Schwalbe Freeride Mountain Bike TubeSchwalbe's Freeride Mountain Bike Tube (MTB) is designed to be incredibly lightweight and hard-wearing. Constructed from a rubber material to enhance air retention and stabilise air pressure, this Mountain Bike Tube ticks all the boxes for tackling challenging MTB trails. Features:Material: Rubber CompoundDurableLess air leakage and less to pumpAir retention quality controlReliableStable air pressureRemovable Core: YesValve: Presta 40mmWeight: 185gBuy Schwable Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Schwalbe ProCore Mountain Bike Inner TubeOff road: Riding at lower pressure means better performance ... but at the same time it increases the risk of failures. The limit so far is at about 20 psi, below which it's hardly possible to dare to ride normal MTB tyres.But Nothing Stays the SameIn the future, air pressure can be controlled in the tyre's double chambers. In the outer chamber, the air pressure is extremely low - ideal for maximum off road performance. In the inner chamber, directly on the rim, there is high air pressure - even a very strong impact cannot dent the rim edge. At the same time, the inner high-pressure system secures the tyre onto the rim. “Burping”, the dreaded loss of air at low pressure in conventional tubeless systems, is impossible.The NameProcore is derived from "Progressive Core". The core (internal high-pressure chamber) progressively absorbs even the hardest impacts.CompatibilityYou can mount Procore with any tubeless compatible MTB tyre. The system is available for all three MTB wheel sizes (26", 27.5", 29"). Weight approx. 200g per wheel. Compatible with all wheels, independent of the brand. Minimum inner rim width: 23mm.Procore is a joint development of Schwalbe and Syntace.Procore - The Outer Chamber: The outer chamber is tubeless. Therefore, any tubeless compatible MTB tyres can be used. The tyre is filled with some liquid sealant (approx. 60ml) and should be at least 57mm (2.25") wide.Procore - The Inner Chamber: Two special Procore components form the inner high-pressure chamber: the special Procore tube and the Procore inner tyre. This "core" is extremely high pressure stable and at the same time very light.The Rim: Of course, the rim must be tubeless compatible and sealed with a tubeless rim band. It should have an inner rim width of at least 23mm. The wider the rim, the easier the installation and the better the performance under low air pressure. The very wide Syntace rims are a perfect fit.The Procore ValveThe patented dual valve of the Procore tube distributes the air into both chambers. The upper part of the valve is a selector. With a simple turn, you select whether air is pumped into the inner or the outer chamber. (Valve sold separately).The Procore Air GuideThe small red component made of white plastic ensures that the air can flow past the inner high-pressure chamber into the outer low pressure chamber.Features: Use: MTB Type: Tyre liner Size: Multiple size options available to select Compatibility: Procore system Includes: Tyre liner onlyTechnologies: - Tyre pressure can be reduced to a minimum 14 psi, thus providing a huge amount of grip. Even on the roughest terrain tyres “stick” to the ground. - Due to the extra cushioning and traction there is much better steering, braking and traction control. - No more risk of snake bites. The rims are extremely well protected from denting. - Even in the toughest conditions, significantly lighter tyres can be used. - Excellent emergency running characteristics due to the internal high-pressure air chamber.Buy Schwalbe Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Michelin A1 AirComp Ultralight Road Bike TubeDon't let unnecessary weight be your downfall, these incredibly lightweight Road Bike Tubes from Michelin weigh in at only 70g (in the A1 version) offering an added advantage on race day. Suitable for professional and amateur cyclists, help prevent unwanted weight from impacting on your performance. Features:Lightweight Michelin qualityWheel Size/Width: 700c/18-25cClincher: YesValve Type: PrestaAvailable with Presta Valves Lengths: 40mm, 52mm, 60mmWeight: 70gBuy Michelin Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Michelin A1 AirComp Ultralight Road Bike TubeDon't let unnecessary weight be your downfall, these incredibly lightweight Road Bike Tubes from Michelin weigh in at only 70g (in the A1 version) offering an added advantage on race day. Suitable for professional and amateur cyclists, help prevent unwanted weight from impacting on your performance. Features:Lightweight Michelin qualityWheel Size/Width: 700c/18-25cClincher: YesValve Type: PrestaAvailable with Presta Valves Lengths: 40mm, 52mm, 60mmWeight: 70gBuy Michelin Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Michelin A1 AirComp Latex Road Bike TubeThis Road Bike Tube from Michelin is made from durable latex that offers enhanced rolling resistance and weighing only 75g making it one of the most lightweight inner tubes on the market. From local criteriums to the grand classics and the Tour de France, professional riders demonstrate the Aircomp Latex's superiority throughout the season. It's the ultimate accessory for today's high-performance wheels and tyres.As with any high-performance product, latex tubes require regular maintenance; be sure to check your air pressure before every ride.Features:Valve: PrestaValve Lengths: 36mm (18 - 20c) and 60mm (22-23c)Weight: 75gSize: 18-20c or 22-23cNB: Not suitable for use with Carbon wheelsBuy Michelin Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Michelin World Tour Bike TyreA reliable and economical solution for daily riding, Michelin has incorporated its Protek technology into the World Tour road bike tyre’s rubber compound and casing. This has resulted in much-improved puncture protection and tyre durability.Features: Tyre Type: Clincher Bead Type: Wire Compound: Proteck Compound Casing: 22 tpi Tubeless Compatible: No ETRTO: 26x1 3/8": 35-590; 700x35c: 35-622; 27x1 1/4": 32-630; 26x1.4" : 35-590 Weight: 26x1 3/8": 571g ; 26x1.4": 565g; 27x1 1/4": 640g; 700x35c: 635gTechnologies:Proteck Compound: This rubber mix with its antioxidant elements and reinforced architecture promote high mileage, excellent grip, resistance to ageing, climatic variations and pollutionNote: These tyres are in the road section and despite the 26" description for some sizes, they will NOT fit onto an MTB rim.Buy Michelin Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Lezyne GPS Bike Bracket Kit The Lezyne GPS Bracket Kit is engineered to attach at any 90° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out.The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place. FeaturesDurable constructionX-Lock design secures your Lezyne GPS computer in place for worry-free riding over any type of terrain Buy Lezyne Nutrition & Training from Chain Reaction Cycles, the World's Largest Online Bike Store.
Our state-of-the-art, multi-layered Tungsten Wet Lube is a blend of biodegradable oils which penetrate all parts of the chain for a silky-smooth ride. Tungsten Wet Lube sticks to the surface of the chain for continued lubrication even in the harshest environments. Water and dirt quickly peel away from the surface of the chain as the lubricant strips back contaminants while you ride. Tungsten Disulphide was originally developed for space projects as a lubricant due to it having a lower coefficient of friction compared with Ceramics, Teflon and Graphite, as well as being more durable. Tungsten smooths out the surface of the metal to minimise surface imperfections, resulting in up to 40% less friction than Ceramics, up to 50% less than Teflon, and up to 60% less than Graphite. Not only is it faster, but it’s also more durable, creating an atomic layer on the surface of the chain to reduce wear of the drivetrain and protect moving components. After the first couple of applications, the Tungsten smooths out the small imperfections in the metal surfaces of the chain, creating a rock hard protective and ultra-slippery layer. This layer is created on pressure points within the drivetrain, only layering one atom thick to apply superior lubrication exactly where it’s needed. The next-generation formulation is designed to stick firmly to the surface of the chain which not only reduces wear but also increases intervals between lubricant applications to save you money. It’s also completely biodegradable with no nasty solvents, making it kind to you, the environment and your pride and joy. 50ml bottle content. How to use: How to use your Tungsten Wet Lube Step 1: Degrease chain, chain ring and cassette thoroughly. Step 2: Shake the bottle well before application. Step 3: Apply lubricant evenly to all parts of the chain. Step 4: Allow to dry for 5 minutes before riding. Step 5: Apply as needed for continuous lubrication. Important: Avoid contact with braking components. Keep out of reach of children.
Keep your bike in pristine condition thanks to the 3-piece protection from the Bike Shield Combo Stay & Cable Shields Pack. Ideal for protecting your bikes finish from chain slap, scratches, grit and stones. Easy to apply and remove with no sticky residue left behind, this pack is ultra-tough and virtually invisible while on your bike. For long-lasting durability ride after ride, the Combo Stay & Cable Shields Pack will give you maximum protection from scratches when you need it most.
E-Bike Snow Foam has been developed by Tru-Tension for quick and easy cleaning, leaving a polished shimmering shine. Perfect for cleaning in a garage or shed without the need to rinse with water. Ideal for all E-Bikes, Road and MTB. Simply spray on Snow Foam and watch it instantly lift dirt from the surface. Wipe away without the need for water before buffing the surface clean. The perfect E-Bike cleaner. Our all-in-one instant action foam cleaner soaks into the dirt, lifting it away from the surface for an easy clean without the need for water. Once dry it leaves a polish which is buffed in to leave a high gloss finish. Perfect for cleaning indoors and without the need for water. Ideal for removing light dirt from frames and wheels. Safe to use on plastic and painted surfaces. Spray. Soak. Wipe. Buff. How to use your E-Bike Snow Foam Cleaner: Step 1: Spray onto frame, wheels or any painted, metal or plastic surfaces. Step 2: Leave for 5 – 30 seconds. The foam will go to work lifting the dirt and grime. Step 3: Wipe dirt away with a clean cloth. Step 4: Once dirt is removed, use a separate clean cloth (microfibre suggested) to buff the surface in circles to activate the polish, leaving a gleaming finish. Important: Do not use on braking components.
Directions: Get your bike wet Spray or brush Dirt Juice onto the bike and leave it to work its magic for no longer than 2 minutes, agitating the most stubborn areas with brush or sponge. If you prefer a bit more foaming action spray directly on to a brush and get to work with that. Rinse off with fresh water.