Five Ten Hellcat MTB ShoesThe Hellcat MTB Cycling Shoes are for those of you who love the thrill of taking on technical trails, downhill races and enduros. Clip-in. Get Rowdy. Featuring the legendary Stealth® C4™ rubber sole, complete with Dotty tread pattern, the Hellcat MTB Shoes offer a confidence-inspiring level of grip on the pedals. And with their larger cleat box compared to regular clipless shoes, the Hellcat makes clipping in faster and easier with quick cleat location, and plenty of room to stay on the pedal when things get wild and you hit a section clipped out. Lace closure with a hook and loop strap provides a secure fit and support, with a compression moulded EVA midsole and Boost™ Mid-sole taking the sting out of the trail and absorbing vibration and impacts to your feet helping to reduce fatigue. Perfect for the gnarliest of downhill runs and unrelenting enduro stages. All-weather riding is possible with the coated Leather upper shedding water and drying out fast after wet sessions on the hill. Welded joins also give a boost to durability, making these Hellcats tougher than ever. The ultimate shoe for the clipped-in gravity racer and rider.Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Coated leather upperAbrasion-resistant upper weldings for protectionStealth® C4™ rubber for unbeatable grip and ease of entry on clipless pedalsBoost™ Mid-soleLace and hook and loop closure for added supportMoulded socklinerPerforated EVA tongue with mesh overlay2-bolt cleat compatible (cleats not supplied)Buy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Five Ten Hellcat MTB ShoesThe Hellcat MTB Cycling Shoes are for those of you who love the thrill of taking on technical trails, downhill races and enduros. Clip-in. Get Rowdy. Featuring the legendary Stealth® C4™ rubber sole, complete with Dotty tread pattern, the Hellcat MTB Shoes offer a confidence-inspiring level of grip on the pedals. And with their larger cleat box compared to regular clipless shoes, the Hellcat makes clipping in faster and easier with quick cleat location, and plenty of room to stay on the pedal when things get wild and you hit a section clipped out. Lace closure with a hook and loop strap provides a secure fit and support, with a compression moulded EVA midsole and Boost™ Mid-sole taking the sting out of the trail and absorbing vibration and impacts to your feet helping to reduce fatigue. Perfect for the gnarliest of downhill runs and unrelenting enduro stages. All-weather riding is possible with the coated Leather upper shedding water and drying out fast after wet sessions on the hill. Welded joins also give a boost to durability, making these Hellcats tougher than ever. The ultimate shoe for the clipped-in gravity racer and rider.Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Coated leather upperAbrasion-resistant upper weldings for protectionStealth® C4™ rubber for unbeatable grip and ease of entry on clipless pedalsBoost™ Mid-soleLace and hook and loop closure for added supportMoulded socklinerPerforated EVA tongue with mesh overlay2-bolt cleat compatible (cleats not supplied)Buy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Five Ten Freerider Pro MTB Cycling ShoesWhen it comes to flat-pedal performance, the Five Ten Freerider Pro MTB Cycling Shoes are hard to beat. Unshakeable grip and a tough upper keep you firmly and comfortably in control across even the trickiest of mountain bike trails. If you're taking on more challenging trails, hitting gaps, drops and rock and rooted strewn chutes, you need laser-like focus and confidence-inspiring pedal grip. It's here the Freerider Pro MTB Cycling Shoes come into their own. At the heart of the Pro is the super-sticky Stealth® S1 rubber outsole. This legendary sole has a well-deserved reputation for pedal grip and trail feel. In combination with the classic Dotty tread pattern, you'll enjoy the renowned traction and class-beating feel that Five Ten is famous for. Off the bike too, the sole keeps you sure-footed across slippery terrain. Perfect for sessioning trail features.A compression moulded EVA midsole also provides cushioning and support across rougher trails. And a Poron® toe box gives protection to the toes from rock strikes, stumps and sudden mid-corner dabs.Elsewhere, the fast-drying synthetic upper delivers all-weather performance for damp and mucky conditions and gives you quick turnaround between rides. Perfect for all-mountain and enduro riding the Freerider Pro is incredibly versatile for all riding disciplines and still doesn't look out of place in the bar afterwards.Trail riders, enduro racers or the bike park rat who clocks endless laps all summer will all find a fantastic shoe for flat pedal use in the Pro. Ride foot out flat out in full confidence out on the trails. Features:Synthetic upper which is fast-drying weather friendlyStealth® S1 rubber outsole for unbeatable gripClassic Dotty™ treadImpact-resistant Poron toe box for added toe protectionCompression moulded EVA midsole for long term cushioningWeight: 780gBuy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Five Ten Freerider Pro MTB Cycling ShoesWhen it comes to flat-pedal performance, the Five Ten Freerider Pro MTB Cycling Shoes are hard to beat. Unshakeable grip and a tough upper keep you firmly and comfortably in control across even the trickiest of mountain bike trails. If you're taking on more challenging trails, hitting gaps, drops and rock and rooted strewn chutes, you need laser-like focus and confidence-inspiring pedal grip. It's here the Freerider Pro MTB Cycling Shoes come into their own. At the heart of the Pro is the super-sticky Stealth® S1 rubber outsole. This legendary sole has a well-deserved reputation for pedal grip and trail feel. In combination with the classic Dotty tread pattern, you'll enjoy the renowned traction and class-beating feel that Five Ten is famous for. Off the bike too, the sole keeps you sure-footed across slippery terrain. Perfect for sessioning trail features.A compression moulded EVA midsole also provides cushioning and support across rougher trails. And a Poron® toe box gives protection to the toes from rock strikes, stumps and sudden mid-corner dabs.Elsewhere, the fast-drying synthetic upper delivers all-weather performance for damp and mucky conditions and gives you quick turnaround between rides. Perfect for all-mountain and enduro riding the Freerider Pro is incredibly versatile for all riding disciplines and still doesn't look out of place in the bar afterwards.Trail riders, enduro racers or the bike park rat who clocks endless laps all summer will all find a fantastic shoe for flat pedal use in the Pro. Ride foot out flat out in full confidence out on the trails. Features:Synthetic upper which is fast-drying weather friendlyStealth® S1 rubber outsole for unbeatable gripClassic Dotty™ treadImpact-resistant Poron toe box for added toe protectionCompression moulded EVA midsole for long term cushioningWeight: 780gBuy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
ISM PR 1.0 Bike SaddleCreated by ISM to be suitable for all types of cycling and male or female riders, the PR 1.0 saddle provides you with the pressure relief and support you need for consistent riding comfort. Whether you’re wearing padded bib shorts for long-distance road rides or your casual clothes on your city bike, you’ll stay comfortable mile after mile. This saddle is also fully UCI approved, should you wish to use it for competitive racing.ISM (Innovative Saddle Makers) saddles are a revolution within the cycling industry. Their patented, nose-less design provides support for the pubic bones and takes pressure away from the soft tissue area. The result is no loss of blood flow, no numbness and ultimately, less pain and more comfort.Independent research shows that traditional saddles don't give enough support to the pubic bones. As a result, they cause pressure in that area of soft tissue that contains many nerves and arteries. This pressure can result in a reduction in blood flow, numbness and pain. The shorter, nose-less design of ISM saddles, coupled with the cut off front area, shift pressure back to the sit bones and relieve this pressure.Unlike many saddle manufacturers, ISM does not have gender-specific models. Their saddles are designed to relieve pressure and improve comfort for both men and women alike. Whether you ride your bike for competition or just for fun, the ISM PR 1.0 saddle will have you falling in love with cycling all over again.Get the most from your saddle, follow ISM's Saddle Installation Instructions HERE.Features: Padding: 50-Series Foam and Gel (exceptional level of padding) Rails: CrN/Ti Alloy, 7x7mm Dimensions: 245x130mm (LxW) Category: Performance recreation - short design with extra padding Use: Triathlon, Mountain Bikes (MTB), Hybrid bikes Increased padding for all day comfort on any bike Patented design allows full blood flow and reduces numbness Unisex design, suitable for women and men UCI legal, suitable for use while racing Weight: 325gBuy ISM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Le Col Sport Bib Tights IIBuilding upon the success of the original Sport Bib Tights, the Le Col Sport Bib Tights II, retaining the cosy warmth of Italian fleece fabrics but now with added visibility to keep you seen as evenings draw in.Made from brushed fleece-backed Roubaix material, the Sport Bib Tights II hold efficiently onto the heat you generate while riding, keeping you warm as temperatures fall. Roubaix also feels great against the skin and breathability is excellent too, ensuring you remain as sweat-free as possible when talking hills and headwinds. Inside, the foam chamois pad gives you on-the-saddle support and comfort, mile after mile. Silicone leg grippers keep the tights solidly in place. And to the back of the legs, reflective tabs keep you more visible as the days draw in.Whether you're riding to work or smashing out the base miles, keep yourself comfortable this winter with the Le Col Sport Bib Tights II.Care instructionsMachine Wash at 30°C / 86°FDo not use fabric conditionerDry flat, do not tumble dryDo not bleach, iron or dry cleanFeatures:Material: 80% Recycled Polyamide, 20%Recycled ElastaneItalian fleece-lined fabricsSilicone leg gripper for a sturdy fitPremium embroidered logosColour binding on bib uppersHigh-quality foam chamoisUpdated colour profilesBuy Le Col Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Mojito3 BiColour Road Helmet (WG11)The Kask Mojito3 BiColour Road Helmet (WG11) is a modern cycling masterpiece, offering the perfect blend of safety, comfort, ventilation and smooth aerodynamics. The Mojito has always been a leader in both style and performance. But the Kask design and engineering team have continued to push the boundaries of cycle helmet performance and the result is the Mojito3.Safety. Comfort. Style. Mojito Cubed. The first thing you'll notice is the sleek design of the Mojito is retained, including the iconic tail design, but it gets a modern update, with more natural lines and a fresh streamlined look. With this design, Kask have been able to reduce the overall volume of the helmet so it sits more comfortably, but at the same time, ventilation is improved.Blue Tech padding also adds to the fresh feel, allowing sweat to escape easily, leaving you dry as the heat rises. Cool in looks and cool in performance. Despite the reduced volume, protection has been improved quite significantly. Head protection gets a boost thanks to the increased coverage across the rear and front of the helmet - to quote Kask's figures there is a 32% improvement in protection against impacts to the rear, 25% on frontal impacts and 12% on top impacts, making it the safest Mojito yet. OctoFit retention systemThe Mojito has always been renowned for its superb fit and comfort, made possible by the innovative OctoFit retention system.This system is retained on the Mojito3. Not only does this system allow you to quickly and easily customise the fit around the circumference of your head, the rear cradle moves vertically, allowing the perfect fit across the back of your skull. Not only is this better for your comfort, but in the event of a crash, it keeps the helmet in place to afford the very best protection. WG11 Safety Testing ProtocolsThe Mojito3 exceeds the stringent WG11 testing protocols. This series of protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike.Features:Reduced volume, streamlined designImproved ventilationBreathable Blue Tech PaddingOctoFit retention systemExceeds WG11 International Safety Test ProtocolsReflective detailsWeight: 230g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Mojito3 BiColour Road Helmet (WG11)The Kask Mojito3 BiColour Road Helmet (WG11) is a modern cycling masterpiece, offering the perfect blend of safety, comfort, ventilation and smooth aerodynamics. The Mojito has always been a leader in both style and performance. But the Kask design and engineering team have continued to push the boundaries of cycle helmet performance and the result is the Mojito3.Safety. Comfort. Style. Mojito Cubed. The first thing you'll notice is the sleek design of the Mojito is retained, including the iconic tail design, but it gets a modern update, with more natural lines and a fresh streamlined look. With this design, Kask have been able to reduce the overall volume of the helmet so it sits more comfortably, but at the same time, ventilation is improved.Blue Tech padding also adds to the fresh feel, allowing sweat to escape easily, leaving you dry as the heat rises. Cool in looks and cool in performance. Despite the reduced volume, protection has been improved quite significantly. Head protection gets a boost thanks to the increased coverage across the rear and front of the helmet - to quote Kask's figures there is a 32% improvement in protection against impacts to the rear, 25% on frontal impacts and 12% on top impacts, making it the safest Mojito yet. OctoFit retention systemThe Mojito has always been renowned for its superb fit and comfort, made possible by the innovative OctoFit retention system.This system is retained on the Mojito3. Not only does this system allow you to quickly and easily customise the fit around the circumference of your head, the rear cradle moves vertically, allowing the perfect fit across the back of your skull. Not only is this better for your comfort, but in the event of a crash, it keeps the helmet in place to afford the very best protection. WG11 Safety Testing ProtocolsThe Mojito3 exceeds the stringent WG11 testing protocols. This series of protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike.Features:Reduced volume, streamlined designImproved ventilationBreathable Blue Tech PaddingOctoFit retention systemExceeds WG11 International Safety Test ProtocolsReflective detailsWeight: 230g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Mojito3 BiColour Road Helmet (WG11)The Kask Mojito3 BiColour Road Helmet (WG11) is a modern cycling masterpiece, offering the perfect blend of safety, comfort, ventilation and smooth aerodynamics. The Mojito has always been a leader in both style and performance. But the Kask design and engineering team have continued to push the boundaries of cycle helmet performance and the result is the Mojito3.Safety. Comfort. Style. Mojito Cubed. The first thing you'll notice is the sleek design of the Mojito is retained, including the iconic tail design, but it gets a modern update, with more natural lines and a fresh streamlined look. With this design, Kask have been able to reduce the overall volume of the helmet so it sits more comfortably, but at the same time, ventilation is improved.Blue Tech padding also adds to the fresh feel, allowing sweat to escape easily, leaving you dry as the heat rises. Cool in looks and cool in performance. Despite the reduced volume, protection has been improved quite significantly. Head protection gets a boost thanks to the increased coverage across the rear and front of the helmet - to quote Kask's figures there is a 32% improvement in protection against impacts to the rear, 25% on frontal impacts and 12% on top impacts, making it the safest Mojito yet. OctoFit retention systemThe Mojito has always been renowned for its superb fit and comfort, made possible by the innovative OctoFit retention system.This system is retained on the Mojito3. Not only does this system allow you to quickly and easily customise the fit around the circumference of your head, the rear cradle moves vertically, allowing the perfect fit across the back of your skull. Not only is this better for your comfort, but in the event of a crash, it keeps the helmet in place to afford the very best protection. WG11 Safety Testing ProtocolsThe Mojito3 exceeds the stringent WG11 testing protocols. This series of protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike.Features:Reduced volume, streamlined designImproved ventilationBreathable Blue Tech PaddingOctoFit retention systemExceeds WG11 International Safety Test ProtocolsReflective detailsWeight: 230g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stans No Tubes Arch MK4 RimFeaturing a 28mm wide asymmetric rim shape and an ultra-strong 6069 alloy construction, this mountain bike (MTB) rim is built for strength and reliability to handle the demands of modern MTB riding. Mountain bikes have changed in the decade since the original Arch rim helped introduce the world to tubeless technology. Today's Arch MK4 rim has evolved to match these more capable bikes. Through all the years of testing and refinement of this rim, one thing has never changed: versatility. Now more than ever, when you want a reliable rim that can handle every trail, the Arch MK4 is for you.6069 Aluminium Alloy RimThe Arch MK4 rim is light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing. Constructed of light and strong 6069 aluminium alloy, with a reinforced spoke bed and 28mm internal width ideal for 2.2-2.5″ tyres, the Arch MK4 can get you up the climbs easier and make the descent even better.Asymmetric ShapeThe Arch MK4's BST Asymmetric shape improves spoke angle, allowing for a stronger overall wheel build. Unlike most asymmetric rims that struggle with tubeless inflation and consistent airtight seal under hard cornering, the Arch MK4's shape is designed to equalize pressure for easy inflation and incredibly strong tyre retention on both sides of the rim.Patented Bead Socket TechnologyStan's patented Bead Socket Technology, combined with a stronger asymmetric design, light and durable 6069 alloy, and the perfect rim width for balancing control and weight, make the Arch MK4 your best choice for all-around riding. Powering up rocky switchback climbs or slapping berms on every descent, the Arch MK4 is ready for whatever you can throw at it.Features: Material: 6069 Aluminium with welded joint and reinforced spoke bed Use: Mountain Bike (MTB); Cross Country (XC) Rim Width: Internal: 28mm; External: 31.4mm; Depth: 18.9mm ETRTO: 26" Option: 559x28.0; 27.5" Option: 584x28.0; 29" Option: 622x28.0 ERD: 26" Option: 536mm, 2.5mm Offset mm; 27.5" Option: 561mm, 2.5mm Offset mm; 29" Option: 600mm, 2.5mm Offset Max Spoke Tension: 130kgf (1275N) Max Pressure with 2.20" Tyre: 41psi Max Pressure with 2.50" Tyre: 35psi Brake Compatibility: Disc brake only Valve Type: Presta Tape: 30mm Tubeless Ready: Yes Single or Pair: Single Weight: 26" Option: 431g; 27.5" Option: 451g; 29" Option: 481gTechnologies: Versatile 28mm internal rim width optimized for 2.2-2.5” tyres. Light and durable 6069 aluminium with welded joint and reinforced spoke bed. BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build. 3-year rim warranty with 1-year crash replacement.Buy Stans No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.