There aren’t many times a replacement part actually improves your bike but put one on your bike and you’ll wonder why you didn’t install a NINJA sooner. The bearings are housed in an alloy shell and wrapped with plastic and fibre. This fusion of the three materials provides the bearings a solid platform to sit on and extends their lives. A lot of people would be satisfied with this, but they went even further by extending the alloy shell so the right and left sides lock together. This locks the frame, cranks and bottom bracket together and provides unparalleled stiffness.
Unique CeramicSpeed ceramic bearings are premium quality, out-performing mark rivals. The CeramicSpeed Ceramic Bottom Bracket system is so stiff and efficient that additional spacers are not required. At a fantastically lightweight of 84 grams, this CeramicSpeed Ceramic Bottom Bracket is a premium upgrade that your trusty steed deserves.
These smooth rotating and fully sealed angular contact Ritchey Pro Headset Bearings are supplied in bags of two (except the 1.1/8” to 1/5” tapered option which will be supplied as a single unit). Additional Specifications: Dimensions: 1.1/8" - 1.5" Taper Option Outer: 51.9mm; Inner: 40.0mm: Thickness: 8mm 1.1/8" - 41.0mm Option: Outer: 41.0mm; Inner: 30.5: Thickness: 7mm 1.1/8" - 41.8mm Option: Outer: 41.8mm; Inner: 30.5: Thickness: 8mm Manufacturer’s Part Numbers: 1.1/8" - 1.5" Taper Option: 55040007004 1.1/8" - 41.0mm Option: 55440007001 1.1/8" - 41.8mm Option: 55340007001
A direct replacement for the bearings found in Nukeproof BSA & pressfit Hollowtech II / GXP bottom brackets, these bearings have a titanium coating which is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. The ti (titanium) coating helps prevent rust and damage from external elements. These MR2437 bearings are ABEC 5 certified and will suit all Nukeproof BSA & pressfit Hollowtech II / GXP bottom brackets as well as any other bottom bracket requiring a MR2437 bearing. Please Note: To use with a GXP crankset, you will need to reuse the adapter you will currently have fitted in the non-driveside bearing. Click here to view the Nukeproof Step by Step How to Guide for Bearing Replacement.
The bearings have a titanium coating which is applied in a vaporised vacuum environment, this allows its structure and density to be fine-tuned. The ti (titanium) coating helps prevent rust and damage from external elements. The bearings are ABEC 5 certified and suit Nukeproof DUB bottom brackets as well as any other bottom requiring a 29x40x6.8mm bearing. For step-by-step fitting instructions click here.
These bearings have a titanium coating which is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. The ti (titanium) coating helps prevent rust and damage from external elements. The 6806 bearings are ABEC 5 certified and suit Nukeproof 30mm bottom brackets as well as any other bottom bracket requiring a 6806 bearing. Please note: These bearings must be installed with the black seal facing outwards. For step-by-step fitting instructions click here.
The ABEC3 7902 1ZS Max raises the bar for military standard, high precision bearings. This MAX model was engineered without retainers and 40% more balls than standard ABEC 3 or 5 bearings, enabling them to carry a much higher load and perfect for frame pivots. This bearing is packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last longer than ever before. Technologies: CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions.
The ABEC3 698 LLU Max raises the bar for military standard, high precision bearings. This MAX model was engineered without retainers and 40% more balls than standard ABEC 3 or 5 bearings, enabling them to carry a much higher load and perfect for frame pivots. This bearing is packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last longer than ever before. Technologies: LLU Seals: Two NBR 70 rubber seals with medium/high contact seal, which rides in a matching groove machined into the bearing to make a labyrinth type seal. The outer sealing lip repels dirt and water while the inner sealing lip retains the grease. CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions.
The ABEC3 6904 2RS raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: 2RS: Literally means the bearing has Two Rubber Seals. There are many types of seals. On most other bearings 2RS means that the seal is made from rubber and has one sealing lip rubbing on any flat part of the inner race. Enduro’s seals are usually either LLU (usually the MAX type bearings) or LLB (better for hubs). Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
The ABEC3 6804 LLU Max raises the bar for military standard, high precision bearings. This MAX model was engineered without retainers and 40% more balls than standard ABEC 3 or 5 bearings, enabling them to carry a much higher load and perfect for frame pivots. This bearing is packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last longer than ever before. Technologies: LLU Seals: Two NBR 70 rubber seals with medium/high contact seal, which rides in a matching groove machined into the bearing to make a labyrinth type seal. The outer sealing lip repels dirt and water while the inner sealing lip retains the grease. CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions.
The ABEC3 608 LLU Max raises the bar for military standard, high precision bearings. This MAX model was engineered without retainers and 40% more balls than standard ABEC 3 or 5 bearings, enabling them to carry a much higher load and perfect for frame pivots. This bearing is packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last longer than ever before. Technologies: LLU Seals: Two NBR 70 rubber seals with medium/high contact seal, which rides in a matching groove machined into the bearing to make a labyrinth type seal. The outer sealing lip repels dirt and water while the inner sealing lip retains the grease. CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions.
The ABEC3 7902 2RS Max raises the bar for military standard, high precision bearings. This MAX model was engineered without retainers and 40% more balls than standard ABEC 3 or 5 bearings, enabling them to carry a much higher load and perfect for frame pivots. This bearing is packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last longer than ever before. Technologies: 2RS: Literally means the bearing has Two Rubber Seals. There are many types of seals. On most other bearings 2RS means that the seal is made from rubber and has one sealing lip rubbing on any flat part of the inner race. Enduro’s seals are usually either LLU (usually the MAX type bearings) or LLB (better for hubs). CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions.