Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 5)With their tough aluminium construction, this pack of aluminium chainring bolts and nuts is a great upgrade to replace your old or lost parts and to breathe new life back into your setup. They're are suitable for use on Wolf Tooth bolt-on Drop-Stop chainrings with through holes. Plus, they can also be used with non-Wolf Tooth branded single chainrings and those with a 110mm or 130mm bolt circle diameter (BCD).Wolf Tooth designed these bolts to be the best on the market. These single chainring optimised bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut, so no spanner is needed. These are 6mm long, so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.Features:Material: 7075-T6 AluminiumSize: M8 x.75 x 5Torque Spec: 7-8 NM tightening torque with light grease on threads onlyCompatibility: Wolf Tooth bolt-on Drop-Stop chainrings with through holes, works with other brand's single chainrings as wellBolt Circle Diameter (BCD) Compatibility: 110mm or 130mmMade in the USAPart Numbers: Black: WT5CBCN06BLK; Blue: WT5CBCN06BLU; Gold: WT5CBCN06GLD; Green: WT5CBCN06GRN; Grey: WT5CBCN06GRY; Orange: WT5CBCN06ORG; Purple: WT5CBCN06PRP; Red: WT5CBCN06RED; Silver: WT5CBCN06SILWeight: 10gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor Storm HC, 6 hole with 6 steel mounting bolts (1 pc) Specification:The Storm HC rotor is designed for extreme use and provides best braking performance even under large braking forces,Hole pattern: 6 hole,6 steel mounting screws included,Compatible with: complete MT-Family.
The TA ultra-torque chainrings are for use with Campagnolo ultra-torque cranksets only. Made from 7075 T6 aluminium the bolts are lightweight and have have a great resistance.Includes: Set of 4 UTC3 bolts, 4 UTC3 nuts and 1 shouldered UTC3 bolt.
Avid G3 Clean Sweep RotorVarying cutout sizes and shapes vastly improve heat dissipation, which in turn greatly reduces heating of the brake fluid creating a consistent braking feel. It also sheds approximately 10g over the G2 Clean Sweep rotor design. Features: Compatible with: Avid Elixir disc brakes. Mount: 6 bolt.Buy Avid Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Bracket Mounting Bolts - Titainium T25 (2 Pcs) - Flat Mount Caliper
Our very own range of Titanium products now available at Source BMX. Helping to keep the weight of your bike down to a minimum the Source BMX Titanium Female Flush Button Hub Bolts are made from high-quality grade 5 titanium with an average 40% weight saving when compared to the steel alternative. These hub bolts will fit all female hubs that use a 3/8” x 24tpi thread bolt. With a super flush design with 8mm allen key they are the perfect choice for riders who ride no pegs and want the cleanest looking bike! When installing these on your bike please use adequate lubrication or anti-seize to prevent corrosion, seizing or cold welding. Weight per pair: 46g Sold in pairs
Our very own range of Titanium products now available at Source BMX. Helping to keep the weight of your bike down to a minimum the Source BMX Titanium 17mm Female Hex Hub Bolts are made from high-quality grade 5 titanium with an average 40% weight saving when compared to the steel alternative. These hub bolts will fit all female hubs that use a 3/8” x 24tpi thread bolt, with a 17mm hex head, 6mm allen key option and 35mm long. When installing these on your bike please use adequate lubrication or anti-seize to prevent corrosion, seizing or cold welding. Weight per pair: 35g
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 5)With their tough aluminium construction, this pack of aluminium chainring bolts and nuts is a great upgrade to replace your old or lost parts and to breathe new life back into your setup. They're are suitable for use on Wolf Tooth bolt-on Drop-Stop chainrings with through holes. Plus, they can also be used with non-Wolf Tooth branded single chainrings and those with a 110mm or 130mm bolt circle diameter (BCD).Wolf Tooth designed these bolts to be the best on the market. These single chainring optimised bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut, so no spanner is needed. These are 6mm long, so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.Features:Material: 7075-T6 AluminiumSize: M8 x.75 x 5Torque Spec: 7-8 NM tightening torque with light grease on threads onlyCompatibility: Wolf Tooth bolt-on Drop-Stop chainrings with through holes, works with other brand's single chainrings as wellBolt Circle Diameter (BCD) Compatibility: 110mm or 130mmMade in the USAPart Numbers: Black: WT5CBCN06BLK; Blue: WT5CBCN06BLU; Gold: WT5CBCN06GLD; Green: WT5CBCN06GRN; Grey: WT5CBCN06GRY; Orange: WT5CBCN06ORG; Purple: WT5CBCN06PRP; Red: WT5CBCN06RED; Silver: WT5CBCN06SILWeight: 10gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Machined From 7075-t6 Aluminium At Wolf Tooth's Hq In Minneapolis, Usa, These 1x Chainring Bolts Are Beautifully Crafted To Top-tier Standards. If You're Looking To Adorn Your Bike With Precision Engineered Components Down To Even The Finest Details, These Are An Ideal Choice.
B-RAD Titanium Bolts are replacement bolts for use with B-RAD bases and mounts. Titanium is known for its high strength-to-weight ratio and corrosion resistance. These bolts are ideal for cyclists who carry cargo on their rides. Use these bolts as an upgrade for the stainless steel bolts that are included with B-RAD bases and mounts.Key FeaturesCompatible with Wolf Tooth B-RAD bases and mounts,Compatible with bikes with standard water bottle cage braze-ons,Max torque: 6 Nm,Wolf Tooth recommends applying a small amount of copper grease to threads before installing.
The Burgtec Direct Mount Stem Spacer is a no fuss mod for racers who want to lift the front end of the DH bike. Perfect for steeper tracks the Spacer allows you to adjust the height of your front end by sitting between your stem and crown.Fits BoXXers, Fox 40, DVO, Manitou, Marzocchi any other forks that use IS mountOnly available in 5mm stack heightWeight 15 gramsColour Burgtec BlackIncludes bolts
Coming as a pack of three bolts, these are a genuine replacement for the original ones that came on your bike. Designed to hold your rear shock firmly in place on your NS Bikes Define mountain bike (MTB). Genuine NS Bikes replacement parts. Manufacturer's Part Number: NSP-3860 Multi Rainbow 3 pcs