Nukeproof Mega 290 Alloy Mountain Bike Seat Stays (2018-2019) BOOSTShould you be unlucky enough to have a bad crash on the trails and damage the rear section of your Nukeproof mountain bike (MTB), the Nukeproof Mega 290 Alloy Mountain Bike Seat Stays (2018-2019) BOOST will get your ride running like new again. They're genuine alloy replacement seat stays for Nukeproof Mega 290 models from years 2018-2019.Features: Material: T6 6061 Aluminium Alloy For Rear Hub Spacing: 148x12mm (Boost) Suits: Nukeproof Mega 290 model years 2018-2019 Genuine replacement Nukeproof part Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 275 Alloy Mountain Bike Chain Stays (2018-2020) BOOSTShould you be unlucky enough to have a bad crash on the trails and damage the rear section of your Nukeproof mountain bike (MTB), the Nukeproof Mega 275 Alloy Mountain Bike Chain Stays will get your ride running like new again. They're genuine alloy replacement chain stays for Nukeproof Mega 275 models from years 2018-2020.Features: Material: T6 6061 Aluminium Alloy For Rear Hub Spacing: 148x12mm (Boost) Suits: Nukeproof Mega 275 model years 2018-2020 Genuine replacement Nukeproof part Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 275 Alloy Seat Stays 2018-20 BOOSTShould you be unlucky enough to have a bad crash on the trails and damage the rear section of your Nukeproof mountain bike (MTB), these Nukeproof Mega 275 Alloy Mountain Bike Seat Stays will get your ride running like new again. These are genuine alloy replacement seat stays for the Nukeproof Mega 275 model from years 2018-2020.Features: Material: T6 6061 Aluminium Alloy For Rear Hub Spacing: 148x12mm (Boost) Suits: Nukeproof Mega 275 model years 2018-2020 Genuine replacement Nukeproof partBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 290 Alloy Mountain Bike Chain Stays (2018-2020) BOOSTShould you be unlucky enough to have a bad crash on the trails and damage the rear section of your Nukeproof mountain bike (MTB), the Nukeproof Mega 290 Alloy Mountain Bike Chain Stays (2018-2020) BOOST will get your ride running like new again. They're genuine alloy replacement chain stays for Nukeproof Mega 290 models from years 2018-2020.Features: Material: T6 6061 Aluminium Alloy For Rear Hub Spacing: 142x12mm Suits: Nukeproof Mega 290 model years 2018-2020 Genuine replacement Nukeproof part Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 290 Alloy Mountain Bike Seat Stays (2020) BOOSTShould you be unlucky enough to have a bad crash on the trails and damage the rear section of your Nukeproof mountain bike (MTB), the Nukeproof Mega 290 Alloy Mountain Bike Seat Stays will get your ride running like new again. They're genuine alloy replacement chain stays for Nukeproof Mega 290 model years 2020-2021.Features: Material: T6 6061 Aluminium Alloy For Rear Hub Spacing: 148x12mm (Boost) Suits: Nukeproof Mega 290 model years 2020-2021 Genuine replacement Nukeproof part Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Praxis Works Cadet 2x9 Speed Boost ChainsetThe Cadet packs in a level of performance aimed at value-driven riders that want a solid crank. With stiff and solid forged-aluminium arms, a stout M30 alloy spindle and a direct mount ring interface, the new Cadet M30 checks all the boxes. With updated arm shaping and spacing, the new second-generation Cadet is perfect for all types of trail riding.Wave Tech ChainringsTough enough for enduro, downhill, and also weight conscious for XC riding, Praxis MTN Wave rings are machined from 7075 T6 aluminium and hard anodised to take a beating. Their tough aluminium construction makes them hard-wearing and reliable as you weave from trail to trail, while their hard anodised finish gives them additional protection against corrosion during wet riding conditions.Press Fit BB-90 Bottom BracketThis chainset comes complete with a Praxis Works M30 Press Fit BB-90 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings. Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe.Features: Crankarm Material: Forged Aluminium Chainrings Material: 7000 Series Aluminium with Hard Anodised finish Use: Mountain Bike (MTB), Cross Country (XC) Speed: 9 speed Tooth Count: 36/22T Spindle: Alloy M30 spindle (30mm/28mm) Q-Factor: 172mm Offset: 3mm Chainring: 52mm CL Boost Number of Chainrings: 2 Chainrings Included: Yes Chainring Mount: 3-Bolt Direct Mount Bottom Bracket Included: Yes (Press Fit BB-90) Weight: 558g (170mm option)Manufacturer's Part Numbers: 89222991 Black 36/22T 165mm 89222990 Black 36/22T 170mm 89222992 Black 36/22T 175mmBuy Praxis Works Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Praxis Works Cadet 2x10 Speed Boost ChainsetThe Cadet packs in a level of performance aimed at value-driven riders that want a solid crank. With stiff and solid forged-aluminium arms, a stout M30 alloy spindle and a direct mount ring interface, the new Cadet M30 checks all the boxes. With updated arm shaping and spacing, the new second-generation Cadet is perfect for all types of trail riding.Wave Tech ChainringsTough enough for enduro, downhill, and also weight conscious for XC riding, Praxis MTN Wave rings are machined from 7075 T6 aluminium and hard anodised to take a beating. Their tough aluminium construction makes them hard-wearing and reliable as you weave from trail to trail, while their hard anodised finish gives them additional protection against corrosion during wet riding conditions.Press Fit BB-90 Bottom BracketThis chainset comes complete with a Praxis Works M30 Press Fit BB-90 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings. Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe.Features: Crankarm Material: Forged Aluminium Chainrings Material: 7000 Series Aluminium with Hard Anodised finish Use: Mountain Bike (MTB), Cross Country (XC) Speed: 10 speed Tooth Count: 36/26T Spindle: Alloy M30 spindle (30mm/28mm) Q-Factor: 172mm Offset: 3mm Chainring: 52mm CL Boost Number of Chainrings: 2 Chainrings Included: Yes Chainring Mount: 3-Bolt Direct Mount Bottom Bracket Included: Yes (Press Fit BB-90) Weight: 558g (170mm option)Manufacturer's Part Numbers: 89222988 Black 36/26T 170mm 89222989 Black 36/26T 175mmBuy Praxis Works Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Praxis Works Cadet 1x10-11 Speed Boost ChainsetWith updated arm shaping and spacing, the Cadet is perfect for all types of trail riding. It comes trail-ready with forged aluminium crankarms and a tough alloy spindle for the best balance of stiffness, durability and precision with every rotation.Whether you're into mountain bike (MTB) trail riding or cross country (XC) racing, the Cadet packs in a level of performance aimed at value-driven riders that want a solid crank. With the addition of 52mm Boost chainline spacing, this chainset provides increased stiffness for more effective and more precise handling as you charge from trail to trail. Praxis Works has also equipped this model with a three-bolt direct mount (DM) chainring interface, which allows you to use any brand of DM chainring for maximum compatibility.When it comes to a hard-wearing chainset that delivers excellent reliability and performance, the Cadet 1x10-11 Speed Boost Chainset checks all the boxes.Features: Material: Crankarms: Forged Alloy; Spindle: Alloy, 24mm Use: Mountain Bike (MTB), Cross Country (XC) Speed: 10/11 speed Q Factor: 172mm Chainline: 52mm (Boost) Offset Ring: 3mm Chainring: Any brand 3-Bolt Direct Mount ring can be used for SRAM and Shimano Compatibility Main Bolt: 8mm Alloy Main crank bolt for Install/Self-Extract Bottom Bracket Included: No, available separately Weight: 558gBuy Praxis Works Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Selle Italia SLR Boost Gravel Superflow SaddleThis gravel bike saddle features a sleek fibra-tek cover construction, which allows you to enjoy its smooth position changes and lasting durability on longer road adventures. Coming kitted out with robust alloy rails, this saddle keeps you stable and composed as you pedal across the roughest of terrain conditions. Selle Italia has also equipped this gravel-ready saddle with a light gel padding, which reduces the vibrations caused by unpredictable terrains.Unmistakeable style even on gravel roads: SLR Boost Gravel SuperflowThe SLR Boost meets one of the most fascinating and trending disciplines in the cycling market: the SLR Boost Gravel Superflow arrives, designed for those who love dirt track adventures in search of famous “gravel roads”. Compared to the previous road version, the saddle is characterised by the use of Light Gel, a decision made to offer improved padding to the saddle and mitigate the continuous vibrations caused by the roadbed, while guaranteeing high performance and a comfortable seat in all circumstances. The special Hi-Viz inserts located in the rear also guarantee safety and visibility, even during night adventures, and combined with the green coloured detail also contribute to the saddle’s unmistakeable style in line with recent trends in the gravel world.Features: Cover Material: Fibra-Tek Rail Material: TI 316 Tube Finish: Hi-Viz backing Use: Road, Gravel Dimensions: Small: 130x248mm; Large: 145x248mm Rail Dimensions: 7mm Category: Performance Weight: Small: 206g; Large: 211gBuy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Selle Italia SLR Boost Gravel Superflow SaddleThis gravel bike saddle features a sleek fibra-tek cover construction, which allows you to enjoy its smooth position changes and lasting durability on longer road adventures. Coming kitted out with robust alloy rails, this saddle keeps you stable and composed as you pedal across the roughest of terrain conditions. Selle Italia has also equipped this gravel-ready saddle with a light gel padding, which reduces the vibrations caused by unpredictable terrains.Unmistakeable style even on gravel roads: SLR Boost Gravel SuperflowThe SLR Boost meets one of the most fascinating and trending disciplines in the cycling market: the SLR Boost Gravel Superflow arrives, designed for those who love dirt track adventures in search of famous “gravel roads”. Compared to the previous road version, the saddle is characterised by the use of Light Gel, a decision made to offer improved padding to the saddle and mitigate the continuous vibrations caused by the roadbed, while guaranteeing high performance and a comfortable seat in all circumstances. The special Hi-Viz inserts located in the rear also guarantee safety and visibility, even during night adventures, and combined with the green coloured detail also contribute to the saddle’s unmistakeable style in line with recent trends in the gravel world.Features: Cover Material: Fibra-Tek Rail Material: TI 316 Tube Finish: Hi-Viz backing Use: Road, Gravel Dimensions: Small: 130x248mm; Large: 145x248mm Rail Dimensions: 7mm Category: Performance Weight: Small: 206g; Large: 211gBuy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Performance Boost ForkAn ideal addition to your mountain bike's (MTB's) front end for taking on the toughest enduro trails in the World, the 36 Float Performance fork will soak up the biggest drops and hits as you dominate on all types of terrain.This high-quality mountain bike (MTB) suspension fork is trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float air spring and GRIP damper for excellent tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Equipped with some of Fox's finest technologies, this suspension fork is a great choice of upgrade for singletrack trail riding, bike park routes and enduro racing.Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.E-MTB Compatible Suspension ForkCompatible electric mountain bikes (E-MTB), this suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.Fox Suspension GRIP DamperFox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork.Float Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels, which functions to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Black Anodized Intended Use: Trail Air Spring: FLOAT EVOL Damper: GRIP (Open/Medium/Firm) Travel: 160mm Wheel Size: 27.5" Axle: 15QR x 110mm Boost Steerer: 1.1.8" to 1.5" Tapered Offset: 44mm Air Channels: Yes Bleeders: Yes Floating Axle: Yes, Kabolt X Axle 15QR x 110mm Boost Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (Sold separately)Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (Available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Performance Boost ForkAn ideal addition to your mountain bike's (MTB's) front end for taking on the toughest enduro trails in the World, the 36 Float Performance fork will soak up the biggest drops and hits as you dominate on all types of terrain.This high-quality mountain bike (MTB) suspension fork is trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float air spring and GRIP damper for excellent tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Equipped with some of Fox's finest technologies, this suspension fork is a great choice of upgrade for singletrack trail riding, bike park routes and enduro racing.Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.E-MTB Compatible Suspension ForkCompatible electric mountain bikes (E-MTB), this suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.Fox Suspension GRIP DamperFox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork.Float Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels, which functions to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Black Anodized Intended Use: Trail Air Spring: FLOAT EVOL Damper: GRIP (Open/Medium/Firm) Travel: 160mm Wheel Size: 27.5" Axle: 15QR x 110mm Boost Steerer: 1.1.8" to 1.5" Tapered Offset: 44mm Air Channels: Yes Bleeders: Yes Floating Axle: Yes, Kabolt X Axle 15QR x 110mm Boost Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (Sold separately)Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (Available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.