There are thrills to be had when you're riding on the limit, pushing your skills, concentration and equipment to the edge. But when you step over the limit and you get caught up in a crash the Baseframe Pro D3O Vest brings you a high degree of flexible protection across the chest and back. The chest gets treated to CE EN1621-1 level protection via D3O® armour while the back insert, also using D3O®, is rated to CE EN1621-2 level 2. When you're on the bike and shredding the D3O® is soft and flexible, allowing unhindered movement. However, in the event of a crash and ground impacts, the armour stiffens to absorb harmful forces upon the body. With all this protection you may think you'll feel restricted. But not a bit of it. The armour conforms to your body, leaving you fully mobile as you whip tabletops and navigate steep rocky trails. The form-fitting body is also quick-wicking and breathable, giving comfort during even the rowdiest of rides. Open mesh zones also add extra ventilation to keep you cooler while spacer mesh under both the chest and back guards provides comfort and extra moisture control. All the armour is removable too, letting you wash your vest and keep everything fresh and clean for your next shred session.
The Raceframe Impact D3O Chest Protector provides low-profile and flexible protection for mountain biking. To the front, a removable chest plate protects your chest and abdomen should you crash face first. The back, meanwhile, benefits from the use of impact-absorbing D30 Armour. When you're on your bike and shredding it offers superb flexibility but upon impact stiffens to absorb the damaging forces of a crash. When it comes to fit, the RaceFrame has a bonded construction and sleek design, suitable to be worn both under or over your MTB jersey. The articulated 'Rider Attack Position (RAP)™' design is honed for the demands of mountain biking. And with adjustability at the shoulders and waist, you'll always be able to dial in the perfect fit.
Combining minimal padding with unrivalled flexibility, the POC VPD Air + Tee combines protection and comfort for an offroad creation destined for greatness. Allowing for freedom of movement in the chest and elbow regions, the flexible mesh is extremely lightweight and highly breathable to ensure you stay cool from the first pedal until the last. The back protector is ventilated to reduce the build-up of sweat and sports impressive shock absorption levels to ensure an unexpected fall doesn’t do damage. Fitting perfectly to your upper body thanks to the elastic mesh, the VPD Air+ Tee has low-profile sleeve and chest comfort pads. For those searching for a customisable fit, the optional waist strap allows you to personalise your comfort easily. With comfort, compression and ventilation all working hand-in-hand to provide one of the finest forms of protection the trail has seen, even the roughest riding conditions don’t stand a chance of ruining your session.
This 11 speed free hub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. For more information on identifying hub model years, please see our hub timeline. Check that your hub has a black end cap before using this free hub. Use the spacer for compatibilty with 10 speed Shimano and SRAM drivetrains after installation.The red free hub is designed for SRAM or Shimano® drivetrains and includes a spacer for 10-speed compatibility. (This is NOT a Complete Conversion Kit for 10 Speed Wheels)
The Rival Pro Tee features a lightweight but shock-absorbing Auxagon back protector. This provides CE EN 1621.2 Level 2 protection, protecting you from hard impacts should you push skills too far, and yet won't restrict your movement. It also keeps weight and bulk to a minimum, and also allows sweat to escape, preventing clamminess after rowdy ride sessions. The auxetic protectors also extend to the shoulders, chest and false ribs for coverage of the most impact-prone areas. The jersey is virtually imperceptible and entirely concealed under an outfit due to its form-fitting shape and the minimalist design of its protectors. The long cut allows it to be worn comfortably inside pants or shorts, ensuring maximum stability of the protection during every phase of activity. Simple and immediate to wear, a practical side zipper allows the wearer to get it on and off with real ease, even when sweaty after a phase of intense activity.
Fully articulated to provide complete freedom of movement while still keeping you safe, the Body Protector 5.5 from Leatt is there for you whenever you need it. It’s all held in place by a mesh construction, which is also fully perforated to keep things breathable for cool comfort on the trail. The 5.5 edition of the Leatt Body Protector has been refined following years of experience at the brand’s lab in South Africa. Here Dr. Leatt and his team of engineers and designers conceptualize and test new products and constantly strive to improve existing products even further. The facility features state-of-the-art testing and prototyping equipment that enables the team to take a product from conceptualization, through testing, all the way to pre-production prototypes, and it shows every time you use one of their products. The addition of a kidney belt adds even more protection, and it can be fully adjusted to fit your own individual height. Leatt really have done it again, and it’s time you found out just how safe you can feel as you’re shredding things up. It also works perfectly with any Leatt brace on the market.
Leatt Body Protector 5.5 The ultimate protector in LEATT's Protection line. The BODY PROTECTOR features near 360° of plating and armor with the added benefits of a kidney belt and perfectly integrating with any Leatt-Brace.LEATT's patent pending BraceOn strap systems holds the neck brace to the body protector, yet allows them to move independently. Comfortable, free flowing mesh body holds the armor plates where they are needed most.Features: Designed to fit perfectly with any Leatt-Brace Shoulder and elbow guards meet CE safety approval EN 1621-1 Back protector meets CE safety approval EN 1621-2, Level 2 Front of protector meets the new CE safety approval EN 1621-3, Level 2 Uses high-tech SAS-TEC impact absorbing material in the front- and back protector Fully articulating back protector plates are comfortable and allow a great range of movement Cool, comfortable and breathable mesh body holds armor in place Zip-off sleeves allows rider to remove lower arm/elbow guards Removable kidney belt can be adjusted in height for individual fit Worn under shirt S/M size fits riders approx. 40-60kg (90-130lbS) and 160 to 172cm (5' 3” to 5' 7.5”) tall L/XL size fits riders approx. 55-85kg (120-190lbS) and 172 to 184cm (5' 7.5” to 6') tall XXL size fits riders approx. 80-110kg (180-240lbS) and 184 to 196cm (6' to 6' 5”) tallBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt Body Protector 5.5 The ultimate protector in LEATT's Protection line. The BODY PROTECTOR features near 360° of plating and armor with the added benefits of a kidney belt and perfectly integrating with any Leatt-Brace.LEATT's patent pending BraceOn strap systems holds the neck brace to the body protector, yet allows them to move independently. Comfortable, free flowing mesh body holds the armor plates where they are needed most.Features: Designed to fit perfectly with any Leatt-Brace Shoulder and elbow guards meet CE safety approval EN 1621-1 Back protector meets CE safety approval EN 1621-2, Level 2 Front of protector meets the new CE safety approval EN 1621-3, Level 2 Uses high-tech SAS-TEC impact absorbing material in the front- and back protector Fully articulating back protector plates are comfortable and allow a great range of movement Cool, comfortable and breathable mesh body holds armor in place Zip-off sleeves allows rider to remove lower arm/elbow guards Removable kidney belt can be adjusted in height for individual fit Worn under shirt S/M size fits riders approx. 40-60kg (90-130lbS) and 160 to 172cm (5' 3” to 5' 7.5”) tall L/XL size fits riders approx. 55-85kg (120-190lbS) and 172 to 184cm (5' 7.5” to 6') tall XXL size fits riders approx. 80-110kg (180-240lbS) and 184 to 196cm (6' to 6' 5”) tallBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Whether it's your neck, chest, back, flank or shoulder, the Fusion Vest 3.0 has you covered. It is a wonderfully powerful beast full of durable strength and protection, fitting underneath baggy jerseys to offer unrivalled coverage as you shred. Highly reinforced, it sports a 3D design that is both simple and effective while also making it incredibly easy to adjust your fitting to suit the way you ride. Fitting easily around the body, it utilises a hard body shell and absorbs high-impact energy to reduce blows delivered by unforgiving terrain. Designed to quickly stop and de-accelerate head-on impacts, Leatt’s advanced neck brace chassis technology is all you need and more to reduce the risk of injury. Not only does it absorb impacts and injuries but it transfers energy from the helmet to a reinforced part of the body, keeping you safe as you look to go again. The soft impact foam is both durable and cosy and the high-end performance capability of the vest is certain to inspire confidence morning, noon and night.
The Bodyfit Pro Bibtight provides maximum warmth and breathability through the careful selection of materials best suited to different parts of the body.Heavier brushed fabric is used in the front where you are most exposed to wind chill, while a medium weight fabric is used in the back for breathability. Sportful’s NoRain fabric is used on the shins to protect against road spray. All the materials are high-stretch to provide excellent freedom of movement.The tights use Sportful’s TC Pro seat pad. Using the same innovation as the Total Comfort seat pad, the TC Pro offers comfort for those cyclists who prefer slightly less padding and is ideal for multiday bike trips and pro racing. Key Features 4-needle stitching throughout for durability ,Double layer brushed fabric on knee and bib straps ,Made of heavier brushed fabric in front and medium weight fabric in back ,NoRain protection on shin ,YKK® ankle zip, with leg endings in water repellent fabric ,Back pocket on yoke ,Reflective detailing on ankle and front and rear ,TC Pro seat pad ,2°+ C ,Weight: 270g.
Certified to EN 1621-3 (chest) and EN 1621-2 (back), Level 1, the VPD System Tanktop is a highly capable protection system that also boasts incredible flexibility for comfort and easy movement when you're sending it down technical trails. Rather than encompass the protector into a jacket or vest, POC keeps it simple to enhance freedom of movement and airflow. The VPD material softens as it's warmed by your body heat, providing incredible flexibility but in the event that you take an impact it hardens to absorb the energy of the crash. Large ventilation channels front and rear let sweat escape and fresh air in, keeping your core temperature regulated. Flexible, lightweight chest and back protection for every trail ride. VPD Protection POC's VPD (Visco-Elastic Polymer Dough) has a decade of knowledge and progression behind it and when you're pushing hard on your bike then it's almost inevitable you'll fall. VDP lets you get up, again and again, no matter how many times gravity gets the better of you. Allowing complete freedom of movement, VPD is flexible protection with a shock absorbing inner layer matched to an abrasion resistant outer.
Designed for ultimate comfort and function, this super slim CE Certified Airflex body protector is lightweight and ideal for warmer days without compromising safety.Featuring level one back and shoulder protection as well as a chest pad, the Airflex Stealth Body Tee protector still fits nicely under t-shirt style jerseys and tops. The ergonomic fit is achieved thanks to high-tech Airflex technology. The vest has a full-length zip for easy fitting and Leatt neck brace ready straps on the shoulders.Key Features:Total Leatt® protection score of 9 points,AirFlex ventilated soft impact gel,Stealth, super slim fit,CE tested and certified as impact protection:,Back EN1621-2 Level 1,Shoulder EN1621-1,FFM-French Federation Certified,Anti-odor MoistureCool and AirMesh wicking fabrics,Our 3D design ensures a great fit that is very comfortable,Easy-to-wear, zip-up compression sock design for maximum evaporation,BraceOn™ neck brace fitting system,Easy to clean: hand wash,Weight: from TBA,Unisex fit: S-XXL - 160-196cm - 5ft3”-6ft 5”.