DVO Suspension Sapphire D1 Boost MTB Fork 27.5" A big and bold fork for the boisterous MTB rider, this Sapphire D1 model by DVO combines a hard-wearing aluminium construction with excellent adjustability, allowing you to take on every trail with confidence, composure and control. Equipped with a Boost-sized axle for enhanced stiffness and handling on the most demanding routes, no journey up, down or across the mountain is too intimidating. Boost-Sized, Trail-Taming MTB ForkThis sturdily-built fork comes complete with six clicks of low-speed compression adjustment and over 30 high-speed adjustments to let you set your suspension to your preference for the route ahead. Supported by Off The Top (OTT) and Advanced Volume Adjust (AVA) settings, as well as 14 clicks of shim stack-controlled damping, every surface is made super smooth to keep you rolling reliably from start to finish. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression Shim Stack, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 150mm Axle: 15x110 mm Boost thru axle (bolted) Offset: 42mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Sapphire D1 Boost MTB Fork 27.5" A big and bold fork for the boisterous MTB rider, this Sapphire D1 model by DVO combines a hard-wearing aluminium construction with excellent adjustability, allowing you to take on every trail with confidence, composure and control. Equipped with a Boost-sized axle for enhanced stiffness and handling on the most demanding routes, no journey up, down or across the mountain is too intimidating. Boost-Sized, Trail-Taming MTB ForkThis sturdily-built fork comes complete with six clicks of low-speed compression adjustment and over 30 high-speed adjustments to let you set your suspension to your preference for the route ahead. Supported by Off The Top (OTT) and Advanced Volume Adjust (AVA) settings, as well as 14 clicks of shim stack-controlled damping, every surface is made super smooth to keep you rolling reliably from start to finish. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression Shim Stack, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 150mm Axle: 15x110 mm Boost thru axle (bolted) Offset: 42mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Sapphire D1 Boost Fork 29"This durable Boost Fork from DVO Suspension features a hard-wearing a lightweight aluminium construction and the finest technology DVO has to offer. Benefiting from an assortment of surface-smoothing adjustments, this D1 model lets you tailor your ride for your chosen route.Boost-Sized, 29" ForkEnsuring you have the most composed and comfortable ride on every outing, this excellent fork features a wide range of adjustments. This includes six clicks of low-speed compression adjustment and over 30 high-speed adjustments. alongside Off The Top (OTT) and Advanced Volume Adjust (AVA) damping. With a further 14 clicks of shim stack-controlled damping, no terrain is too much for this stellar suspension set-up.Features:Axle Type: 15mm Bolted- Boost SpacingSteerer Material: AluminiumCrown Material: Forged AluminiumStanchion Material: Aluminium, 34mmLower Material: Magnesium castingSuspension: Air, OTT adjustment (negative spring preload)Damping: Closed cartridge bladder systemSteerer Diameter: 1 1/8-1.5", taperedAdjustments: High-speed and low-speed compression Shim Stack, rebound, OTT, air pressureTravel: 140mmAxle: 15x110mm Boost thru-axle (bolted)Offset: 44mmAdjustments: High/Low-Speed Compression, Rebound, Volume SpacersWheel Size: 27.5; 29Weight: 1900gBuy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Sapphire D1 Boost Fork 29"This durable Boost Fork from DVO Suspension features a hard-wearing a lightweight aluminium construction and the finest technology DVO has to offer. Benefiting from an assortment of surface-smoothing adjustments, this D1 model lets you tailor your ride for your chosen route.Boost-Sized, 29" ForkEnsuring you have the most composed and comfortable ride on every outing, this excellent fork features a wide range of adjustments. This includes six clicks of low-speed compression adjustment and over 30 high-speed adjustments. alongside Off The Top (OTT) and Advanced Volume Adjust (AVA) damping. With a further 14 clicks of shim stack-controlled damping, no terrain is too much for this stellar suspension set-up.Features:Axle Type: 15mm Bolted- Boost SpacingSteerer Material: AluminiumCrown Material: Forged AluminiumStanchion Material: Aluminium, 34mmLower Material: Magnesium castingSuspension: Air, OTT adjustment (negative spring preload)Damping: Closed cartridge bladder systemSteerer Diameter: 1 1/8-1.5", taperedAdjustments: High-speed and low-speed compression Shim Stack, rebound, OTT, air pressureTravel: 140mmAxle: 15x110mm Boost thru-axle (bolted)Offset: 44mmAdjustments: High/Low-Speed Compression, Rebound, Volume SpacersWheel Size: 27.5; 29Weight: 1900gBuy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Sapphire D1 Boost Fork 29"This durable Boost Fork from DVO Suspension features a hard-wearing a lightweight aluminium construction and the finest technology DVO has to offer. Benefiting from an assortment of surface-smoothing adjustments, this D1 model lets you tailor your ride for your chosen route.Boost-Sized, 29" ForkEnsuring you have the most composed and comfortable ride on every outing, this excellent fork features a wide range of adjustments. This includes six clicks of low-speed compression adjustment and over 30 high-speed adjustments. alongside Off The Top (OTT) and Advanced Volume Adjust (AVA) damping. With a further 14 clicks of shim stack-controlled damping, no terrain is too much for this stellar suspension set-up.Features:Axle Type: 15mm Bolted- Boost SpacingSteerer Material: AluminiumCrown Material: Forged AluminiumStanchion Material: Aluminium, 34mmLower Material: Magnesium castingSuspension: Air, OTT adjustment (negative spring preload)Damping: Closed cartridge bladder systemSteerer Diameter: 1 1/8-1.5", taperedAdjustments: High-speed and low-speed compression Shim Stack, rebound, OTT, air pressureTravel: 140mmAxle: 15x110mm Boost thru-axle (bolted)Offset: 44mmAdjustments: High/Low-Speed Compression, Rebound, Volume SpacersWheel Size: 27.5; 29Weight: 1900gBuy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Mezzer Pro Boost Mountain Bike ForkThese brilliant forks are perfect for taking your enduro riding up a notch as they offer unbeatable adjustability and control. Ready for battle, this stunning duo features a deep hollow-forged aluminium crown for phenomenal toughness as you race for the podium. Furthermore, their 7050 butted aluminium legs provide another layer of durability and longevity as you shred across challenging terrain conditions against the clock.Adjustable MTB ForksIdeal for adrenaline-fuelled rides, these forks are equipped with some of the best adjustable features to propel you up the leaderboard. Their adjustable low and high speed compression damping, hydraulic bottom-out circuit and a fully adjustable air spring gives you the freedom to dial in your settings exactly how you want. As a result, you'll enjoy being able to effortlessly set-up your forks to match your specific riding style, discipline or the terrain conditions.Features: Crown Material: Deep hollow-forged Aluminium Leg Material: 7050 butted Aluminum Use: MTB, Enduro, E-bike certified Spring: Dorado Air/IRT Cartridge: MC² bladder cartridge Wipers: Low friction SKF Hose Routing: Front and rear brake hose routing Steerer: 1 1/8"-1.5" tapered Travel: 140-180mm Offset: 37, 44 (27.5 version); 44, 51 (29 version) Axle: Hexlock SL, 15x110mm Brake Mount: Disc PM7 (direct mount 180mm) Compression Damping: MC2 Rebound Damping: Adjustable TPC Cartridge Adjustments: High speed compression, low speed compression, low speed rebound, Infinite Rate Tune (IRT), air pressure Stanchions: 37mm Max Tyre: With Fender: 2.6"; Without Fender: 2.8" Included: Fender/travel spacers Weight: 2kg (approx)Technologies: Reverse Arch: Reverse Arch has equivalent stiffness with less weight. By placing the arch in the rear, behind the high point of the tyre, Manitou's reverse arch design achieves equivalent stiffness with less weight. The arch is shorter in height, resulting in more efficient use of material. MC² (Multi-Control Compression): Manitou's MC² (Multi-Control Compression) Damper comes in a fully sealed bladder cartridge offering independent Lo Speed and Hi Speed Compression adjustments. TPC Rebound: Two Stage Shim Stack to better isolate low speed and high speed rebound damping. Optimizes the rebound response for short travel chatter and deep travel hits without the complexity of adding in another adjuster. Bladder Cartridge: The sealed system separates air from the oil in the damper maintaining damping consistency in the most severe riding conditions. The new Mezzer bladder cartridge reduces the oil volume resulting in a lower overall weight. At the same time it assures a low brake away force from optimized shaft seal design. Blow Off Valve: Patent pending bladder blow off valve prevents over pressurisation and rupture of the bladder. HBO (Hydraulic Bottom Out): The internal HBO circuit ramps up damping during the final 30mm of travel protecting you from hard unexpected bottom-outs. Dorado Air: Our lowest weight World Cup proven high performance air spring technology offering ultimate sensitivity, featuring a selfequalizing” negative air spring. Originally developed for the Dorado down hill fork, Dorado air has a single fill valve (on the bottom of the fork) that simultaneously fills the positive and negative air chambers, so the pressure is equalised. IRT (Infinite Rate Tune: Infinite Rate Tune (IRT) allows the rider to control mid stroke support and bottom out progressivity independent from initial sp ring rate to independently tune small bump sensitivity and big hit performance. Hollow-bore Crown: Chassis stiffness and weight optimized with Manitou's patented Hollow-Bore Crown. Low Friction Wipers: Proprietary SKF low-friction rubber compound and sealing lip profile to further reduce the friction in the Mezzer. New Hexlock SL2: The new tooled Hexlock SL2 axle saves 26g over the previous version).Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Axle for Rockshox and Fat ForksUnlike standard front axles, this high-quality model uses a captive steel washer under its head to reduce friction on the fork leg. This protects your expensive fork by transferring more of the tightening torque to clamping load for a stiffer interface. As a result, this also prevents the axle from sticking, so you can enjoy straightforward removal. Ideal for replacing your lost or damaged stock axle, this is an excellent choice for riders who want a rock-solid component. Features: Material: 7075 T6 Aluminium with plated Steel washer Use: MTB Compatibility: RockShox and Boost suspension forks Thread Spec: 15x1.5 Thread Length: 12mm Length: 110mm Weight: 45g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Axle for Rockshox and Fat ForksUnlike standard front axles, this high-quality model uses a captive steel washer under its head to reduce friction on the fork leg. This protects your expensive fork by transferring more of the tightening torque to clamping load for a stiffer interface. As a result, this also prevents the axle from sticking, so you can enjoy straightforward removal. Ideal for replacing your lost or damaged stock axle, this is an excellent choice for riders who want a rock-solid component. Features: Material: 7075 T6 Aluminium with plated Steel washer Use: MTB Compatibility: RockShox and Boost suspension forks Thread Spec: 15x1.5 Thread Length: 12mm Length: 110mm Weight: 45g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Axle for Rockshox and Fat ForksUnlike standard front axles, this high-quality model uses a captive steel washer under its head to reduce friction on the fork leg. This protects your expensive fork by transferring more of the tightening torque to clamping load for a stiffer interface. As a result, this also prevents the axle from sticking, so you can enjoy straightforward removal. Ideal for replacing your lost or damaged stock axle, this is an excellent choice for riders who want a rock-solid component. Features: Material: 7075 T6 Aluminium with plated Steel washer Use: MTB Compatibility: RockShox and Boost suspension forks Thread Spec: 15x1.5 Thread Length: 12mm Length: 110mm Weight: 45g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
X Fusion Trace 36 HLR Boost ForksThese high-quality forks are tailored for cross-country use as they allow for superb impact resistance and control across mixed terrains. They feature a sturdy aluminium construction which allows them to handle all the abuse from riding making them great for both competing and leisure riding. Engineered for perfection, these are specially designed for 29er bikes with longer travel as they use a 36mm chassis for smooth and effective damping across diverse terrain conditions.Adjustable Boost MTB ForksAllowing you to dominate during every challenge from the mountain slopes to the forest floor, these off-road champions are kitted out with a Roughcut HLR damper. This allows you to effortlessly fine-tune their high and low speed compression, rebound and air pressure to match your riding preferences and the terrain conditions.Features:Material: AluminiumUse: MTBStanchion Size: 36mmSpring: AirDamper: Roughcut HLRAdjustment: High and low speed compression, rebound, air pressureAxle: 15x110mmWheel Size: 29"Travel: 140mmWeight: 1.9kg (approx)Buy X Fusion Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
X Fusion McQueen 34 HLR Boost ForksReady for fast and rebellious MTB rides, these stunning forks deliver awesome stiffness without adding any unnecessary weight to your ride. X-Fusion has kitted these out with an air spring which absorbs every sudden knock and jolt during your off-road pursuits. This means you can blast as hard as you want across the rock gardens, tree-roots and rowdy trails while maintaining your momentum. Adjustable MTB ForksWhether you're riding after work with your buddies or competing, these solid components provide maximum shock absorption on every daring run. Kitted out with a Roughcut HLR damper, you'll benefit from being able to easily adjust their high and low speed compression and rebound. This allows you to set them up to match your specific riding style and the terrain conditions for a more rider-tuned experience. Features:Material: AluminiumFinish: AnodisedUse: MTBOffset: 46mmAdjustments: High and low speed compression, rebound, air pressureDamper: Roughcut HLRSpring: AirTravel: 140mmAxle: 15x110mm, BoostWeight: 2.1kg (approx)Buy X Fusion Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Marzocchi Bomber Z2 Boost Mountain Bike ForksDesigned for fast-paced mountain bike (MTB) use, the Boost Mountain Bike Forks from Marzocchi Bomber deliver smooth and comfortable front-end suspension for your mountain bike adventures. The durable aluminium upper tube construction allows these forks to handle all the intensity as you dart from trail to trail. Built for exploring further and further, its tough build means it is perfectly capable of withstanding all the challenges that come with days out in the mountains.MTB Fork with EVOL Air SpringPrepared for the most unpredictable of mountain bike rides, this fork is equipped with an EVOL air spring. It works by increasing the negative air spring volume to specifically provide optimum small bump sensitivity. This means you'll enjoy its smooth performance during both the largest and smallest impacts, as you blast across the trails with momentum.Rail Sweep Adjust DamperDeveloped for versatility, this tough mountain bike fork is kitted out with a Rail Sweep Adjust damper. This means you'll enjoy its fully adjustable compression and rebound damping from its dynamic, shim stack design. The Marzocchi Bomber Z2 Boost Fork's mid and high-speed rebound circuit also provides greater control with superior bump recovery. As a result, the fork won't pack down during fast and deep hits as you dominate the trails with precision.Features:Material: 6000-series AluminiumUse: MTBAir Spring: EVOLDamper: Rail Sweep AdjustAxle: 15 Quick Release x 110mmWheel Size: 29"Steerer: TaperedWeight: 2.5kg (approx.)Buy Marzocchi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.