RoadAn all in one tyre repair and reinflation solution, there is no faster way to get yourself back up and rolling than the Dynaplug Air,Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!,The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to reinflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and ride!,Shorter Road version designed not to bottom out when used on narrower road slicks. For MTB tyres please use our MTB Air with a longer insertion tube to get past thicker MTB treads,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,CO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, it-Æs also a good idea to give the Air system a try at home before you need to do it 'in the field',Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouch,In addition, there-Æs an air hose for CO2 inflation if you just need to air up through the valve stem,Made with pride in the USA using patented technology and warrantied for life under normal usage,.MTBAn all in one tyre repair and reinflation solution, there is no faster way to get yourself back up and rolling than the Dynaplug Air,Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!,The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to reinflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and ride!,Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tube,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,CO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, it-Æs also a good idea to give the Air system a try at home before you need to do it 'in the field',Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouch,In addition, there-Æs an air hose for CO2 inflation if you just need to air up through the valve stem,Made with pride in the USA using patented technology and warrantied for life under normal usage.
Goodyear Newton Enduro Tubeless Rear MTB TyreThis mountain bike (MTB) tyre is designed for modern enduro racing and it's ready for the most demanding of course conditions. It features a Dynamic:Grip3 compound that uses triple3 density rubber to deliver balanced levels of grip and treadwear. Goodyear has also made this version specifically for your rear wheel with a rear tread pattern that focuses on acceleration and braking traction. Another highlight is its EN:Wall sidewall protection, which uses a Butyl insert to provide extra sidewall support while also protecting against cuts. In addition, its dual ply construction uses two layers of 120 TPI casing fabric to further enhance this model's enduro level protection and sidewall stiffness.Enduro Rear Tyre with Tubeless Complete DesignThe Newton MTR (Mountain Rear) is part of Goodyear's ultimate tyre package developed for gravity riding and racing. A tyre that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. It features a Tubeless Complete design that offers the same benefits as tubeless-ready (TLR) technology, while also maintaining inflation pressure better than a traditional TLR tyre. This means you'll also enjoy the ability to run lower tyre pressures for increased stability, comfort and fewer chances of flats or punctures.Features: Compound: Dynamic:Grip3 Compound Sidewall Protection: EN:Wall Casing: 2-Ply, 120TPI Use: Enduro Type: Clincher Rear specific tread Tubeless Ready: Yes ETRTO: 27.5x2.4" Option: 61-584; 27.5x2.6" Option: 66-584; 29x2.4" Option: 61-622 Single or Pair: Single rear tyre Weight: 27.5x2.4" Option: 1180gTechnologies: Dynamic:Grip3 Compound: Rear specific featuring triple3 density rubber compounds where necessary to offer balanced levels of grip and treadwear. Dual Ply Construction: Two layers of 120 TPI casing fabric provide enduro level protection and sidewall stiffness. Rear Specific Tread: Designed to bring up the rear, focusing on acceleration and braking traction. EN:Wall Sidewall Protection: EN:Wall Butyl insert providing extra sidewall support while aiding cut resistance. Tubeless Complete: Goodyear Bicycle Tyres proprietary design that features all the benefits of a Tubeless Ready (TLR) tyre but will also better maintain inflation pressure than a traditional TLR tyre.Manufacturer's Part Numbers: GR.014.61.584.V004.R Black 2.4" 27.5" GR.014.66.584.V004.R Black 2.6" 27.5" GR.014.61.622.V004.R Black 2.4" 29"Buy Goodyear Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Goodyear Newton Enduro Tubeless Rear MTB TyreThis mountain bike (MTB) tyre is designed for modern enduro racing and it's ready for the most demanding of course conditions. It features a Dynamic:Grip3 compound that uses triple3 density rubber to deliver balanced levels of grip and treadwear. Goodyear has also made this version specifically for your rear wheel with a rear tread pattern that focuses on acceleration and braking traction. Another highlight is its EN:Wall sidewall protection, which uses a Butyl insert to provide extra sidewall support while also protecting against cuts. In addition, its dual ply construction uses two layers of 120 TPI casing fabric to further enhance this model's enduro level protection and sidewall stiffness.Enduro Rear Tyre with Tubeless Complete DesignThe Newton MTR (Mountain Rear) is part of Goodyear's ultimate tyre package developed for gravity riding and racing. A tyre that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. It features a Tubeless Complete design that offers the same benefits as tubeless-ready (TLR) technology, while also maintaining inflation pressure better than a traditional TLR tyre. This means you'll also enjoy the ability to run lower tyre pressures for increased stability, comfort and fewer chances of flats or punctures.Features: Compound: Dynamic:Grip3 Compound Sidewall Protection: EN:Wall Casing: 2-Ply, 120TPI Use: Enduro Type: Clincher Rear specific tread Tubeless Ready: Yes ETRTO: 27.5x2.4" Option: 61-584; 27.5x2.6" Option: 66-584; 29x2.4" Option: 61-622 Single or Pair: Single rear tyre Weight: 27.5x2.4" Option: 1180gTechnologies: Dynamic:Grip3 Compound: Rear specific featuring triple3 density rubber compounds where necessary to offer balanced levels of grip and treadwear. Dual Ply Construction: Two layers of 120 TPI casing fabric provide enduro level protection and sidewall stiffness. Rear Specific Tread: Designed to bring up the rear, focusing on acceleration and braking traction. EN:Wall Sidewall Protection: EN:Wall Butyl insert providing extra sidewall support while aiding cut resistance. Tubeless Complete: Goodyear Bicycle Tyres proprietary design that features all the benefits of a Tubeless Ready (TLR) tyre but will also better maintain inflation pressure than a traditional TLR tyre.Manufacturer's Part Numbers: GR.014.61.584.V004.R Black 2.4" 27.5" GR.014.66.584.V004.R Black 2.6" 27.5" GR.014.61.622.V004.R Black 2.4" 29"Buy Goodyear Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Goodyear Newton Enduro Tubeless Front MTB TyreFeaturing a Dynamic:Grip3s compound, this enduro mountain bike (MTB) tyre uses Goodyear's softest triple3 rubbers to deliver exceptional grip as well as slow rebound properties. Designed specifically for your front wheel, its tread pattern is developed to smash turns, hold grip on off-camber sections and find that last little bit of traction on wet roots, dusty rocks and nasty turns. Another highlight is its EN:Wall sidewall protection, which uses a Butyl insert to provide extra sidewall support while also protecting against cuts. In addition, its dual ply construction uses two layers of 120 TPI casing fabric to further enhance this model's enduro level protection and sidewall stiffness.Enduro Front Tyre with Tubeless Complete DesignThe Newton MTF (Mountain Front) is part of Goodyear's range of mountain tyres developed for gravity disciplines. It features a Tubeless Complete design that offers the same benefits as tubeless-ready (TLR) technology, while also maintaining inflation pressure better than a traditional TLR tyre. This means you'll also enjoy the ability to run lower tyre pressures for increased stability, comfort and fewer chances of flats or punctures.Features: Compound: Dynamic:Grip3s Compound Sidewall Protection: EN:Wall Casing: 2-Ply, 120TPI Use: Enduro Type: Clincher Front specific tread Tubeless Ready: Yes ETRTO: 27.5x2.5" Option: 64-584; 29x2.5" Option: 64-622 Single or Pair: Single front tyre Weight: 27.5x2.5" Option: 1235g; 29x2.5" Option: 1300gTechnologies: Dynamic:Grip3s Compound: Front specific featuring Goodyear's softest triple3 compound rubbers to offer the ultimate in grip and slow rebound properties. Dual Ply Construction: Two layers of 120 TPI casing fabric provide Enduro level protection and sidewall stiffness. Front Specific Tread: Designed to smash turns, hold grip on off-camber sections and find that last little bit of traction. Sidewall Protection: EN:Wall butyl insert providing extra sidewall support while aiding cut resistance. Tubeless Complete: Goodyear Bicycle Tyres proprietary design that features all the benefits of a Tubeless Ready (TLR) tyre but will also better maintain inflation pressure than a traditional TLR tyre.Manufacturer's Part Numbers: GR.015.64.584.V004.R Black 2.5" 27.5" GR.015.64.622.V004.R Black 2.5" 29"Buy Goodyear Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Goodyear Newton Enduro Tubeless Front MTB TyreFeaturing a Dynamic:Grip3s compound, this enduro mountain bike (MTB) tyre uses Goodyear's softest triple3 rubbers to deliver exceptional grip as well as slow rebound properties. Designed specifically for your front wheel, its tread pattern is developed to smash turns, hold grip on off-camber sections and find that last little bit of traction on wet roots, dusty rocks and nasty turns. Another highlight is its EN:Wall sidewall protection, which uses a Butyl insert to provide extra sidewall support while also protecting against cuts. In addition, its dual ply construction uses two layers of 120 TPI casing fabric to further enhance this model's enduro level protection and sidewall stiffness.Enduro Front Tyre with Tubeless Complete DesignThe Newton MTF (Mountain Front) is part of Goodyear's range of mountain tyres developed for gravity disciplines. It features a Tubeless Complete design that offers the same benefits as tubeless-ready (TLR) technology, while also maintaining inflation pressure better than a traditional TLR tyre. This means you'll also enjoy the ability to run lower tyre pressures for increased stability, comfort and fewer chances of flats or punctures.Features: Compound: Dynamic:Grip3s Compound Sidewall Protection: EN:Wall Casing: 2-Ply, 120TPI Use: Enduro Type: Clincher Front specific tread Tubeless Ready: Yes ETRTO: 27.5x2.5" Option: 64-584; 29x2.5" Option: 64-622 Single or Pair: Single front tyre Weight: 27.5x2.5" Option: 1235g; 29x2.5" Option: 1300gTechnologies: Dynamic:Grip3s Compound: Front specific featuring Goodyear's softest triple3 compound rubbers to offer the ultimate in grip and slow rebound properties. Dual Ply Construction: Two layers of 120 TPI casing fabric provide Enduro level protection and sidewall stiffness. Front Specific Tread: Designed to smash turns, hold grip on off-camber sections and find that last little bit of traction. Sidewall Protection: EN:Wall butyl insert providing extra sidewall support while aiding cut resistance. Tubeless Complete: Goodyear Bicycle Tyres proprietary design that features all the benefits of a Tubeless Ready (TLR) tyre but will also better maintain inflation pressure than a traditional TLR tyre.Manufacturer's Part Numbers: GR.015.64.584.V004.R Black 2.5" 27.5" GR.015.64.622.V004.R Black 2.5" 29"Buy Goodyear Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
TT (time trial) stands for speed, lowest rolling resistance and minimum weight. The riding characteristic is nevertheless inimitably good. Folding tyre ADDIX Race compound Tubeless Easy (TLE) Colour: classic-skin (tan) Liteskin sidewalls Evolution line
The Ultra High Performance 4Seasons road tyreThe Vector 4Seasons Ultra High-Performance road tyre utilizes the latest developments in materials and construction methods to optimize performance and protection across a wide range of wet and dry conditions.Freedom to performRiding in less-than-ideal conditions should not require a complete sacrifice in tyre performance. The Vector 4Seasons brings ultra high performance to your daily ride, with low rolling resistance and added protection to keep you moving forward across a wide range of conditions.Performance over more conditionsThe Vector 4Seasons features bead to bead Armour protection, R:Shield under-tread breaker belt and Dynamic:Silica4 compound for improved wet grip and durability.ConstructionTubeless Complete™ - Goodyear Bicycle Tyres proprietary design that features all the benefits of a Tubeless Ready (TLR) tyre with additional air retention properties.A Multi-compound material layer is added to our high-pressure Road-UHP tyre casing allowing for improved air retention while providing additional puncture and cut protection with minimal weight increase. Our unique design means more sealant remains after installation, ready for the moment you need it.Recommended sealant quantity 30-50ml per tyre. Quantity will vary dependant on rim design and rim tape used.ProtectionArmour Protection - Combining excellent anti-cut properties with minimal impact on casing suppleness and weight. Armour Protection enhances the Vector 4Seasons UHP road tyre’s capabilities.CompoundDynamic:Silica4 - The Vector 4Seasons brings Goodyear Ultra High-Performance to a broader range of conditions with a reinforced casing, wider tread cap and dedicated Dynamic:Silica4 compounding to minimize rolling resistance while enhancing wet grip.Wet Grip | +8.7,Abrasion Resistance | +6.3%,Compound Puncture Resistance | +1.1%.% vs. standard compound Graphene up to 1 PHRKey Features:Proprietary design features all the benefits of a Tubeless Ready (TLR) tyre with additional air retention properties.,Multi-compound material layer is added, allowing for improved air retention as well as additional puncture and cut protection.,More sealant remains after installation, ready for the moment you need it.,Bead to bead Armour protection, R:Shield under-tread breaker belt and Dynamic:Silica4 compound for improved grip and durability.,Combining excellent anti-cut properties with minimal impact on casing suppleness and weight.,Armour Protection enhances the Vector 4Seasons UHP road tyre’s capabilities..
Bell 4Forty Helmet (MIPS)Heavyweight technology without putting the piggy bank at risk. The 4Forty Helmet (MIPS) from Bell rivals some of the high-end helmets at a fraction of the cost, punching above its weight to deliver incredible protection and safety on the trail.License To ThrillReady and waiting to kick up roost, the 4Forty Helmet is the ideal lid for pinning berms and flying into kickers. Not satisfied at just taking in the views, this safety-conscious helmet sports a Fusion In-Mould Polycarbonate Shell to absorb head impacts, should you ever suffer an unexpected fall that is. Ideal for shredding all forms of terrain, the 4Forty utilises extended rear coverage and an adjustable visor system to protect your eyes.MIPS (Multi-directional Impact Protection System)Made to meet and exceed international standards, Bell also turn to MIPS to add an extra layer of head protection to their 4Forty Air.The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool and ComfortableMaking sure performance isn’t compromised when the intensity of your ride heats up, the high-end breathability of the 4Forty ensures you stay cool and dry from the first pedal until the last. Fitted with built-in sweat guides and 15 individual vents, airflow is maximised around the head to fend off sweat while the lightweight feel of this Bell lid improves comfort. Thanks to the Fusion in-mould polycarbonate shell and sweat guide padding, you’ll find taking off the 4Forty MIPS Helmet a harder decision than whether or not to tackle that all-important booter.Features:Float Fit™Fusion In-Mould Polycarbonate ShellMIPS (Multi-directional Impact Protection System)Goggleguide™ Adjustable Visor SystemNo-Twist Tri-Glides™Sweat Guide™ PaddingSPECIFICATIONWEIGHT: 380 GramsVENTS: 15Shop all MIPS helmets - Click hereBuy Bell from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bell 4Forty Helmet (MIPS)Heavyweight technology without putting the piggy bank at risk. The 4Forty Helmet (MIPS) from Bell rivals some of the high-end helmets at a fraction of the cost, punching above its weight to deliver incredible protection and safety on the trail.License To ThrillReady and waiting to kick up roost, the 4Forty Helmet is the ideal lid for pinning berms and flying into kickers. Not satisfied at just taking in the views, this safety-conscious helmet sports a Fusion In-Mould Polycarbonate Shell to absorb head impacts, should you ever suffer an unexpected fall that is. Ideal for shredding all forms of terrain, the 4Forty utilises extended rear coverage and an adjustable visor system to protect your eyes.MIPS (Multi-directional Impact Protection System)Made to meet and exceed international standards, Bell also turn to MIPS to add an extra layer of head protection to their 4Forty Air.The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool and ComfortableMaking sure performance isn’t compromised when the intensity of your ride heats up, the high-end breathability of the 4Forty ensures you stay cool and dry from the first pedal until the last. Fitted with built-in sweat guides and 15 individual vents, airflow is maximised around the head to fend off sweat while the lightweight feel of this Bell lid improves comfort. Thanks to the Fusion in-mould polycarbonate shell and sweat guide padding, you’ll find taking off the 4Forty MIPS Helmet a harder decision than whether or not to tackle that all-important booter.Features:Float Fit™Fusion In-Mould Polycarbonate ShellMIPS (Multi-directional Impact Protection System)Goggleguide™ Adjustable Visor SystemNo-Twist Tri-Glides™Sweat Guide™ PaddingSPECIFICATIONWEIGHT: 380 GramsVENTS: 15Shop all MIPS helmets - Click hereBuy Bell from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bell 4Forty Helmet (MIPS)Heavyweight technology without putting the piggy bank at risk. The 4Forty Helmet (MIPS) from Bell rivals some of the high-end helmets at a fraction of the cost, punching above its weight to deliver incredible protection and safety on the trail.License To ThrillReady and waiting to kick up roost, the 4Forty Helmet is the ideal lid for pinning berms and flying into kickers. Not satisfied at just taking in the views, this safety-conscious helmet sports a Fusion In-Mould Polycarbonate Shell to absorb head impacts, should you ever suffer an unexpected fall that is. Ideal for shredding all forms of terrain, the 4Forty utilises extended rear coverage and an adjustable visor system to protect your eyes.MIPS (Multi-directional Impact Protection System)Made to meet and exceed international standards, Bell also turn to MIPS to add an extra layer of head protection to their 4Forty Air.The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool and ComfortableMaking sure performance isn’t compromised when the intensity of your ride heats up, the high-end breathability of the 4Forty ensures you stay cool and dry from the first pedal until the last. Fitted with built-in sweat guides and 15 individual vents, airflow is maximised around the head to fend off sweat while the lightweight feel of this Bell lid improves comfort. Thanks to the Fusion in-mould polycarbonate shell and sweat guide padding, you’ll find taking off the 4Forty MIPS Helmet a harder decision than whether or not to tackle that all-important booter.Features:Float Fit™Fusion In-Mould Polycarbonate ShellMIPS (Multi-directional Impact Protection System)Goggleguide™ Adjustable Visor SystemNo-Twist Tri-Glides™Sweat Guide™ PaddingSPECIFICATIONWEIGHT: 380 GramsVENTS: 15Shop all MIPS helmets - Click hereBuy Bell from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bell 4Forty Helmet (MIPS)Heavyweight technology without putting the piggy bank at risk. The 4Forty Helmet (MIPS) from Bell rivals some of the high-end helmets at a fraction of the cost, punching above its weight to deliver incredible protection and safety on the trail.License To ThrillReady and waiting to kick up roost, the 4Forty Helmet is the ideal lid for pinning berms and flying into kickers. Not satisfied at just taking in the views, this safety-conscious helmet sports a Fusion In-Mould Polycarbonate Shell to absorb head impacts, should you ever suffer an unexpected fall that is. Ideal for shredding all forms of terrain, the 4Forty utilises extended rear coverage and an adjustable visor system to protect your eyes.MIPS (Multi-directional Impact Protection System)Made to meet and exceed international standards, Bell also turn to MIPS to add an extra layer of head protection to their 4Forty Air.The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool and ComfortableMaking sure performance isn’t compromised when the intensity of your ride heats up, the high-end breathability of the 4Forty ensures you stay cool and dry from the first pedal until the last. Fitted with built-in sweat guides and 15 individual vents, airflow is maximised around the head to fend off sweat while the lightweight feel of this Bell lid improves comfort. Thanks to the Fusion in-mould polycarbonate shell and sweat guide padding, you’ll find taking off the 4Forty MIPS Helmet a harder decision than whether or not to tackle that all-important booter.Features:Float Fit™Fusion In-Mould Polycarbonate ShellMIPS (Multi-directional Impact Protection System)Goggleguide™ Adjustable Visor SystemNo-Twist Tri-Glides™Sweat Guide™ PaddingSPECIFICATIONWEIGHT: 380 GramsVENTS: 15Shop all MIPS helmets - Click hereBuy Bell from Chain Reaction Cycles, the World's Largest Online Bike Store.
BUILT TO PERFORM Built with the same core design principles as the pro-level Z20, the Stratus combines lightweight aero efficiency with cutting-edge comfort technologies. The shape was refined for all-around road performance—ventilated for long climbs but still fast for the flats—and the integrated Float Fit system offers comfort and security with a streamlined fit and an oversized dial that’s easy to adjust with one hand. The Overbrow Ventilation system pulls cool air in through the front and pushes it through an air-channel matrix to reduce overheating. And thanks to the adjustable No-Twist Tri-Glides, the straps stay flat and properly positioned no matter how hard you’re hammering. This model also includes MIPS (Multi-Directional Impact Protection System) for added protection in certain types of impacts. FEATURES Integrated MIPS (Multi-Directional Impact Protection System) - MIPS is designed to reduce rotational forces that can result from certain impacts. By integrating the MIPS slip plane into the retention system, we are able to reduce complexity and weight for a compact, better ventilated helmet that fits more closely to the head. Fusion In-Mold polycarbonate shell - A process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. Lightweight internal polycarbonate roll cage Float Fit (integrated with MIPS) Overbrow Ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation 18 vents No-Twist Tri-Glides: Quick-adjust fasteners that help keep straps flat and properly positioned Lightweight straps Sweat Guide pad design pulls moisture away from the brow pad and away from eyewear CE EN1078 certified CONSTRUCTION Fusion In-Mold polycarbonate shell - A process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. Lightweight internal polycarbonate roll cage FIT SYSTEM Float Fit - A minimalist, lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments (integrated with MIPS) No-Twist Tri-Glides: Quick-adjust fasteners that help keep straps flat and properly positioned Lightweight straps