Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
The Micro Pro is the classic Dynaplug tool; super compact, weatherproof and beautifully machined. There when you need it, hassle free when you don't. No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMicro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhereKit includes the tool, 2 x stainless steel insertion tubes, 5 x soft nose standard plugs, 1 x micro knife, 1 x air stopper and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageThe Micro Pro is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for a big day out, including multiple pre-loaded Dynaplug insertion tubes, an air stopper tool for helping to prep the hole for insertion and a micro knife for cutting the plug tail. Despite all this, the Micro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhere.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Whether you've lost a valve cap or just want to bling your existing pair of Peaty's valves, this kit gives you everything you need. Compatible with all Peaty's Tubeless Valves. Includes: 1x spoke key cap (for 3.4mm spoke nipple), 1x valve core remover cap & 2x lock rings.
The new Bel Air 3.0 Saddle from SDG utilises SDG's proven iconic shape with industry leading features to give you unparalleled comfort. It features Cordura side panels that improve the durability of the saddle and then there is a comfortable lightweight EVA foam for comfort that is further enhanced by the free float rail inserts which allow more flex & forgiveness on the wings of the saddle. There is also a continuous peri-canal channel from tip to tail and a wider nose that helps when climbing.Proven Profile Utilizes the timeless shape of the current Bel-Air V3, but in a more price point package by using traditional sealing methodsCordura Side Panels Protective side panels are stitched to improve the durability of the saddleLightweight EVA Foam Comfortable, durable and lightweight EVA foam to provide premium foam performanceFree Float Rail Inserts Enhances comfort and allows more flex forgiveness on the wings of saddleNylon Glass Base With Bridge - Increases power transferPeri-Canal - Continuous relief channel from tip to tailNose Platform - Wider nose to aid in climbingHidden Undercut - Relief cut-out in bottom of baseSpecification:Length: 260mmWidth: 140mmWeight: 290gRail: Steel
Orange Seal's Rim Tape fits most rims and provides an airtight seal to turn your set up tubeless. The elasticity of the tape allows greater flexibility in fitting different types of rims.Fits Most RimsProvides Airtight Seal11m Roll Seals Approx. 2 Rims
Orange Seal's Rim Tape fits most rims and provides an airtight seal to turn your set up tubeless. The elasticity of the tape allows greater flexibility in fitting different types of rims.Fits Most RimsProvides Airtight Seal11m Roll Seals Approx. 2 Rims
LifeLine's AirBlast Tubeless Tyre Track Pump enables you to pop inflate tubeless tyres onto the rim via stored pressurised air in the separate chamber. Durable alloy constructionStores pressurised air to pop inflate tubeless tyresTop mounted gauge for easy readingAuto select head for either Presta or Schrader valvesMax pressure: 240psiWeight: 2.27kgIn order to do so, you need to have the pump valve closed and then pump up to 240psi into the chamber and then release the valve. This track pump is made of durable alloy and features an auto-select head that is compatible with Presta and Schrader valves and an easy to read top mounted pressure gauge.
Lifeline's Universal Tubeless Presta Valves, which come as a pair, have been manufactured to offer quick, easy, and efficient installation of tubeless tyres. Allowing maximum airflow from CO2 cartridges and traditional pumps, these Universal Tubeless Presta Valves also have a removable core for easy inflation.Easy installationRemovable coreAccept high-volume airflow