RockShox Pike RCT3 Solo Air ForkFeaturing robust 35mm aluminium upper stanchions, this mountain bike (MTB) suspension fork offers strong and durable steering performance as you charge from trail to trail at speed. RockShox has also kitted out this model with magnesium lower legs for increased stiffness, without adding any unnecessary excess weight. Benefitting from a lightweight Solo Air air spring, a highly adjustable RCT3 damper and disc brake compatibility, this MTB fork is all set for fast-paced trail riding.Solo AirSolo Air's enlightened design lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously. So, they’re always in perfect equilibrium, like Yin and Yang. Giving you a plush, predictable ride, you can set up in seconds, with the lightest weight air spring on the market.Charger RCT3 DamperPerformance-focused, benefits include no compromise for lockout. The efficiency circuits (Pedal and Lock) sit behind the performance damping, meaning no sacrifice in bump performance for shredding downhill while keeping the ability to maintain pedalling stability for those leg burning climbs, Rapid Recovery - More control with less energy. Bladder Charged, the extruded bladder design is insanely durable, resists damping change during extended downhills and has virtually zero pressure offset for small bump sensitivity. Trail Tuned, the RCT3 features Open with an adjustable low speed compression, Pedal and Lock.Features: Upper Stanchions Material: 35mm Aluminium Lower Legs Material: Magnesium Use: Mountain Bike (MTB) Steerer Diameter: 1 1/8-1.5" tapered Axle Size: 15x100mm Air Spring: Solo Air Damper: RCT3 (External rebound, low-speed compression, 3-position compression (Open/Pedal/Lock) Wheel Size: 27.5" Brake Type: Disc BrakeBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox Reba RL Solo Air QR ForkDesigned for MTB trail-riding, this suspension fork comes kitted out with strong 32mm straight wall aluminium upper stanchions for an excellent balance of stiffness and durability. RockShox has also equipped this model with magnesium lower legs and a forged hollow aluminium crown, which ensure maximum strength while keeping weight to a minimum.Solo AirSolo Air's enlightened design lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously. So, they're always in perfect equilibrium, like Yin and Yang. Giving you a plush, predictable ride, you can set up in seconds, with the lightest weight air spring on the market.RL DamperReady for hitting the trails, this model features an RL Damper that includes Rebound and Lockout. This makes it easy to dial in your favourite settings for a more rider-tuned feel as you carve your way around the mountain.Features: Upper Tubes Material: 32mm Straight Wall Aluminium Lower Legs Material: Magnesium Crown Material: Forged Hollow Aluminium Use: Mountain Bike (MTB) Steerer Diameter: 1 1/8-1.5" tapered Axle Size: 9mm Quick Release (QR) Air Spring: Solo Air Damper: RL (Rebound, Lockout) Brake Type: Disc BrakeBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox Yari RC Solo Air ForkThe RockShox Yari is a fork developed for those who know no boundaries. No matter what terrain lies ahead, the Yari RC can deal with everything you throw at it. Complete with confidence inspiring strength and stiffness, these RockShox Yari RC Solo Air Forks have the versatility of a trail fork as well as providing lower travel options. The RockShox Yari RC Solo Air Fork is responsive and stiff, making the Yari RC a great option for those looking for do-it-all trail forks.Solo AirThe Yari RC Solo Air Fork comes with a Solo Air air spring, which allows you to add air to your forks through a single Schrader valve. By filling both the positive and negative air spring chambers simultaneously, the fork delivers a plush, predictable ride.Motion Control DamperProviding seamless and effective performance, these suspension forks are equipped with a Motion Control damper. This means you'll benefit from a simple low-speed compression adjustment to lockout with external rebound adjustment. To top it off, you'll enjoy the freedom to ride in either a locked or open riding position to suit the terrain conditions.Features: Upper Stanchions Material: 35mm tapered wall Aluminium Use: Mountain Bike (MTB), Electric Mountain Bike (E-MTB) and Enduro Steerer Diameter: 1 1/8-1.5" tapered Axle Size: 15x100mm Air Spring: Solo Air Damper: Motion Control RC Brake Type: Disc BrakeBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox Reba RL Solo Air ForkDesigned for MTB trail-riding, this suspension fork comes kitted out with strong 32mm straight wall aluminium upper stanchions for an excellent balance of stiffness and durability. RockShox has also equipped this model with magnesium lower legs and a forged hollow aluminium crown, which ensure maximum strength while keeping weight to a minimum.Solo AirSolo Air's enlightened design lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously. So they're always in perfect equilibrium, like Yin and Yang. Giving you a plush, predictable ride you can set up in seconds, with the lightest weight air spring on the market.RL DamperReady for hitting the trails, this model features an RL Damper that includes Rebound and Lockout. This makes it easy to dial in your favourite settings for a more rider-tuned feel as you carve your way around the mountain.Features: Upper Tubes Material: 32mm Straight Wall Aluminium Lower Legs Material: Magnesium Crown Material: Forged Hollow Aluminium Use: Mountain Bike (MTB) Steerer Diameter: 1 1/8-1.5" tapered Axle Size: 15x100mm Air Spring: Solo Air Damper: RL (Rebound, Lockout) Brake Type: Disc BrakeBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cane Creek EE Regular Mount Plug (Pair)A high-quality genuine Cane Creek replacement plug set for EE Regular Mount brakes.Features: Genuine Cane Creek replacement plug set Suitable for EE Regular Mount brakes 1 pairBuy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DT Swiss HX 1501 Spline 30 Boost Rear WheelDesigned for riders who are looking for the ultimate performance. The rim is combined with a hub shell that offers better resistance to drive and braking torques that are common on modern E-MTBs. This resistance is made possible by reinforced spokes, so that even greater accelerations can be generated than with the previous DT Swiss hybrid product range. Each component has been carefully designed, produced and tested to ensure a stress-free ride as well as maximum fun, regardless of the rider's level. Suitable for both mountain bikes and electronic mountain bikes (E-MTBs), this is a perfect choice for tackling the demands of modern mountain riding.Aluminium MTB Rear Wheel with Tubeless Ready TechnologyTubeless tyres offer several distinct advantages over the traditional tyre and tube combination. The tyre can be run at lower pressures without risking "snakebites", thus providing more grip. The lower pressure also provides a more comfortable ride. The absence of the tube means that there is no friction between the tube and the tyre, and therefore less rolling resistance when riding off-road and over obstacles. This model is tubeless ready, so you can enjoy tubeless advantages such as the ability to run lower tyre pressures for increased stability, comfort and fewer chances of flats or punctures.DT Swiss Pro Lock TechnologyDT Pro Lock spoke nipples prevent the spoke-nipple connection from loosening on its own. A patented two-component adhesive is injected into the nipple thread, which allows the construction of an extremely durable rear wheel. As soon as the nipples are screwed in, the adhesive is activated and then hardens completely. Repeated re-centring is easily possible, although the adhesive strength decreases slightly with each re-centring.Ratchet EXP OSThe use of a single cylindrical spring results in less system wear while allowing faster full interlocking. With a full mesh of 30 teeth, the power generated by the engine and rider is transmitted evenly over a wide contact area, resulting in superior reliability. A larger double thread distributes loads over a wider area, reducing peak loads. This increases the service life of the system and even enables the transmission of greater torque. The axle was tested in FEM analyses to determine the bending load when riding an E-MTB and to optimise the axle resistance.Features: Material: Aluminium Use: Mountain Bike (MTB); Electric Mountain Bike (E-MTB) Axle Size: Rear: 12x148mm Boost Spokes: 28 DT Hybrid spokes Nipples: DT Pro Lock, Squorx Pro Head Hubs: DT Swiss 240 Freehub Type: SRAM XD Freehub System: Ratchet EXP OS 30 Size: 29" ETRTO: 30-622 ASTM Category: 4 Brake Type: Disc brake, 6-bolt Valve Hole Diameter: 6.5mm Rim Width: 35mm Inner Profile Width: 30mm Rim Profile Height: 25mm Single or Pair: Single, rear wheel Weight Limit: 140kgTechnologies: Optimised for use on E-MTBs. High-quality tubeless-ready aluminium rim. Reinforced DT Hybrid spokes for more lateral and torsional stiffness. Optimal power distribution for more robustness. Special hub body for improved durability. Ratchet EXP OS freewheel for maximum reliability.Manufacturer's Part Number: 89222966 29" SRAM XD 12x148mmBuy DT Swiss Swheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
DT Swiss HX 1501 Spline 30 Boost WheelsetDesigned for riders who are looking for the ultimate performance. Thanks to the aluminium rim, the DT Swiss HX 1501 Spline 30 Boost Wheelset is the top hybrid wheel in the DT Swiss range. The rim is combined with a hub shell that offers better resistance to drive and braking torques that are common on modern eMTBs. This resistance is made possible by reinforced spokes, so that even greater accelerations can be generated than with the previous DT Swiss hybrid product range. Each component has been carefully designed, produced and tested to ensure a stress-free ride as well as maximum fun, regardless of the rider's level. Suitable for both mountain bikes and electronic mountain bikes (E-MTBs), this is a perfect choice for tackling the demands of modern mountain riding.Aluminium MTB Wheelset with Tubeless Ready TechnologyTubeless tyres offer several distinct advantages over the traditional tyre and tube combination. The tyre can be run at lower pressures without risking "snakebites", thus providing more grip. The lower pressure also provides a more comfortable ride. The absence of the tube means that there is no friction between the tube and the tyre, and therefore less rolling resistance when riding off-road and over obstacles. This model is tubeless ready, so you can enjoy tubeless advantages such as the ability to run lower tyre pressures for increased stability, comfort and fewer chances of flats or punctures.DT Swiss Pro Lock TechnologyDT Pro Lock spoke nipples prevent the spoke-nipple connection from loosening on its own. A patented two-component adhesive is injected into the nipple thread, which allows the construction of extremely durable wheels. As soon as the nipples are screwed in, the adhesive is activated and then hardens completely. Repeated re-centring is easily possible, although the adhesive strength decreases slightly with each re-centring.Ratchet EXP OSThe use of a single cylindrical spring results in less system wear while allowing faster full interlocking. With a full mesh of 30 teeth, the power generated by the engine and rider is transmitted evenly over a wide contact area, resulting in superior reliability. A larger double thread distributes loads over a wider area, reducing peak loads. This increases the service life of the system and even enables the transmission of greater torque. The axle was tested in FEM analyses to determine the bending load when riding an E-MTB and to optimise the axle resistance.Features: Material: Aluminium Use: Mountain Bike (MTB); Electric Mountain Bike (E-MTB) Axle Size: Front: 15x110mm Boost; Rear: 12x148mm Boost Spokes: 28 DT Hybrid spokes Nipples: DT Pro Lock, Squorx Pro Head Hubs: DT Swiss 240 Freehub Type: SRAM XD Freehub System: Ratchet EXP OS 30 Size: 29" ETRTO: 30-622 ASTM Category: 4 Brake Type: Disc brake, 6-bolt Valve Hole Diameter: 6.5mm Rim Width: 35mm Inner Profile Width: 30mm Rim Profile Height: 25mm Single or Pair: Pair Weight Limit: 140kg Weight: 1929gTechnologies: Optimised for use on E-MTBs. High-quality tubeless-ready aluminium rim. Reinforced DT Hybrid spokes for more lateral and torsional stiffness. Optimal power distribution for more robustness. Special hub body for improved durability. Ratchet EXP OS freewheel for maximum reliability.Manufacturer's Part Number: 8922296589222960 29" SRAM XDBuy DT Swiss Swheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Muc-Off Tubeless Presta Valves (Pair)With each valve stem and cap made from aircraft-grade 7075 machined aluminium, these Presta valves provide excellent durability and strength on demanding terrains without adding any unnecessary excess grams to your ride. Muc-Off has also equipped these with an anodised finish for an additional layer of wear resistance and protection against corrosion during wetter riding conditions. Available in multiple size options for mountain bike (MTB), gravel and road cycling disciplines, these tubeless Presta valves are a perfect choice of upgrade for quick and easy inflation. Valve Core Removal Tool included.Boasting a unique Muc-Off design that's stronger and lighter than before, these Presta valves are also easier to use thanks to their machined six slot channel in the base. These slots allow your tyre to be inflated easier and can be used with most tubeless tyre foam inserts, allowing your tubeless sealant fluid and air to flow freely.Supplied with three sets of different shaped rubber inserts to fit a variety of rim shapes and create the perfect value to rim seal.Features: Valve Stem and Cap Material: Aircraft-grade 7075 machined Aluminium Finish: Anodised Use: Mountain Bike (MTB), Gravel and Road Included: Valve Core Removal Tool (integrated into spare alloy cap) Supplied with various rubber bases to optimise fit with multiple rim types 4mm machined Allen Key slot for easy installation/removal Suitable for Presta Valves only Unique Muc-Off designIn The Box: 2x 7075 Aluminium tubeless Presta valves 2x Valve caps 2x Locking nuts 1x Valve core removal tool (doubles as a spare valve cap) 3x Pairs of rubber bases for size choiceTechnologies: Tougher Than Ever: Made with 7075 aircraft-grade aluminium to be lighter and stronger to endure the harshest terrain. Tyre Insert Air Flow System: Featuring 6 slots machined into the base of the valve stem allowing them to be compatible with most tubeless tyre inserts and allow your tubeless sealant fluid and air to flow freely when running tubeless tyre inserts.Manufacturer's Part Numbers: 20420 Black 44mm 20430 Black 60mm 20421 Orange 44mm 20431 Orange 60mm 20422 Green 44mm 20432 Green 60mm 20423 Purple 44mm 20433 Purple 60mm 20424 Red 44mm 20434 Red 60mm 20425 Blue 44mm 20435 Blue 60mm 20426 Gold 44mm 20436 Gold 60mm 20427 Pink 44mm 20437 Pink 60mm 20428 Silver 44mm 20438 Silver 60mm 20429 Multi Iridescent 44mm 20439 Multi Iridescent 60mmBuy Muc-Off Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Muc-Off Tubeless Presta Valves (Pair)With each valve stem and cap made from aircraft-grade 7075 machined aluminium, these Presta valves provide excellent durability and strength on demanding terrains without adding any unnecessary excess grams to your ride. Muc-Off has also equipped these with an anodised finish for an additional layer of wear resistance and protection against corrosion during wetter riding conditions. Available in multiple size options for mountain bike (MTB), gravel and road cycling disciplines, these tubeless Presta valves are a perfect choice of upgrade for quick and easy inflation. Valve Core Removal Tool included.Boasting a unique Muc-Off design that's stronger and lighter than before, these Presta valves are also easier to use thanks to their machined six slot channel in the base. These slots allow your tyre to be inflated easier and can be used with most tubeless tyre foam inserts, allowing your tubeless sealant fluid and air to flow freely.Supplied with three sets of different shaped rubber inserts to fit a variety of rim shapes and create the perfect value to rim seal.Features: Valve Stem and Cap Material: Aircraft-grade 7075 machined Aluminium Finish: Anodised Use: Mountain Bike (MTB), Gravel and Road Included: Valve Core Removal Tool (integrated into spare alloy cap) Supplied with various rubber bases to optimise fit with multiple rim types 4mm machined Allen Key slot for easy installation/removal Suitable for Presta Valves only Unique Muc-Off designIn The Box: 2x 7075 Aluminium tubeless Presta valves 2x Valve caps 2x Locking nuts 1x Valve core removal tool (doubles as a spare valve cap) 3x Pairs of rubber bases for size choiceTechnologies: Tougher Than Ever: Made with 7075 aircraft-grade aluminium to be lighter and stronger to endure the harshest terrain. Tyre Insert Air Flow System: Featuring 6 slots machined into the base of the valve stem allowing them to be compatible with most tubeless tyre inserts and allow your tubeless sealant fluid and air to flow freely when running tubeless tyre inserts.Manufacturer's Part Numbers: 20420 Black 44mm 20430 Black 60mm 20421 Orange 44mm 20431 Orange 60mm 20422 Green 44mm 20432 Green 60mm 20423 Purple 44mm 20433 Purple 60mm 20424 Red 44mm 20434 Red 60mm 20425 Blue 44mm 20435 Blue 60mm 20426 Gold 44mm 20436 Gold 60mm 20427 Pink 44mm 20437 Pink 60mm 20428 Silver 44mm 20438 Silver 60mm 20429 Multi Iridescent 44mm 20439 Multi Iridescent 60mmBuy Muc-Off Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ODI AG-2 Aaron Gwin V2.1 Lock-On GripsThe ODI’s AG-2 Aaron Gwin V2.1 Lock-On Grips have built on their knowledge from previous collaborations with Downhill World Champions, to make these grips their best yet. Featuring a Soft Pro Compound that offers better grip and control whatever the weather and is extra soft for your hands. What's more, its knurled shape reduces vibration transfer, ensuring you enjoy a smoother ride whatever the trail. Impact DampeningThe AG-2 V2.1 grips also embrace ODI’s offset design that offers even more impact dampening at key grip points. Finally, the grip’s areas that are most prone to impact have been reshaped to give you more accurate control and a better feel in the hand.Features: Larger diameter than the original model Offset padding towards the rider for improved comfort Softer Compound - Soft Pro Compound provides excellent shock absorption A redesigned surface pattern for improved traction and vibration dampening Improved Ergonomics - Redesigned Ends provide an improved feel Aluminium Reinforced Ends for extra durability against grip blowout Angled Rib Pattern - Thin ribs add control without a bulky feel Single Clamp - Uses ODI's race-proven Version 2.1 Lock-On system Hard plastic end moulded over the aluminium endcap to provide durability but does not gougeBuy ODI Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
ODI AG-2 Aaron Gwin V2.1 Lock-On GripsThe ODI’s AG-2 Aaron Gwin V2.1 Lock-On Grips have built on their knowledge from previous collaborations with Downhill World Champions, to make these grips their best yet. Featuring a Soft Pro Compound that offers better grip and control whatever the weather and is extra soft for your hands. What's more, its knurled shape reduces vibration transfer, ensuring you enjoy a smoother ride whatever the trail. Impact DampeningThe AG-2 V2.1 grips also embrace ODI’s offset design that offers even more impact dampening at key grip points. Finally, the grip’s areas that are most prone to impact have been reshaped to give you more accurate control and a better feel in the hand.Features: Larger diameter than the original model Offset padding towards the rider for improved comfort Softer Compound - Soft Pro Compound provides excellent shock absorption A redesigned surface pattern for improved traction and vibration dampening Improved Ergonomics - Redesigned Ends provide an improved feel Aluminium Reinforced Ends for extra durability against grip blowout Angled Rib Pattern - Thin ribs add control without a bulky feel Single Clamp - Uses ODI's race-proven Version 2.1 Lock-On system Hard plastic end moulded over the aluminium endcap to provide durability but does not gougeBuy ODI Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
ODI Longneck SLX BMX Handlebar GripsReady for long sessions at the skatepark, these BMX grips offer fantastic strength, comfort and grip on the most demanding of rides. They feature a soft rubber compound, which makes them easy to grab as you nail your favourite tricks. Coming equipped with a classic mushroom style with collapsible rib pattern, these provide a supportive feel with every twist and turn. One final highlight is their flangeless design that includes push-in end plugs, so you have everything you need to complement your handlebar's finish. Features:Material: Soft Rubber CompoundUse: BMXStyle: Classic mushroom style with collapsible rib patternFlangeless: YesIncluded: Push-in end plugsSingle or Pair: PairBuy ODI Components from Chain Reaction Cycles, the World's Largest Online Bike Store.