Wolf Tooth Direct Mount Roadlink Derailleur HangerEnabling you to run larger range cassettes on your road or gravel bike, this direct mount (DM) version of Wolf Tooth's RoadLink Derailleur Hanger extension works with a wide range of Shimano 11 speed rear mechanisms. It’s the ideal adaptor for changing the gearing on your bike to a 1x11 speed drivetrain setup.This gear hanger extension fits Shimano’s GRX 810 (RX810), R7000 105, R8000 and RX800 Ultegra and R9100 Dura-Ace rear derailleurs. Since it was first introduced, this award-winning model has given riders the ability to easily increase the range of their Shimano road bike drivetrains, while also maintaining near-factory levels of chain wrap and shifting operation.Like the mountain-focused GoatLink, the RoadLink DM replaces Shimano’s stock direct mount link allowing you to relocate the derailleur to provide clearance for larger-than-stock range cassettes while maintaining chain wrap and improving shifting. The result - larger gear ranges that riders want and expect for their road, commuter, gravel and touring bicycles.Features:Material: CNC machined from 6061-T6 Aluminium with stainless steel boltMount: Direct mountCompatibility: Shimano GRX 810 (RX810), 105 R7000, Ultegra R8000 and RX800 and Dura-Ace R9100 rear derailleursFits standard derailleur hangers onlyOptimised for use with 11-36T, 11-40T, and 11-42T 11-Speed cassettesOptimised for use with GRX ultra-wide range drivetrains when using the GRX 810 (RX810) rear derailleurImproves performance with 10-42T 11-Speed cassettes, but not to factory levelsDoes not change the derailleurs total chain wrap capacityMade in the USAManufacturer’s Part Number: WTROADLINK-DMWeight: 20gPlease Note: Direct mount derailleur hangers are not supported. These are not common and the stock B-Link that the RoadLink DM replaces will not be present on bikes with a direct mount derailleur hanger.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Roadlink Derailleur HangerCreated by Wolftooth to increase the gearing capacity of your road or gravel bike, the Roadlink Derailleur Hanger changes the position of your rear mechanism so it can work with larger mountain bike (MTB) cassettes. An ideal component for changing to a 1x drivetrain, it works with Shimano 10 and 11 speed derailleurs.If you're looking for the simplicity of a single chainring up front or even just want lower bail-out gears on your double without changing your existing groupset or losing shifting performance and chain wrap, then the RoadLink is for you. The RoadLink is optimised for use with 10 or 11 speed 11-36T and 11-40T cassettes, Shimano road derailleurs and is best paired with Wolf Tooth's 40-tooth GC cassette extenders and Drop-Stop chainrings. The RoadLink specifically designed for the 10 and 11 speed Shimano road derailleur geometry. It also works very well with 9-speed road groups, all SRAM groups and Campagnolo derailleurs with cassettes up to 11-36T.Features: Material: 6061 Aluminium Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10 and 11-Speed Use: Road, Gravel, cyclocross (CX) Direct Mount-native frames are not supported Triple chainrings are not supported Double chainrings are only supported with GS (medium cage) rear derailleurs. You may need to change the front gearing so the capacity of the rear derailleur is not exceeded Made in the USA Manufacturer's Part Number: WTRLINK Weight: 17g10-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainrings sure to not exceed the derailleur's capacity) 11-42T: Not supported11-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-42T: Not supported 10-42T: Not supportedPlease Note: Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially for rough or off-road use. Please Also Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment and suspension configuration, individual results will vary. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Tanpan Shimano AdaptorOffering the potential of a greater gear range and superior chain security, this adaptor enables you to run 10 speed Shimano MTB rear derailleurs with your 10 speed road shifters. This makes it ideal for riders who want to convert their drop bar set up to 1x. It works by amplifying your road shifter cable pull, giving you the potential to run a mountain bike rear derailleur. If you're looking to run a single chainring up front but with the gear range of a double - or want to retain a double and run super-low gears for ultra-steep hill mountain climbs, this is the upgrade for you.Easily installed in minutes and simply tucking above your rear derailleur, the Tanpan can be adjusted with its indexed barrel.CompatibilityCompatible with a wide range of road, gravel and cyclocross bikes.If your rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle, you will need to use the inline version. This is because the Tanpan barrel adjuster end sits too close to the frame for the internally routed cable to exit the frame and enter the Tanpan barrel adjuster.Features: Use: MTB, Road, Gravel and Cyclocross Speed: Multiple options available to select separately Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 11 Speed GoatLink Derailleur HangerIf you want better shifting performance when running larger cassettes with your Shimano SLX, XT OR XTR 11 speed rear derailleur, then the GoatLink Derailleur Hanger from Wolf Tooth is for you. An ideal addition to your 1x11 drivetrain, it will help your mountain bike (MTB) to deliver the clean shifting and power delivery you need for taking on the most technical sections of the trails.This project began with the desire to run 11 Speed Shimano derailleurs and shifters with SRAM 10-42T XD cassettes. Granted the combination can work without modification - but the performance wasn't quite what Wolf Tooth expected from Shimano and SRAM's finest.When used with a 10-42T cassette, the GoatLink 11 re-positions SLX M7000, XT M8000 and XTR M9000 rear derailleurs such that free chain length between the cassette and the top derailleur pulley is within 1% of what Shimano intended while cassette tooth engagement in the smallest cog is improved by 27%.*Knowing that certain situations call for a range beyond that provided 10-42T or 11-42T cassettes, Wolf Tooth tweaked the GoatLink 11 to also significantly improve Shimano 11 speed rear derailleur performance with extended-range like the Wolf Tooth GCX44 modified 10-44T XX1 or X01 cassette.Features:Material: 6061 AluminiumCompatibility: SLX M700, XT M8000 and XTR M9000 series 11-Speed Shimano rear derailleursSpeed: 11-SpeedIncluded: Stainless Steel boltTorque: 8-10NmMade in the USAOnly mounts to standard derailleur hangersDouble chainrings (2x) are supported and require a long cage (SGS) rear derailleur with no more than a 12T difference in front chainrings (with an 11-46T cassette)Triple chainrings are not supportedDirect Mount native frames and SRAM derailleurs are not supportedManufacturer's Part Number: WT11S44GLINKWeight: 19g*Please Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 10 Speed GoatLink Derailleur HangerIf you want to add extra capacity to your Shimano Shadow+ rear mechanism for the ultimate 1x10 speed setup, the Goatlink adaptor is for you. With this carefully machined component installed on your Shimano-equipped mountain bike (MTB), you’ll enjoy better shifting performance and be able to run Wolf Tooth’s Giant Cog (GC) cassette expanders and other brands of larger cassettes.The GoatLink is simply the fastest route to improved wear and long-term shifting performance on wide-range 1x10 drivetrains using the Shimano Shadow+ Rear derailleurs. Made by Lindarets and Wolf Tooth, it re-positions 10-speed Shimano Shadow+ Rear derailleurs to the optimal location when using the GC 40 tooth and GC 42 tooth sprockets.Features: Material: 6061 Aluminium Compatibility: Shimano Shadow+ 10-Speed rear derailleurs (clutch-type only) Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10-Speed Optimised for Wolf Tooth's 40 and 42-tooth GCs and all sizes of Drop-Stop chainrings - but will work with any 11-40T or 11-42T 10-Speed cassette You will never need a longer b-screw with the GoatLink Made in the USA Direct Mount-native frames and SRAM rear derailleurs are not supported Part Numbers: WT10SGLINK Weight: 19g Please Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.Please Also Note: Compatible Shimano Shadow+ 10-speed rear derailleurs (clutch-type only) that have a Direct Mount link (including spacer, if so equipped) or B-pivot knuckle with a thickness of 7.9-8.1mm. Shimano changed to this sometime in 2013. Very early Shadow+ rear derailleurs have a thinner link and are not compatible. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Seatpost ClampWith its high-quality CNC machined construction and anodised finish, this tough and lightweight seatpost clamp gives that premium touch to finish of your bike. Available in a range of colours to match your frame or components colour scheme, it has Wolftooth’s self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.Features: Material: CNC Machined 6061 Aluminium Clamp Height: 11mm Not compatible with Ibis brand bike framesPlease Note: The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth EnCase Chainbreak Tyre Plug ToolThe EnCase Chainbreak Tyre Plug Tool is a versatile and durable tool that features a chainbreaker and a tyre plug tool. Plus, this tool is compatible with the EnCase system, this meaning you can store it in your bike handlebars.Durable, Convenient and Low-Profile Tool StorageFix tubeless tyres and broken chains. This multi-tool has a chain tool on one end and a tyre plug built into the handle, with inner storage for tubeless tyre plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. Features: Material: 7075-T6 Aluminium, Chromoly (CrMo) steel, butyl strips Compatible with all bicycle chains, including 12-speed Inserter tool and bacon strips plug holes in tubeless tyres Five bacon strip tyre plugs included; refills available (EnCase System Extras) Hardened steel chain pin driver for lifetime durability Store in handlebar with EnCase System Storage Sleeves (sold separately) or carry in a jersey pocket Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench Multi-Tool) Compact design of the chain tool is for removal of chain pins only. Always carry a spare master link for chain repair Fits most mountain handlebars and road handlebars when combined with the storage sleeve. Works with both carbon and aluminum handlebars. Does not fit ergonomic-style road bars with extra bends in the drops. Minimum internal bar diameter is 17.5mm Known incompatible handlebars: Syntace Vector, Diety Skywire, Jones H-Bar Loop SG 2.5, Chromag BZA, Chromag Cutlass, BMC RCB01, S-Works Hover Carbon Weight: 46gBuy Wolf Tooth Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 8-Bit Pack Pliers Multi ToolThe 8-Bit Pack Pliers from Wolf Tooth are a unique-styled lightweight, durable and convenient plier set with 17-functions. It includes a spoke wrench, valve core wrench, screwdrivers with multiple bits, an 8mm Hex and T10 and T25 Torx compatible bits. Plus, it features magnets to keep all the tool and tool-bits in place during use and when in storage.Lightweight, Durable and Convenient Multi-ToolThe 8-Bit Pack Pliers is a lightweight multi-tool with 17 functions. Eight attachments nest inside the handles of master link pliers using magnets and a clever storage system. These attachments then fit into an 8mm ball detent swivel head that has a 4mm opening for hex bits, which adds functionality to the already-versatile master link pliers. This new multi-tool was created to solve almost any minor repair on mountain bike (MTB) and road rides alike. Features: 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tyre sealant clogs from valve stem; tighten valve stem lock nut Magnets keep all bits in place Ball detent swivel head helps access hard-to-reach places Handle doubles as breaker bar for extra torque when head is bent 8mm hex bit tested to over 40 Nm torqueCompatibility: Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)Specifications: Material: 7075-T6 Aluminium handles, CrV tool steel swivel head, S2 tool steel bits Size: 146mm x 20mm x 9mm Master links are not included Patent Pending Made in the USA Weight: 68gBuy Wolf Tooth Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 8-Bit Pack Pliers Multi ToolThe 8-Bit Pack Pliers from Wolf Tooth are a unique-styled lightweight, durable and convenient plier set with 17-functions. It includes a spoke wrench, valve core wrench, screwdrivers with multiple bits, an 8mm Hex and T10 and T25 Torx compatible bits. Plus, it features magnets to keep all the tool and tool-bits in place during use and when in storage.Lightweight, Durable and Convenient Multi-ToolThe 8-Bit Pack Pliers is a lightweight multi-tool with 17 functions. Eight attachments nest inside the handles of master link pliers using magnets and a clever storage system. These attachments then fit into an 8mm ball detent swivel head that has a 4mm opening for hex bits, which adds functionality to the already-versatile master link pliers. This new multi-tool was created to solve almost any minor repair on mountain bike (MTB) and road rides alike. Features: 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tyre sealant clogs from valve stem; tighten valve stem lock nut Magnets keep all bits in place Ball detent swivel head helps access hard-to-reach places Handle doubles as breaker bar for extra torque when head is bent 8mm hex bit tested to over 40 Nm torqueCompatibility: Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)Specifications: Material: 7075-T6 Aluminium handles, CrV tool steel swivel head, S2 tool steel bits Size: 146mm x 20mm x 9mm Master links are not included Patent Pending Made in the USA Weight: 68gBuy Wolf Tooth Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 8-Bit Pack Pliers Multi ToolThe 8-Bit Pack Pliers from Wolf Tooth are a unique-styled lightweight, durable and convenient plier set with 17-functions. It includes a spoke wrench, valve core wrench, screwdrivers with multiple bits, an 8mm Hex and T10 and T25 Torx compatible bits. Plus, it features magnets to keep all the tool and tool-bits in place during use and when in storage.Lightweight, Durable and Convenient Multi-ToolThe 8-Bit Pack Pliers is a lightweight multi-tool with 17 functions. Eight attachments nest inside the handles of master link pliers using magnets and a clever storage system. These attachments then fit into an 8mm ball detent swivel head that has a 4mm opening for hex bits, which adds functionality to the already-versatile master link pliers. This new multi-tool was created to solve almost any minor repair on mountain bike (MTB) and road rides alike. Features: 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tyre sealant clogs from valve stem; tighten valve stem lock nut Magnets keep all bits in place Ball detent swivel head helps access hard-to-reach places Handle doubles as breaker bar for extra torque when head is bent 8mm hex bit tested to over 40 Nm torqueCompatibility: Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)Specifications: Material: 7075-T6 Aluminium handles, CrV tool steel swivel head, S2 tool steel bits Size: 146mm x 20mm x 9mm Master links are not included Patent Pending Made in the USA Weight: 68gBuy Wolf Tooth Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth EnCase System Bar Tool KitThis handlebar tool kit offers in-bike storage as well as essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customisable rubber flap that can be cut to meet your handlebar's inner diameter.The EnCase System: Bar Kit One includes a Hex Bit Wrench Multi-tool, a Chain + Tyre Plug Multi-tool, and two Storage Sleeves.HEX BIT WRENCH MULTI-TOOL- 14 functions (spoke wrench for 0.127" (3.23mm) nipples; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx compatible)- Magnets & O-rings keep all parts in place- Ball detent swivel head helps access hard-to-reach places- Handle doubles as breaker bar for extra torque when tool head is bent - Store in handlebar with EnCase Storage Sleeve- Magnet on the bottom of tool for convenient storage on steel bike stands (or refrigerators)CHAIN + TYRE PLUG MULTI-TOOL- Compatible with all bicycle chains including 12 speed- Inserter tool and bacon strips plug holes in tubeless tyres- Five strips included; refills available (EnCase System Extras)- Hardened steel pin for lifetime durability- Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit WrenchSTORAGE SLEEVES- Vibration-damping material and snug fit prevents rattling- Durable precision-machined aluminium end caps- Custom fit rubber flap can be trimmed to fit in smaller diameter bars- Bonus storage space—fits a presta-to-schrader adapter and valve core or a master link (both sold separately)- Includes Drop Bar Fit Kit to customise fit for larger-diameter road handlebarsCompatibilityFits most mountain handlebars and road handlebars. Does not fit ergonomic-style road bars with extra bends in the dropsWorks with both carbon and aluminium handlebarsThe minimum internal bar diameter is 17.5mmKnown incompatible handlebars: Syntace Vector, Diety Skywire, Jones H-Bar Loop SG 2.5, Chromag BZA, BMC RCB01, S-Works Hover CarbonFeatures: Hex Bit Wrench Multi-Tool Material: 7075-T6 Aluminium, CrV Steel Chain + Tyre Plug Multi-Tool Material: 7075-T6 Aluminium, CrMo Steel, Butyl strips Storage Sleeves Material: EPDM Rubber, 6061-T6 Aluminium Handlebar compatibility: Fits most mountain handlebars and road handlebars. Does not fit ergonomic-style road bars with extra bends in the drops Minimum Internal Bar Diameter: 17.5mm Works with both carbon and aluminum handlebars Weight: Bar Kit One: 132g; Hex Bit Wrench Multi-tool: 98mm long 15mm diameter 50g; Chain + Tyre Plug Multi-tool: 102mm long, 15mm diameter 46g; Storage Sleeves: 36gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Ultralight Chain Whip ToolThis chain whip tool features a hard-wearing aluminium construction, which makes it perfect at preventing your cassette from turning as you untighten the lockring. Suitable for use on any cassette up to and including 12 speed cassettes, this tool is equipped with a handle length of 11 inches. This makes it easy to use as you carry out essential maintenance, plus it weighs only 170g, so it won't weigh you down on your travels.We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 5lbs of tools! To help with this we developed some very specific Pack Tools that are high quality but weight conscious for those that do mobile wrenching, traveling with their bike, or just want one set of tools that can be thrown in when heading to the trail. This lightweight chain whip is strong enough to be your go to chain whip, but light enough that you won't need to leave it at home when on the move.Features: Wrench Material: 7075-T6 Aluminium Dimensions: Handle length is 11 inches (28cm) Compatibility: Any cassette up to and including 12 speed cassettes Lightweight and practical chain whip Made in the USA Weight: 170gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.