Keeping your mind ticking over when you can't get a proper outdoor ride completed can have a detrimental impact on your training, so with the LifeLine Trainer Table, you can make sure that your indoor workout is a fun and comfortable as possible. Fully height adjustable up to 1.2metres, the table can be positioned to your optimum eye level as you burn through a virtual workout on your mobile phone or tablet, which is ably supported by either of the two recesses at the front and back of the tabletop. If you like to watch your workout stats (or favourite TV shows and movies) through your laptop instead of a mobile device, it can safely be set on the rubber non-slip mat that goes across the tabletop. Equipped with a pair of bottle holders on either side to ensure you are never dehydrated and caster wheels with foot-brakes for ultimate portability and stability in your garage or workout area, this handy and customisable addition to your indoor training set up will do all it can to help you break the boredom and get to the finish line.
LifeLine’s Bluetooth and ANT+ Compatible Heart Rate Monitor can easily be connected to a large range of devices and used with smartphone apps, watches, consoles, and other compatible receivers. The transmitter pod is incredibly lightweight and is integrated within a soft fabric body belt delivering maximum performance and comfort when worn around the chest. The belt can be adjusted to provide a large range of sizes and fit. Tech Specs Heart rate range: 30~230bpm Typical range: 30ft Storage temperature: -10 ~ 60°C Operating temperature: 0 ~ 50°C Average active current: typical 95uA at transmission intervals of 1s Flexible connection interval controlled by Host device (Min:0.3125sec, Max:2sec, default:1sec) Peak Active current: 10.5mA at Tx 0dBm Stand-by current: less than 2uA Battery level display: 100%, 80%, 60%, 40%, 20%, 0% Battery: CR2032 lithium cell (200mAh) Battery life: up to 900hrs use RF system: 2.4Ghz
Excellent quality replacement parts designed to fit BH90 hydraulic brake hose.
Each pack contains 3 x 400mm tubes. Two diameters are available, 5mm inner/ 8mm outer and 6mm inner/ 11mm outer.
Feed the guide cable through your frame using the magnet on your multi tool and the magnet on the guide cable to pass from exit to insert point. Then attach the correct asaptor from the multi tool to your cable that requires routing. Attach the magnet adaptor to this cable and connect the guide cable to the routing cable. Then simply drag the routing cable back through the frame by pulling on the guide cable. Sound tricky? It's really not. Check out the instructions added to the images and soon we'll make a video demonstrating how to use the tool!
The Lifeline brake hose kits are replacement kits for hydraulic brakes. Choose the kit you require depending on the brake that you have. All hoses are constructed from a high tenacity braided yarn. There are several options to choose from the menu for this brake hose kit. Please see the below details for more information on each kit: Spec 1- Shimano Straight- Straight Kit- road bikes and entry level MTB with Shimano brakes. 3M x Black Hose- ID=2.1mm/ OD= 5mm 2 x M9 Flange Nuts (for road lever) 2 x M8x0.75 Stainless Nuts (MTB lever end or Road caliper end) 2 x M8x0.75 Forged Nuts 4 x Stainless Inserts 4 x Copper Olive Spec 2- Shimano Straight- 90 Degree Kit- regular MTB bikes with Shimano brakes. 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Copper Olive Spec 3- Avid/SRAM Straight- 90 Degree Kit- Fitment for SRAM Guide Ultimate fitment and Level (remove banjos) 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded Olives Spec 4- Avid/SRAM Straight- Straight Kit- Fitment for SRAM Guide R, RS, RSC 1.8M x Black Hose with M6 male adapter pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with male adapter pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded Olives Spec 5- Avid/SRAM Straight- 90 Deg Kit MONOBLOCK- Fitment for SRAM Code, Red & Force 1.8M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Alloy Threaded Olives Spec 6- Tektro Straight- Straight Kit 1.8M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 1M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 2 x M8x0.75 Forged Nuts 2 x Copper Inserts 2 x Copper Olives
This 12 piece kit contains four copper olives, four inserts/barbs and four steel nuts. The inserts/barbs are designed to fit 2.5mm inner diameter hose for Tektro brakes. The olives are designed to fit 5.5mm outer diameter hose and the nuts are M8 x 0.75mm for 5.5mm outer diameter hose. Manufacturer's Part Number: LL-TUOIN Gold 12 Piece
The plywood top has a tasteful natural finish and anti-slip matting for your devices. The table comes fitted with a 3-metre extension cable and universal socket, plus 2 x USB 2.0 slots. Keeping your mind ticking over when you can't get a proper outdoor ride completed can have a detrimental impact on your training, so with the LifeLine Pro Trainer Table, you can make sure that your indoor workout is as fun and as comfortable as possible. Fully height adjustable up to 1.27metres, the table can be positioned to your optimum eye level as you burn through a virtual workout on your mobile phone or tablet, which is ably supported by either of the two recesses at the front and back of the tabletop. If you like to watch your workout stats (or favourite TV shows and movies) through your laptop instead of a mobile device, it can safely be set on the rubber non-slip mat that goes across the tabletop. Equipped with a bottle holder you are never dehydrated and caster wheels with foot-brakes for ultimate portability and stability in your garage or workout area, this handy and customisable addition to your indoor training set up will do all it can to help you break the boredom and get to the finish line.
Semi transparent plastic allows you to check your levels and ensure a smooth bleed. The following brake models (but not limited to, please check your brakes maintenence guide): ST-R9120, ST-R9170, ST-R8020, ST-R8025, ST-R8070, ST-R7025, ST-R7020, ST-4725 and ST-4720, a funnel adapter is needed to reduce the larger thread size at the master cylinder in order to connect the bleed funnel. (sold seperatly)
Cable Housing and Hydraulic line hooks. 4 Pack.
Used to bleed SRAM Edge Brake systems
Compatible with both Road and MTB SRAM Avid Brake Systems.