Sleeves snap on to the next gen candy and eggbeaters to tighten the interface between the shoe and pedal. Includes: 1mm 2mm 3mm sleeves Compatible with candy and eggbeater 11 3 and 2
The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 278g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: cast stainless steel Spring: 300 series stainless steel Inner bearing: Needle Outer bearing: Cartridge Maximum rider weight: No restrictions Colours options: Silver/Blue or Silver/Red You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 286g per pair Spindle: Forged scm435 chromoly steel Body: stamped steel Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Silver/Black or Silver/Red As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 280g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: stamped stainless steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Special edition colours: Silver/Black You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
A comfy t-shirt to wear your passion and support your team everywhere.Smooth, 100% organic cotton, regular fit. Weight:167g
A comfy t-shirt to wear your passion and support your team everywhere.Smooth, 100% organic cotton, regular fit. Weight:167g
Our brand new Venturi STC is an evolution of our much loved speed machine. We knew nothing had to be revolutionised with this bike so we have kept the geometry and handling that makes the Venturi so easy to ride and updated the frame and cockpit to make it even better. We now have a fully integrated cockpit on every model for improved front-end aero performance and a clean look.The Venturi is an aerodynamically optimised frame that rewards you with brilliant speed. This is a bike that encourages you to ride fast but lets you cruise in comfort when you want to calm things down. The Prologo, BlkTec and Shimano kit ensure every contact point is a joy to use throughout your ride.The next generation of the Venturi STC has fully integrated cables through the bar and stem on every model. This has enhanced aerodynamic performance by reducing drag coefficient while emphasizing the clean lines and frame finish. Our integrated design is flexible so you can upgrade easily at a later date, or change to a completely different bar and stem set up depending on your needs. This model features frame size specific BLK TEC carbon fibre cockpit components.
Our brand new Venturi STC is an evolution of our much loved speed machine. We knew nothing had to be revolutionised with this bike so we have kept the geometry and handling that makes the Venturi so easy to ride and updated the frame and cockpit to make it even better. We now have a fully integrated cockpit on every model for improved front-end aero performance and a clean look.The Venturi is an aerodynamically optimised frame that rewards you with brilliant speed. This is a bike that encourages you to ride fast but lets you cruise in comfort when you want to calm things down. The Prologo, BlkTec and Sram kit ensure every contact point is a joy to use throughout your ride.
The Crank Brothers Eggbeater 3 clipless pedal provides the form and function of Crank Brother's exclusive four-sided entry, at a price that allows you to outfit any bike. Four-sided open design ensures quick and easy engagement every time as well as shedding mud build up fast making it perfect for XC, trail riding and cyclo-cross, be it racing or training.Key Features:Minimal & lightweight, the lightest Mountain Bike pedals in the world,Customizable float and release angle, to suit any rider,Premium bearings and Hex alloy endcap, make it easy to service the pedals,Double seal system,Traction pad compatible (1mm set included),Weight: 278g per pair,.
crankbrothers Eggbeater 1 Mountain Bike PedalsEngineered to tackle tough mountain bike trails, the Eggbeater 1 Mountain Bike Pedals from crankbrothers features a lightweight, durable stamped steel construction and a long-lasting Chromoly (CrMo) spindle for unrivalled performance.Features: Stamped steel body and inner wing with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and outer bearings Plastic end cap Brass cleat and mounting hardware included Body Material: Stamped SteelSpindle: Forged CrMo steelBody & Wings: Stamped steelSpring: 300 series stainless steelInner Bearing: BushingOuter Bearing: CartridgeCleats: Premium brass cleats includedRelease Angle: 15 or 20 degreesWeight: 290gBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Eggbeater 1 Mountain Bike PedalsEngineered to tackle tough mountain bike trails, the Eggbeater 1 Mountain Bike Pedals from crankbrothers features a lightweight, durable stamped steel construction and a long-lasting Chromoly (CrMo) spindle for unrivalled performance.Features: Stamped steel body and inner wing with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and outer bearings Plastic end cap Brass cleat and mounting hardware included Body Material: Stamped SteelSpindle: Forged CrMo steelBody & Wings: Stamped steelSpring: 300 series stainless steelInner Bearing: BushingOuter Bearing: CartridgeCleats: Premium brass cleats includedRelease Angle: 15 or 20 degreesWeight: 290gBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Eggbeater 2 MTB PedalsThe Eggbeater 2 pedal is slightly lighter than its brother the Eggbeater 3. Features Crank Brother's exclusive, four-sided entry, mud shedding design, and weight saving minimalism.Features: Cast stainless body and spring with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and cartridge bearing outer Plastic end caps Brass cleat and mounting hardware included Weight: 272g/pair Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.