The K-Edge chain catcher has been a popular piece of kit since the very first time it was used in the 2008 Olympic Games by Kristin Armstrong. The chain catcher was designed to keep the chain in place, improve shifting performance and protect the frame from damage caused by a derailed chain. The original chain catcher was introduced to the Pro peloton in 2009 and ever since then it has been a permanent fixture on many bikes in some of teh worlds biggest races. This new and updated Pro model does the same job as the original model but is easier to fit and allows for independent adjustment of the front mech and chain catcher.This model is compatible with double chainring Shimano, Campagnolo and SRAM derailleurs and comes complete with all mounting hardware and fits onto braze-on frame mounts. Made from 6061 T6 heat treated aluminium with a long-lasting protective anodised finish that only weights 15 grams. K-Edge products are proudly CNC machined in the USA and have a lifetime warranty.
A simple precision-made component that provides valuable insurance against front derailleur malfunctionsUsed to good effect by top professional riders in the Olympic games World Championships Tour de France Giro d'Italia Paris Roubaix and many moreIt acts a ramp to guide your chain and virtually eliminates the possibility of your chain dropping off the small chainring onto the bottom bracket helping to protect your frame and keep you in gearHighly recommended to prevent structural damage to carbon and aluminium frames but also protects the finish of any other frame materialComplete with all mounting hardware and longer bolts for Shimano Campagnolo and SRAM derailleurs including a radius washer with a secure mounting interface for effective performanceFits onto braze-on frame mounts or a clamp-on front derailleur mountDesigned to work with all double chainring bikesMade from 6061 T6 heat treated aluminiumFinished with a wet-look powdercoat paintAdds only 10 grams of weightK-Edge products are proudly CNC machined in the USA and have a Lifetime warranty: you break it well replace it
The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming.
The Lower Dual Gyro Cable from Kink is a true one-size-fits-all solution to Gyro cables with it's unique lug design. It features three sets of brake cable end lugs that can be trimmed off after you've got the correct cable length. The Kink Cable system fits with all 990 style brakes and frames, fitting most popular Gyro systems too. The dual cable stop plate bolts cleanly to existing frame cable stops, for perfect, tidy cable routing.
The Kink Upper Gyro cables are a uniquely designed dual cable system, and are available in two lengths to work with Kink specific brake levers or the universal size to fit most other popular brake levers. The two ultra smooth pre-stretched inner wires are combined into a single casted lever lug, which brings the smoothness and stiffness of the dual cable system to traditional brake levers without any protruding parts.
Velcro cable strap from Kink, Reusable for when you need to replace or remove your cable.
KMC's MissingLinks are easy to mount and 100% reliable. To connect your chain by using a MissingLink, you do not need complicated and expensive tools. The KMC 10NR MissingLink is compatible with KMC, Shimano, Campagnolo and SRAM 10-speed chains. The chain links cannot be reused and are sold as a card of two pieces.
KMC's MissingLinks are easy to mount and 100% reliable. To connect your chain by using a MissingLink, you do not need complicated and expensive tools. The KMC 10R MissingLink has a pin length of 5.88mm and is compatible with KMC, Shimano, Campagnolo and SRAM 10-speed chains. The chain links can be reused and are sold as a card of two pieces.
KMC's MissingLinks are easy to mount and 100% reliable. To connect your chain by using a MissingLink, you do not need complicated and expensive tools. The KMC 10R MissingLink has a pin length of 5.88mm and is compatible with KMC, Shimano, Campagnolo and SRAM 10-speed chains. The chain links can be reused and are sold as a card of two pieces.
KMC's MissingLinks are easy to mount and 100% reliable. To connect your chain by using a MissingLink, you do not need complicated and expensive tools. The KMC 11R MissingLink has a pin length of 5.65mm and is compatible with KMC, Shimano, Campagnolo and SRAM 11-speed chains. The chain links can be reused and are sold as a card of two pieces.
KMC's MissingLinks are easy to mount and 100% reliable. To connect your chain by using a MissingLink, you do not need complicated and expensive tools. The KMC 11R MissingLink has a pin length of 5.65mm and is compatible with KMC, Shimano, Campagnolo and SRAM 11-speed chains. The chain links can be reused and are sold as a card of two pieces.