Wolf Tooth Tanpan Shimano AdaptorOffering the potential of a greater gear range and superior chain security, this adaptor enables you to run 10 speed Shimano MTB rear derailleurs with your 10 speed road shifters. This makes it ideal for riders who want to convert their drop bar set up to 1x. It works by amplifying your road shifter cable pull, giving you the potential to run a mountain bike rear derailleur. If you're looking to run a single chainring up front but with the gear range of a double - or want to retain a double and run super-low gears for ultra-steep hill mountain climbs, this is the upgrade for you.Easily installed in minutes and simply tucking above your rear derailleur, the Tanpan can be adjusted with its indexed barrel.CompatibilityCompatible with a wide range of road, gravel and cyclocross bikes.If your rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle, you will need to use the inline version. This is because the Tanpan barrel adjuster end sits too close to the frame for the internally routed cable to exit the frame and enter the Tanpan barrel adjuster.Features: Use: MTB, Road, Gravel and Cyclocross Speed: Multiple options available to select separately Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Roadlink Derailleur HangerCreated by Wolftooth to increase the gearing capacity of your road or gravel bike, the Roadlink Derailleur Hanger changes the position of your rear mechanism so it can work with larger mountain bike (MTB) cassettes. An ideal component for changing to a 1x drivetrain, it works with Shimano 10 and 11 speed derailleurs.If you're looking for the simplicity of a single chainring up front or even just want lower bail-out gears on your double without changing your existing groupset or losing shifting performance and chain wrap, then the RoadLink is for you. The RoadLink is optimised for use with 10 or 11 speed 11-36T and 11-40T cassettes, Shimano road derailleurs and is best paired with Wolf Tooth's 40-tooth GC cassette extenders and Drop-Stop chainrings. The RoadLink specifically designed for the 10 and 11 speed Shimano road derailleur geometry. It also works very well with 9-speed road groups, all SRAM groups and Campagnolo derailleurs with cassettes up to 11-36T.Features: Material: 6061 Aluminium Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10 and 11-Speed Use: Road, Gravel, cyclocross (CX) Direct Mount-native frames are not supported Triple chainrings are not supported Double chainrings are only supported with GS (medium cage) rear derailleurs. You may need to change the front gearing so the capacity of the rear derailleur is not exceeded Made in the USA Manufacturer's Part Number: WTRLINK Weight: 17g10-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainrings sure to not exceed the derailleur's capacity) 11-42T: Not supported11-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-42T: Not supported 10-42T: Not supportedPlease Note: Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially for rough or off-road use. Please Also Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment and suspension configuration, individual results will vary. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Direct Mount Roadlink Derailleur HangerEnabling you to run larger range cassettes on your road or gravel bike, this direct mount (DM) version of Wolf Tooth's RoadLink Derailleur Hanger extension works with a wide range of Shimano 11 speed rear mechanisms. It’s the ideal adaptor for changing the gearing on your bike to a 1x11 speed drivetrain setup.This gear hanger extension fits Shimano’s GRX 810 (RX810), R7000 105, R8000 and RX800 Ultegra and R9100 Dura-Ace rear derailleurs. Since it was first introduced, this award-winning model has given riders the ability to easily increase the range of their Shimano road bike drivetrains, while also maintaining near-factory levels of chain wrap and shifting operation.Like the mountain-focused GoatLink, the RoadLink DM replaces Shimano’s stock direct mount link allowing you to relocate the derailleur to provide clearance for larger-than-stock range cassettes while maintaining chain wrap and improving shifting. The result - larger gear ranges that riders want and expect for their road, commuter, gravel and touring bicycles.Features:Material: CNC machined from 6061-T6 Aluminium with stainless steel boltMount: Direct mountCompatibility: Shimano GRX 810 (RX810), 105 R7000, Ultegra R8000 and RX800 and Dura-Ace R9100 rear derailleursFits standard derailleur hangers onlyOptimised for use with 11-36T, 11-40T, and 11-42T 11-Speed cassettesOptimised for use with GRX ultra-wide range drivetrains when using the GRX 810 (RX810) rear derailleurImproves performance with 10-42T 11-Speed cassettes, but not to factory levelsDoes not change the derailleurs total chain wrap capacityMade in the USAManufacturer’s Part Number: WTROADLINK-DMWeight: 20gPlease Note: Direct mount derailleur hangers are not supported. These are not common and the stock B-Link that the RoadLink DM replaces will not be present on bikes with a direct mount derailleur hanger.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Fat Paw Bike GripsPrepared for the most demanding routes, the Fat Paw Bike Grips feature a silicone foam material, that keeps your hands in place no matter how hard you ride. Produced by Wolf Tooth for riders who are looking for large grips with a soft feel, their 36mm thickness makes them some of the largest foam grips available on the market. Keeping you in full control of every brave descent, the reliable compound also provides excellent vibration damping and conforms to your hand for improved comfort.Features:Material: 100% Silicone FoamUse: Mountain Bike (MTB)Length: 135mmThickness: 9.5mmDiameter: 36mmSingle or Pair: PairWeight: 110g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Karv Cam GripsGreat for longer rides, this fantastic duo is equipped with a 6.5mm thickness which reduces hand fatigue and finger numbness. They feature a dual-density silicone compound which provides you with excellent vibration damping. This makes these grips conform to your hand for amazing comfort while maintaining durability. Coming complete with bar end plugs, these are a perfect choice of upgrade for riders who want a more ergonomic set of components with efficient padding. Features: Material: 100% Silicone Use: MTB Profile: Cam Diameter: 32mm Thickness: 6.5mm Length: 135mm Includes: Bar end plugs Weight: 56g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth ReMote Dropper Lever for Matchmaker XCompatible with SRAM Matchmaker X brake levers to give you a clean look on your bars, this universal dropper seatpost remote lever works with all mechanical-type droppers and brings you fast, accurate and smooth control of your saddle height. Made by Wolf Tooth from a tough 6061 T6 aluminium, it’s ready for aggressive use as you drop your saddle out of the way for wild descents and raise it back up for more attacking the climbs more efficiently.Low-Profile Dropper LeverEasy to use, this tough component is kitted out with a low-profile lever which sits close to your handlebar. This minimises the gap between your bar and your thumb for superior control that feels like a natural extension of one of your limbs. Also, to reduce the likelihood of knee contact in technical terrain sections, it offers more space around your bars to overcome challenging riding situations.Integrated Cable AdjustmentEquipped with a barrel adjuster, this top-quality component allows you to make on-the-fly changes quick and easy. This eliminates the rattles caused by common inline cable adjusters for a cleaner and more reliable rider-tuned set-up.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Clamp Compatibility: SRAM Matchmaker X Weight: 38.5g (approx.) Please Note: As this model is designed to combine with your SRAM Matchmaker X compatible brakes, it does not come with its own round handlebar clamp.Technologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing Low-Profile, Light Action lever: The ReMote LA (light action) lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals Integrated Cable Adjustment: The ReMote LA's barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here High-traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano Remote Clamp Conversion KitThis conversion kit allows you to attach a Wolf Tooth Dropper Lever to a Shimano I-Spec brake lever.By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Features: Material: Delrin and Aluminium Use: MTB or Road Compatibility: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu) Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano Remote Clamp Conversion KitThis conversion kit allows you to attach a Wolf Tooth Dropper Lever to a Shimano I-Spec brake lever.By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Features: Material: Delrin and Aluminium Use: MTB or Road Compatibility: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu) Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano Remote Clamp Conversion KitThis conversion kit allows you to attach a Wolf Tooth Dropper Lever to a Shimano I-Spec brake lever.By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Features: Material: Delrin and Aluminium Use: MTB or Road Compatibility: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu) Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Hope Light Action Remote Dropper LeverThis mountain bike dropper seat post lever is engineered to make operation as simple as possible on your off-road adventures. Specifically designed for use with Hope cable-actuated dropper posts, this Light Action model has a longer lever arm when compared to Wolf Tooth's standard ReMote model. As a result, the actuation force is reduced by a third and riders can enjoy a lighter and smoother feel.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category. CompatibilityReMote for Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Wolf Tooth's ReMote is designed to work with the early model of the Tech 3 brake levers. The newer model of the Tech 3 brakes has a threaded hole and will require some modifications to the ReMote base. Features: Material: 6061 T6 Aluminium with Delrin axle Use: MTB Compatibility: Hope cable actuated dropper seat postsType: Light Action remoteLever Length: 57.1mm Made in the USAWeight: 36gTechnologies: Up Front Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.Low-Profile, Light Action lever: The ReMote LA lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Integrated Cable Adjustment: The ReMote LA's solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash.High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions.Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano Light Action Dropper LeverThis remote dropper lever solves many of the common problems associated with dropper remotes thanks to its compact, ergonomic and sturdy design. It features a hard-wearing aluminium construction with a Delrin axle, making it more than capable of handling all the abuse that's associated with long days in the saddle. Its patent-pending ReMote LA has a longer lever arm than the standard ReMote and is ideal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category.CompatibilityCompatible with all cable-actuated dropper posts. Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post. Measure the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.Mounting TypesReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware. ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware. ReMote IS-II for Shimano I-Spec II - Includes IS-II hardwareFeatures: Material: 6061 T6 Aluminium with Delrin axle Use: MTB Made in the USA Single or Pair: Single Weight: Shimano IS-AB: 36g; Shimano IS-II: 35g; Shimano IS-EV: 35gTechnologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile, Light Action Lever: The ReMote LA lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote LA's solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available. High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad Compatibility: The ReMote LA has been tested and is recommended for use with Thomson, Fox Transfer, Race Face, Easton, and 9point8 cable-actuated dropper posts. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Numbers: WTREMOTELAISAB Black Option 1 IS-AB WTREMOTELAISEV Black Option 2 IS-EV WTREMOTELAISII Black Option 3 IS-II Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Dropper Remote Clamp Conversion KitThe Wolf Tooth Remote Clamp Conversion Kit attaches to bars with a 22.2mm diameter. Featuring delrin and aluminium parts, this kit offers durable and reliable performance alongside your Wolf Tooth ReMote dropper lever (available separately).Features: Material: Delrin and Aluminium Use: MTB Diameter: 22.2mm Type: 22.2mm Flat bar clamp conversion kit Compatibility: Wolf Tooth ReMote seat postTechnologies: Cable clamping bolt is a M4 x 6mm socket head cap screw with an M4 flat washer. Delrin and aluminium parts. For 22.2mm handlebar clamps, attach with 1 NM max (it does not take much!).Manufacturer's Part Number: WTCLMP22KIT Black 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.