Ceramic Hybrid combines the chromium steel races found in Enduro's ABEC 5 range with Grade 5 ceramic (Silicon Nitride - Si3n4) balls found in Zero Ceramic bearings. This combination creates a lighter, more efficient and more affordable ceramic bearing, perfect for use in hubs or bottom brackets. The low contact LLB seals provide protection from water or dirt ingress, but without causing any friction or drag.Key Features: Bearing Code: MR 2437,Dimensions: 24mm x 37mm x 7mm,ABEC: 5,Grade: 5,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 18.86g.
Enduro's ABEC 5 is the next performance step up from the popular ABEC 3 range. By using military level, high precision HRC-64 hardended Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races. This combination allows Enduro's ABEC 5 bearings to use tolerances twice as tight as ABEC 3, and operate without any noise. The Graphite/Nylon ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of the bearing.Key Features: Bearing Code: 7803 (71803),Dimensions: 17mm x 26mm x 5mm,ABEC: 5,Grade: 5,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 7.60g.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6806, Dimensions: 30mm x 42mm x 7mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 21.25g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features: Bearing Code: 6202, Dimensions: 15 x 35 x 11mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 30.25g .
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Bearing Code: F6802 LLU MAX-E BO, Dimensions: 15 x 24/26 x 5/7mm, ABEC: 3, Grade: 10, Seals: LLU, Grease: CRC Marine, Application: Frame Pivots , .
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.Key Features: Bearing Code: 36 x 45, Dimensions: 30.2 x 41 x 6.5mm, Contact Angle: Inner 36 degree, Outer 45 degree, ABEC: 3, Grade: 10, Seals: LLB, Grease: Kyodo Yushi PS-2, Application: Hubs, Bottom Brackets, Weight: 19.24g.
Key Features: The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots,A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters,Combined with our proven bearing press design, the SBK-1 quickly and easily pushes ,the old bearing out of the linkage, and reinstalls the new bearing precisely and squarelyOrganized in a convenient storage case to keep everything in one place,NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.
Look keo blade carbon ceramic bearing ti axle with keo cleat 16nm with 12nm spare.Blade carbon pedalOur elite-level, top-of-the-range weapon designed for pure racing performance. The unique, patented blade technology is combined with the unequaled properties of ceramic bearings and look’s signature power-to-weight ratio, ensuring the pedal comes straight in as a reference on the market.CeramicFaster - longerEvery component, every ball is meticulously selected to ensure the highest level of quality and performance. The balls are precisely calibrated one by one by a machine, down to the micrometer. They are then ordered according to size in perfectly-adapted rings, with the result that every bearing has a totally unique structure.Longer lifeA long lifespan is the main advantage of ceramic bearings. Rounder and harder than traditional balls, they are less sensitive to dust or deposits and guarantee consistent, durable performance. Furthermore, ceramic is not subject to corrosion. These physical properties ensure the bearings have a lifespan 4 to 6 times longer than standard steel bearings.SmootherReduced friction is the best-known and most characteristic advantage of ceramic bearings. The perfectly circular shape and the hardness of the balls combined with ceramic-specific, optimized greases allows for an 18% reduction of the frictional forces applied to the bearing.SpindleIn order to meet the requirements of the most demanding cyclists, the blade carbon pedals are designed to resist the very worst weather conditions. Particular care is given to each component within the axle to ensure optimal lifespan. The axle is guaranteed waterproof by ipx7 (full immersion) and ipx6 (rotating pedal exposed to water jets) tests. The design of the outer cap and the inside nut have been revised to meet these requirementsBlade technologyLighter – aerodynamic - saferThe use of a carbon blade instead of a conventional metal spring offers numerous advantages:The “blade – lever” system is 20% lighter than a standard “spring – lever” system.The carbon blade blends fluidly into the shape and volume of the pedal, improving the overall aerodynamic properties of the product.The blade technology revolutionizes the engagement/ disengagement experience whilst offering firm and secure support. The bowing of the blade when unclipping means the required disengagement torque is reached more rapidly in the dynamic of the movement, allowing for faster cleat release. Pedaling experience is also improved thanks to a firmer lateral stop.The carbon blade is available in various stiffness options: 12, 16 or 20. The blade can be easily, intuitively and quickly (a few seconds suffice) changed depending on the rider’s clip-in / clip-out preferences.Technology: blade,Retention: serial installed in 16 + additional 12 in box 20 sold separately,Body: carbon,Traction: carbon,Spindle: titanium,Bearings: ceramic,Platform area: 700 mm²,Platform width: 67mm,Q factor: 53mm,Stack height + cleats: 14,8 mm ( 8,5 + 6,3 mm ),Weight (pedal): 95g,Weight pair + cleats: 260g,.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6802, Dimensions: 15mm x 24mm x 5mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 6.71g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 699,Dimensions: 9 x 20 x 6mm,ABEC: 5 ,Grade: 5,Seals: LLB,Grease: CRC Marine,Application: Frame Pivots,Weight: 7.10g.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6900, Dimensions: 10mm x 22mm x 6mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 9.40g.
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features:Bearing Code: KP 5A,Dimensions: 5/16" x 13/16" x 9/32",ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 9.69g.