g and better suits trail riders using slightly larger tyres. Key Features: Axle: 110 x 15mm,Drilling: 28h,Material: World Cup Developed Carbon,Spokes: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers,Included: spoke x3, nipple x3, nipple washer x3,, Width: 35mm internal width.
Born out of a strong Downhill racing heritage, our LG1 Enduro wheels are ready for anything you can throw at them.All-aluminium hubs maximize durability, wide flange and bearing structure provides a strong and nearly dishless wheel build, and 30mm inner width rims provide the perfect platform for tires 2.3-2.6" wide. Long-term durability built in a way that won't break the bank.Tubeless ready with tape and valves installed. Key Features: Axle: 110 x 15mm (Boost),Drilling: 28h,Included: Material: 6069 Aluminum, Spokes/Nipples: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers,Width: 30mm internal width.
Born out of a strong Downhill racing heritage, our LG1 Enduro wheels are ready for anything you can throw at them.All-aluminium hubs maximize durability, wide flange and bearing structure provides a strong and nearly dishless wheel build, and 30mm inner width rims provide the perfect platform for tyres 2.3-2.6" wide. Long-term durability built in a way that won't break the bank.Tubeless ready with tape and valves installed. Key Features: Engagement:6 Degree,Freehub Mount: XD Drive,Hub: Triple-sealed, fully machined aluminium hub w/6 degree engagement.,Rim: 30mm internal width, aluminium, welded, hookless, 28h,Included: tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm endcaps,Spokes/Nipples: Custom Hive triple-butted black steel spokes, black alloy nipples, nipple washers (x28),Axle: 148 x 12mm,Drilling: 28h,Material: Aluminium,idth: 30mm internal width.
Born out of a strong Downhill racing heritage, our LG1 Enduro wheels are ready for anything you can throw at them.All-aluminium hubs maximize durability, wide flange and bearing structure provides a strong and nearly dishless wheel build, and 30mm inner width rims provide the perfect platform for tires 2.3-2.6" wide. Long-term durability built in a way that won't break the bank.Tubeless ready with tape and valves installed. Key Features: Engagement: 6 Degree,Freehub Mount: Shimano™ Microspline™ Drive, XD Drive,Hub: Triple-sealed, fully machined aluminium hub w/6 degree engagement.,Included: tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm endcaps,Spokes/Nipples: Custom Hive triple-butted black steel spokes, black alloy nipples, nipple washers (x28),Axle: 148 x 12mm,Drilling: 28h,Material: Aluminium,Width: 30mm internal width.
Born out of World Cup downhill racing, our LG1 Race Carbon Enduro wheels are ready for anything you can throw at them.All-aluminum hubs maximize durability, wide flange and bearing structure provides a strong and nearly dishless wheel build, and 30mm inner width rims provide the perfect platform for tyres 2.3-2.6" wide. Key Features: Engagement: 6 Degree, Rim: World-Cup developed carbon layup, hookless, 30mm internal width with Lifetime Guarantee,Freehub Mount: Microspline Drive, XD Driver, Hub: Triple-sealed, fully machined aluminium hub w/6 degree engagement.,Included: tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm endcaps,Spokes/Nipples: Custom Hive triple-butted black steel spokes, black alloy nipples, nipple washers (x28),Axle: 148 x 12mm,Drilling: 28h,Material: Carbon,Width: 30mm internal width.
Born out of World Cup downhill racing, our LG1 Race Carbon Enduro wheels are ready for anything you can throw at them.All-aluminium hubs maximize durability, wide flange and bearing structure provides a strong and nearly dishless wheel build, and 30mm inner width rims provide the perfect platform for tires 2.3-2.6" wide. Key Features: Axle: 110 x 15mm,Drilling: 28h,Included: Wheel, tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm front endcaps, Rim: World-Cup developed carbon layup, hookless, 30mm internal width with lifetime guarantee, Spokes/Nipples: Custom Hive triple-butted black steel spokes, black alloy nipples, nipple washers (x28),Weight: 1810g,Width: 30mm internal width.