RapidRacerProducts Bearing Press & Extraction ToolPerfect for experienced home mechanics, the Bearing Press & Extraction Tool (BPET) will accurately install and remove frame linkage bearings. In addition, it can also be used for many types of pivot and hub bearings. (Adaptors and kits are being developed for hubs and pivot bearings)Instructions for UseFirstly, ensure you have the correct RRP Bearing Kit to match the bearings you intend to insert/extract. You can identify which kit you need either by reading the bearing number written on the rubber seal, or you can measure the inner bore race and outer race of the bearing.NOTE: Extracting Bearings (RED adaptors) and Inserting Bearings (BLUE adaptors) - SOLD SEPARATELYFeatures: The BPET is only suitable for frames with flat surfaces to press against Ideal for the competent home mechanic who has reasonable knowledge and experience of working on bikes Designed to extract and insert linkage bearings Tool can also be used to press and extract bearings on hubs and freehub bodiesPlease Note: The handle arms have been reduced in length and thickness to decrease the torque available reducing the risk of damage from misalignment/incorrect installation.)Buy RapidRacerProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
Pin Tool for Remove/Replace Lefty Cap on Cannondale Lefty Hubs.
Park Tool Campag Crank & Bearing Tool Set (CBP-8)The Campag Crank & Bearing Tool Set CBP-8 features everything you need to safely and efficiently remove and install on Campagnolo and Fulcrum Ultra-Torque and Power Torque crank and bottom bracket systems. Safe Removal and Installation of Cranks and Bottom BracketsThe CBP-8 includes a crank puller for aluminium and carbon fibre Power Torque systems, a bearing puller for Power Torque and Ultra Torque systems and a bearing setter for both systems, making the job of replacing your cranks and BBs less labour intensive. Also included in the set are: Removal adaptor for Power Torque crank bearings Removal protection pads for use with carbon cranks Removal protection adaptor for use with aluminium crank arms Crank removal extension plug for Power Torque Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Campag Crank & Bearing Tool Set CBP-8 comes equipped with everything you need to get to work on your specialised cranks and bearings, taking them off and putting them back firmly and safely to keep your pedalling in peak condition. The set features a Power Torque compatible crank puller, crank removal extension plug and crank bearing removal adaptor as well as a bearing puller and setter which will also work with Ultra-Torque systems. Completing the set are protective pads and adaptors for use with both carbon and aluminium cranks, making it just the job for an often arduous task.
Like Ceramic Hybrid, Zero Ceramic use a combination of ceramic (Silicon Nitride - Si3n4) balls and steel races, except they are of higher Grade 3 quality. The races are also black oxide treated and ground to a mirror finish which prevents corrosion and provides near perfect efficiency and tolerances.Key Features: Bearing Code: 6805, Dimensions: 25 x 37 x 7mm, ABEC: 5, Grade: 3, Seals: VV, Grease: Kyodo Yushi PS-2, Application: Hubs, Bottom Brackets, Weight: 18.74g.
Acros Canyon Aeroad CF Headset Bearing SetSpecifically designed for use with Canyon Aeroad CF bikes, this headset bearing set allows you to upgrade your old or worn-out existing bearings. Easy to install, this bearing set attaches to your Canyon Aeroad CF frame's headset. Coming complete with two bearings and one compression ring, this is a perfect choice of upgrade for breathing new life back into your headset. Features: Bike Compatibility: Canyon Aeroad CF Includes: 2x bearings (1x upper and 1x lower); 1x compression ring Part Number: 5652951Buy Acros Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bearing Set for the ACROS Ai-70 Fiber Canyon / i-LockIncludes:2x Bearings ( 1x Upper, 1x Lower part),1x compression ring.
RRP BEARING PRESSPLEASE NOTE THAT ALL ADAPTORS FOR THIS PRESS ARE SOLD SEPERATELY DUE TO THE LARGE VARIETY OF OPTIONSDesigned for the home mechanic. This simple and effective bearing press will extract and insert linkage bearings with ease. Thanks to a CNC construction this tool is ultra durable. A wide range of adaptors are available to suit almost any linkage bearing. (Sold Separately see below)The bearing press and adaptors are supplied separately so you can customize the bearing press kit to suit your requirements for greater value for money. Adaptor kits are supplied with full extraction and insertion fittings.For more information on adaptor kits see the size guide tabExtracting Bearings (RED adaptors) - SOLD SEPARATELYPlace the RED adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage.Wind on the main handle until the parts all come together make a final check that everything is aligned properly. Continue to wind on the main handle which will allow the male adaptor to pull on the inner race of the bearing and extract it into the female adaptor cup (NB: The male adaptor passes through the female adaptor to ensure a uniform and true extraction*) it will become harder to turn once the bearing starts to extract. After a couple of turns stop and check that the bearing is extracting properly before continuingInserting Bearings (BLUE adaptors) - SOLD SEPARATELYPlace the BLUE adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame.Wind on the main handle until all the parts come together the male adaptor should be pressing on the outer race of the bearing you are inserting. Make a final check that everything is all aligned. Continue to wind on the main handle the male adaptor will press onto the outer race of the bearing and insert it (NB: The male adaptor passes through the female adaptor to ensure a uniform and true insertion*) it will become harder to turn once the bearing starts to insert. After a couple of turns stop and check that the bearing is inserting properly before continuingGeneral InformationALL BEARING KIT ADAPTORS ARE SOLD SEPARATELY.The BPET is only suitable for frames with flat surfaces to press against. This tool is designed for the competent home mechanic who has reasonable knowledge and experience of working on bikes. This tool is designed to extract and insert linkage bearings however the tool can also be used to press and extract bearings on hubs and freehub bodies(NB: the handle arms have been reduced in length and thickness to decrease the torque available reducing the risk of damage from misalignment / incorrect installation)*Bearing Kits 1 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing bore hole
A quick and easy way to remove bearings from press fit type bottom brackets with an inside diameter of 37-41 mm (BB90 BB92 Shimano Press Fit SRAM Press Fit GXP)The BBT-90 works similar to a small head cup remover to safely extract low profile bearings from inside the bottom bracket shell as the tool slides through the shell it expands behind the bearing once the tool is in place the bearing is removed by tapping on the top cap with a hammer such as the Park HMR-3The BBT-90.3 set also includes installation cups to be used in conjunction with the Park Tool HHP-1 2 or 3 Headset Cup Press to quickly and precisely press the bearings into the bottom bracket shell
BB30 service kit with 2 clips and 2 6806 angular contact Enduro bearings
Like Ceramic Hybrid, Zero Ceramic use a combination of ceramic (Silicon Nitride - Si3n4) balls and steel races, except they are of higher Grade 3 quality. The races are also black oxide treated and ground to a mirror finish which prevents corrosion and provides near perfect efficiency and tolerances.Key Features: Bearing Code: MR 2437, Dimensions: 24 x 37 x 7mm, ABEC: 5, Grade: 3, Seals: VV, Grease: Kyodo Yushi PS-2, Application: Hubs, Bottom Brackets, Weight: 18.86g.
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturers entry level bearing.Enduro were the first company to produce a truly sealed full ceramic bearing and this selection for your bike will make it run like a dream.NB: Sold Individually, not as a pair