Assos EQUIPE RS Targa Cycling Rain JacketThe ultralight Assos EQUIPE RS Targa Cycling Rain Jacket is now on its third iteration, with improvements to performance and durability, making it a wet-weather essential when training and racing. The outstanding wet-weather performance and lack of bulk of the EQUIPE RS Targa Cycling Rain Jacket is made possible by its combination of 3-layer Schloss Tex material and a durable breathable membrane. Schloss Tex is Assos' lightest waterproof textile, and it's also rustle-free and with slight stretch to give you a jacket with a performance fit. You'll also find full-taped seams prevent the slow ingress of water during prolonged bouts of rain. Thanks to the high degree of breathability, riding into a tough headwind or powering up steep climbs won't leave you soaking in sweat either. Compared to previous versions, this Targa jacket does away with the rear pocket slots. This removes an area of water ingress while also removing excess bulk too. With the two-way full-length front zipper you can unzip from the bottom, both as a means to access rear jersey pockets while also allowing easier control of ventilation and temperature regulation. A stitchless rear reflective strip also removes an area of water ingress while keeping you visible when daylight fades. A tall collar keeps the elements off at the neck and an extended rear lower panel fends off tyre spray at the back. The body-hugging Assos raceFit also ensures you're not wasting precious energy in battling a loose and flappy jacket. Easy to pack in a jersey pocket, the EQUIPE RS Targa Cycling Rain Jacket is now better than ever. Ideal for race day or training sessions, it slips over your cycling kit to fend off wind and rain while not weighing you down when not needed. Features:Materials: 73% Polyamide, 27% Elastane3-layer Schloss Tex waterproof materialHighly breathable membraneDouble-Slider Zipper - Ventilate from the top or bottom with easeRobust zip construction with oversized pull tabs for intuitive, glove-friendly operationFully taped seamsReflective strip bonded to the rear boosts visibility in low-light and extreme weatherconditionsAerodynamic raceFitBuy Assos Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
POC Cerebel Raceday HelmetThe Cerebel helmet has been developed in close collaboration with Garmin-Sharp Pro Cycling team, Volvo Car Group and WATTS Lab.The Cerebel is a compact aero road helmet, designed and engineered to improve aerodynamic performance. Extensive wind tunnel testing and CFD simulations shows that the Cerebel excels in dynamic and varying body positions, which in turn benefits upper body movement and overall lactate clearing efficiency compared to a static TT position.The helmet's rear is made of soft molded EVA covered in aerodynamic fabric for reduced drag and increased comfort.The Cerebel is equipped with a visor from Zeiss and uses a unique magnetic system to stay firmly in place. The visor tint is specifically developed together with Zeiss to enhance the contrast of the road surface, allowing the rider to spot any irregularities or obstacles in time.POC’s unique magnetic lens attachment system is designed to ensure that the lens is correctly positioned for low drag, and it also allows for quick attaching and removal.Features: High performance EPS liner, optimized in density. Aerodynamically superior design. Soft molded EVA covered in aerodynamic fabric. Detachable visor from ZEISS. POC's unique magnetic lens attachment system. Size adjustment system. Size: Medium (54-60cm) Weight: 380g Certifications: EN 1078, CPSC 12.03This helmet conforms to, or exceeds EU Standards only.Buy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
CeramicSpeed SRAM Type 3 1x11 Speed Clutch OSPWThis high-quality OPWS is specifically designed for use with your SRAM Rival or Force 1 type 3 derailleur for outstanding performance optimisation. This model wraps your chain around its 14T upper and 18T lower narrow-wide pulley wheels for reduced friction and watt savings starting at 2.4W, so you can enjoy increased speed and a more efficient drivetrain.Features: Material: Pulley Wheels: Aluminium; Cage: Carbon reinforced PA Compatibility: SRAM Rival or Force 1 Type 3 Pulley Wheels: 14T upper and 18T lower narrow-wide pulley wheels Cassette Compatibility: Fits cassettes up to 42-tooth Speed: 11 speed Use: Road, GravelBuy CeramicSpeed Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DT Swiss DT370 on RF AR Offset 40 Rear WheelWhether you're shredding your favourite trails with your riding buddies or exploring new routes through the forest on your own, this rear wheel is engineered for fast, smooth and reliable rolling performance. It combines a Race Face AR Offset rim with a DT Swiss DT 370 hub for a fantastic balance of strength and durability, wherever your next trail riding adventure takes you.Race Face AR Offset RimFeaturing a rock-solid 6061 aluminium rim construction, this rear wheel rim is more than capable of handling all the challenges associated with all-day epics in the mountains. Ready for charging across rock gardens, tree roots and debris, its robust design makes it all set for fast and run rides. The AR rim is slightly tweaked with an updated asymmetrical profile. Fully dialled to be stiffer, stronger and optimally balanced.DT Swiss DT 370 Rear HubBenefitting from a lightweight DT Swiss DT 370 hub, this rear wheel features 12x148mm Boost axle spacing for maximum stiffness as well as precise handling. Thanks to its tough alloy build, it also provides excellent reliability on the most demanding of terrain conditions. This version comes complete with a SRAM XD freehub.Features: Rim Material: 6061 Aluminium Use: Mountain Bike (MTB) Axle Size: 12x148mm, Boost Rim Type: Race Face AR Offset Hub Type: DT Swiss DT 370 Freehub: SRAM XD Wheel Size: 27.5mm Inner Rim Width: 40mm ERD: 562 Offset: 4.5mm Type: Clincher Spoke Count: 32 (spokes included) Single or Pair: Single rear wheelManufacturer's Part Number: 46-18710 Black 27.5" SRAM XD 12x148mmBuy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank SPANK 350 Boost Front Wheel This MTB front wheel features a tough alloy construction, which makes it ideal at handling all the knocks and bumps that come with blasting across the mountain at speed. Spank has also equipped this version with a low sectional profile height and a wide width, which adds radial compliance while also keeping its lateral stiffness. This makes it perfect for trail and enduro riders who want a wider profile front wheel, without adding any unnecessary weight to their ride. - Weight optimised wheel ideal for Trail/AM/Enduro bikes looking for a wide profile. - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness.- 30mm internal width extremely versatile, fitting tyres from 2.0” to 2.6” perfectly, and even allowing + size tyre use, without negative squaring off of tyre profiles. Features: Material: Alloy Use: MTB ERD (mm++) / ETRTO (mm): 27.5": 564 / 584x30.5; 29": 601 / 622x30.5 Rim Dimensions: Inner: 30.5mm; Outer: 35mm Spokes: J-Bend, triple butted 2.2/1.8/2.0, Brass External Nipples, 32H Tubeless Ready: Yes Valve: F/V Presta Technologies: Radial Compliance, Lateral Stiffness, BeadBite Anti-burp, OohBah Inverted Inner WallBuy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vision TriMax Carbon TT Clip On Bar ExtensionsPerfect for triathlon and time trial racing, these clip-on bar extensions deliver a fantastic combination of weight, aerodynamics, comfort and ease of use. With a wide range of stack and width adjustments, these can fit anyone from the amateur to the pro. These are equipped with a stiff and lightweight carbon construction, which makes them more than capable of handling all the intensity from triathlon racing and time trial events. Vision has also kitted these out with a J-Bend design that allows you to benefit from a greater choice of positions as well as increased comfort, so you can get the best performance out of every ride.Features: Material: Carbon Use: Triathlon, Time Trial Shape Design: J Bend Clamp Diameter: 31.8mm Cable Routing: Internal cable routing and Di2 compatible Stack: 55mm Reach: -9mm to -99 (Centre of clamp to rear edge of armrest -7.5mm Increments); 40mm armrest width adjustment Width: 210mm to 360 (15mm Increments) Armrest Rotation: 0-13 degrees Weight: 505gTechnologies: Highly adjustable and customisable clip-on design. Easy set-up and adjustability via open-access underside bolts. Lightweight carbon extensions. Low-profile armrest pads. For 31.8mm basebar.Manufacturer's Part Number: 670-0290013030Buy Vision Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey Superlogic Carbon Link SeatpostComing with a full carbon fibre shaft to keep its weight low and Ritchey’s highly adjustable clamp head, the Superlogic Carbon Link is the ideal seatpost for road bike racers who need to dial in their perfect saddle position. This is because the patented “LINK” saddle rail clamp can be reversed to enable a further 10mm of forward and backward adjustment. That’s not all, as the advanced “FlexLogic” carbon layup of the post offers 15% more vertical compliance, helping to dampen vibrations and sudden shocks from riding over poor road surfaces.Features: Material: Monocoque Carbon Fibre shaft, Aluminium clamp head Finish: Matte UD carbon finish Clamp Type: Reversible, allows for an additional 10mm of fore-aft saddle adjustment Saddle Rail Compatibility: Standard 7x7mm rails (not compatible with Carbon 7x9mm types) Offset: 15mm Saddle Clamp Torque: 15Nm (max) Seat Collar Torque: 6Nm (max) / 7Nm (max) for Ritchey steel frames Also adaptable to suit Ritchey Vector Evo Monorail and Selle Italia MonoLink saddles (alternative clamp plates sold separately) Weight: 145g (27.2x350mm, approx.)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey Comp Carbon + Alloy Cyclocross Bike ForkA superb set of forks for the speedy cyclocross racer, this Comp model uses top-notch alloy and carbon components to create a responsive, vibration-damping front-end fixture. Combining carbon blades with an alloy crown and steerer, a dependable performance is assured, however hard you ride, with the 3K carbon weave finish adding extra impact resistance on more rugged routes. Composed and controlled, this Ritchey fork ensures quality and confidence on every run. Features: Blade Material: Carbon Crown Material: Alloy Steerer Material: Alloy Steerer Length: 300mm Steerer Diameter: 1 1/8" Rake: 45mm Axle to Crown: 391mm Finish: 3K Carbon Weave Weight: 540g (with uncut steerer) Buy Ritchey Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp's SL Sprint Stem is an ideal balance of stiffness and lightweight. The stem weighs in at just 1.8g per newton meter of stiffness using SRAM s Exogram technology and was designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Updated distinctive Zipp cosmeticsDesigned using SRAM Exogram technology and weighs just 123g (100mm)12 degree drop for an aggressive riding position Secure our bolt faceplace using titanium Torx T25 bolt headsZipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem. The SL Sprint comes with its own stem cap that s designed to be aerodynamically efficient by blending into the stem body. If you want the ultimate lightweight and stiff stem for your road bike, look no further than the Zipp SL Sprint!
Hope's original crankset was a huge hit, but Hope being Hope strived to improve them. The result is the new EVO Crankset. 15% lighter, stiffer and easier to install and remove, the Hope Technology EVO Crankset sets a new benchmark for aluminium cranksets.15% lighter and stiffer than the original Hope CranksetNew self-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7150 aluminium crank arms are incredibly stiff & strongLightweight at just 560g (170mm spiderless cranks arms inc. axle)Using their tried and tested forged and CNC machined aluminium construction method, Hope fired up the latest FEA analysis tools and got to work on improving the original Hope crankset. After rigorous lab and field testing, the resulting EVO Crankset is 15% lighter and stiffer than before and now features a self-extracting axle/arm interface. This makes the cranks incredibly easy to install and remove and doesn't require proprietary tools like the original crankset.The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology EVO Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Hope's original crankset was a huge hit, but Hope being Hope strived to improve them. The result is the new EVO Crankset. 15% lighter, stiffer and easier to install and remove, the Hope Technology EVO Crankset sets a new benchmark for aluminium cranksets.15% lighter and stiffer than the original Hope CranksetNew self-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7150 aluminium crank arms are incredibly stiff & strongLightweight at just 560g (170mm spiderless cranks arms inc. axle)Using their tried and tested forged and CNC machined aluminium construction method, Hope fired up the latest FEA analysis tools and got to work on improving the original Hope crankset. After rigorous lab and field testing, the resulting EVO Crankset is 15% lighter and stiffer than before and now features a self-extracting axle/arm interface. This makes the cranks incredibly easy to install and remove and doesn't require proprietary tools like the original crankset.The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology EVO Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Hope's original crankset was a huge hit, but Hope being Hope strived to improve them. The result is the new EVO Crankset. 15% lighter, stiffer and easier to install and remove, the Hope Technology EVO Crankset sets a new benchmark for aluminium cranksets.15% lighter and stiffer than the original Hope CranksetNew self-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7150 aluminium crank arms are incredibly stiff & strongLightweight at just 560g (170mm spiderless cranks arms inc. axle)Using their tried and tested forged and CNC machined aluminium construction method, Hope fired up the latest FEA analysis tools and got to work on improving the original Hope crankset. After rigorous lab and field testing, the resulting EVO Crankset is 15% lighter and stiffer than before and now features a self-extracting axle/arm interface. This makes the cranks incredibly easy to install and remove and doesn't require proprietary tools like the original crankset.The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology EVO Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.