Hope Head Doctor Headset AdjustersIf you want your regular headset tightening and adjustments to be a thing of the past, then the Head Doctor is for you. Hope has made it from anodised aluminium with laser-etched graphics for a premium look. Its expander bung replaces the traditional "star nut" design for a safer hold with more even clamping force inside your fork’s steerer tube.When you install it, two aluminium wedges simply pull together and expand inside any 1.1/8 steerer giving you a solid thread to pull the stem down. Sounds simple? It is.Features: Material: Laser etched, anodised 2014 T6 Aluminium Expandable to 26.6mm Designed to fit 1 1/8" Aluminium steerer tubes only Compatible with most brands of 1.1/8" headsets Laser-etched top cap Even loading in steerer due to full diameter expander wedge Replaces "star nut" design Not suitable for Carbon or Steel steerer tubes Weight: 29gPlease Note: Before use, take apart and grease all of the internal threads and surfaces that have to slide against one another (NOT the surface that will touch the inside of the steerer), failure to do this will make it feel tight before it is. This makes it tempting to tighten even more and as this is a lightweight alloy bolt, it will snap if over tightened. Grease threads and surfaces and it will be fine.Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR V6 Flat PedalsBased on DMR's race proven V12 flat MTB pedals, the V6 model is made from a lightweight but durable Nylon and adopts the same narrow profile and concave shaping that DMR is renowned for. Also, for simplicity and to save weight, these flat mountain bike pedals rotate on a Dual DU bush internal system rather than internal bearings. Moulded pins complete these pedal's simple, high performing and maintenance-free design.Reasons to Buy:Race-proven design.Lightweight and durable Nylon construction.Narrow profile with concave shaping.High-performing and maintenance-free.Features:Material: NylonAxle: ChromolyAxle Size: Standard 9/16"" threadBearing Type: N/A pedal use DU (dry unlubricated) bushings insteadSpare Pins Included: N/A as pins are mouldedDual DU bush systemLightweight and durable Nylon construction.Narrow profile with concave shaping.Full length off-road pinsNon-serviceable designWeight: 327g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Funn Black Magic PedalsThese Black Magic Pedals from Funn feature a lightweight fibre glass reinforced thermoplastic body combined with durable metal pins. The pins and side caps can be customised to match the colours of your build. The Black Magic pedals spin on one bearing per side and the pair weighs in at an impressive 360 grams.Features: Material: Fibre Glass Reinforced Thermoplastic Axle System: Full cartridge CrMo axleWeight: 360g per pairBuy Funn Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR V-Twin Clipless Mountain Bike PedalsDesigned to tackle the toughest of mountain bike trails, these Clipless Mountain Bike Pedals from DMR are the most versatile caged-clip system out there, thanks to their durable aluminium construction and long-lasting Chromoly (CrMo) axle. Rider Optimised Mountain Bike Clipless PedalsThese mountain bike clipless pedals employ DMR's range of pins that are paired with a unique nylon bumper and metal shim. This allows the clipless pedal to be customised for optimal rider float preferences to improve your riding experience.Tough Mountain Bike Clipless PedalAn extruded and CNC machined custom DMR Alloy cage with fully sealed (fully serviceable) bearing system allow these V-Twin Clipless Pedals to take years of abuse in the toughest of situations whilst maintaining a low weight.Features:Nylon bumper designLarge platform areaShimano Pedalling Dynamics (SPD) compatible designAnodised coloured finishSteel sizing-shim set includedMaterial: Tough extruded aluminium body, CNC machinedAxle Material: Heavy-duty 4140 Chromoly (CrMo) steel axlesBearing Type: Serviceable bearing systemPins Included: 7 tuneable pins per side (full set supplied)Cleats Included: 5º float cleat set suppliedWeight: 546g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR V8 Pedals V2These Pedals from DMR feature the same concave design and high-quality construction that DMR is renowned for. The V2 version includes a wider platform area and a dual DU bushing system. Made from strong and durable Chromoly and die-cast aluminium body, they also feature 10 tuneable pins at either side, which can be tuned to adjust to your preferences. Features:Heavy-duty 4140 Chromoly (CrMo) axlesLarge platform areaUltra-low profileServiceable dual DU bush system10 tuneable pins per sideMaterial: Die-cast Aluminium bodyWeight: 480g per pairBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Pro Downhill Flat PedalsDesigned in collaboration with 5-time downhill world champion and three-time Enduro World Series Champion Sam Hill, Nukeproof brings you its Horizon Pro Flat Pedals. Precisely engineered, they give you the ideal balance of fatigue resistance and strength with a minimum weight penalty. These flat mountain bike pedals have a large platform with adjustable pins and angled edges to aid deflection from rock or root strikes.Prolonged Pedal LifeThe Horizon Pro has all the features found on the Horizon Sam Hill. Each pedal body spins on high-quality DU bushings with 2 sealed cartridge bearings to help spread the stress loads from heavy impacts. Meanwhile, a lip seal between the axle end and pedal body helps to reduce ingress of water and dirt prolonging pedal life between services. This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Material: Forged 6061-T6 Alloy body with CNC finishing Axle: Cro-Mo, standard 9/16" thread 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Adjustable pin heights Weight: 430gFlat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon CL CrMo Downhill PedalsTaking their design inspiration from the top-selling Horizon Pro flat mountain bike pedal, the Horizon CL downhill MTB pedals benefit from extensive engineering and pro-rider testing. This has resulted in outstanding durability, impact resistance, a low weight and excellent foot engagement. Now equipped with a performance-enhancing and easy to use SPD system, you’ll be pedalling more efficiently yet still be able to step off quickly.Designed With Pro-Rider FeedbackWith input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure you’re getting a platform that's designed to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Should you happen to prefer longer cleat bolts or simply want to fine-tune your riding experience, you can find the Long Nukeproof Cleat Bolts HERE This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Cold forged T1- 6061 alloy body with CNC finishing Tough and lightweight CrMo (Chromoly) axle Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Low profile contoured chassis with optimised leading edge Side Support Platform Dual Engagement Mechanism SPD compatible 9/16” axle Suitable for Multi twist cleats SPD Cleats included 57mm Crank arm to pedal centre Weight: 526gFlat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon CS CrMo Trail Flat MTB PedalsThe Nukeproof Horizon CS CroMoCrMo Pedals are the slightly smaller version of Nukeproof's the new SPD compatible range and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance and low weight. With design input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's built to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Should you happen to prefer longer cleat bolts or simply to fine-tune your riding experience, you can find the Long Nukeproof Cleat Bolts HERE This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Cold forged T1- 6061 alloy body with CNC finishing Tough and lightweight CrMo axle Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Low profile contoured chassis with optimised leading edge Side Support Platform Dual Engagement Mechanism SPD compatible Weight: 432gClipless Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Blackspire Nylotrax Flat Mountain Bike PedalsRunning on a combination of bushings and sealed cartridge bearings for ultimate durability, the Blackspire Nylotrax Flat Pedals feature an incredibly lightweight thermoplastic body. Maximum grip is ensured by the replaceable metal pins and the large platform provides plenty of support for comfortable pedalling.Features: Engineered thermoplastic body CNC-machined CrMo axle Size: 116x105mm Replaceable grip pins LSL bushing and sealed bearing Weight: 214g per pedalBuy Blackspire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Flip Pin Set for Vault Flat MTB PedalsThis handy DMR collection comprises of 44 steel Flippins for Vault Pedals.Features:16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure.28 x long pins (for use in the outside edge of your pedals) overall length 12.5mm, thread is M4x0.7x8, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. 2mm allen Wrench includedBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Vault V2 PedalsBuilding on the established design of it top-selling V8 and V12 models, DMR’s V2 Vault flat MTB pedals are ideal for everything from smashing down descents and climbing steep trail sections. With their tough CrMo (Chromoly) axles and extruded 6061 aluminium platforms, they are both durable and low in weight.Tough Downhill Flat PedalsThis tough construction means you can confidently take on the biggest jumps and be certain that pedals can withstand the landing. They also offer excellent grip, foot stability and clearance, thanks to the 11 pins per pedal, concave-shaped footbed and thin 17mm profile.Features: Material: Body: Extruded 6061 Aluminium; Axles: 4140 CrMo (Cromoly) Steel Size: 105x105mm with 17mm concave footbed Tuneable: 11 ‘flipPin’ per pedal can be fitted ‘short’ or ‘long’ to fine-tune the grip available Bearing Type: Cartridge bearings Serviceable: High load DU bush and cartridge bearing Axle Size: 9/16” Use: All Mountain, Enduro, Downhill Weight: 430g (Pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.