The OMM Women's Bearing Short Sleeve Tee is a technical design that cares for your skin and comfort even in high intensity activity and multi day racing. Crafted with a Coolplus polyester fabric with four-way stretch, it is highly wicking and allows a free range of movement when on the go, while flatlock seams minimise rub points across the shoulders and back. Plus, Polygiene antibacterial and odour technology keeps you dry and fresh and SPF 50 protection ensures harmful rays are kept at bay.
Simple and great value for money! The HHP-3 is designed to install all sizes of head cups and one-piece bottom bracket cups into frames. Prolong the life of your bearings by installing them correctly from the start Made in the USA and covered by Park Tool's legendary limited lifetime warranty
Key Features: The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups and adaptors,The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact,Also included are eight installation drifts for pressing bearings into pre-installed cups,Organized in a convenient storage case,Full list of compatible bearing inner/outer diameters found on instructions/parts diagram,NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for useMade in the USA and covered by Park Tool's legendary limited lifetime warranty.
Key Features:Designed and built to install and remove BB30 bearings,The BBT-30.4 features a bushing set used in conjunction with a head cup press to quickly and precisely press the BB30 and PF30 bearings into the bottom bracket shell,The included BB30 bearing remover works from inside the shell to easily push out bearings,Updated to also remove PressFit 30 (PF30), EVO 386, BBright-Ö and PF121,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
A quick and easy way to remove bearings from press fit type bottom brackets with an inside diameter of 37-41 mm (BB90 BB92 Shimano Press Fit SRAM Press Fit GXP)The BBT-90 works similar to a small head cup remover to safely extract low profile bearings from inside the bottom bracket shell as the tool slides through the shell it expands behind the bearing once the tool is in place the bearing is removed by tapping on the top cap with a hammer such as the Park HMR-3The BBT-90.3 set also includes installation cups to be used in conjunction with the Park Tool HHP-1 2 or 3 Headset Cup Press to quickly and precisely press the bearings into the bottom bracket shell
Park Tool Bearing Cup Press HHP-2A multi-purpose, quick-release device for fast and easy installation and removal, The Park Tool Bearing Cup Press HHP-2 offers fantastic leverage and accuracy when aligning and pressing headsets and cartridge cups in to place. Accurate and Efficient Pressing ToolThe ideal implement for aligning and pressing 1", 1 ⅛", 1 ¼", and 1.5" headset cups, this Park Tool press will also securely fit cartridge bearings and cups firmly in to one-piece bottom bracket shells. Featuring extra long handles for exceptional leverage when loosening and tightening and stepped bushings to ensure the perfect cup alignment is achieved, the HHP-2 can also be used for keeping fixed cup wrenches secure while your remove or install adjustable-type BBs. The Bearing Cup Press HHP-2 is a brilliant bit of kit for all of your pressing needs. Features: Compatibility: 1", 1⅛", 1¼", and 1.5" Headset Cups Maximum Working Length: 315 mm Inlcuded with Press: 530-2 Adaptors for Aligning 1" and 1-1/8" Pressed Headsets (Stepped At 25.7, 29.7, and 32.8 mm)Buy Park Tool Workshop Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
Park Tool Campag Crank & Bearing Tool Set (CBP-8)The Campag Crank & Bearing Tool Set CBP-8 features everything you need to safely and efficiently remove and install on Campagnolo and Fulcrum Ultra-Torque and Power Torque crank and bottom bracket systems. Safe Removal and Installation of Cranks and Bottom BracketsThe CBP-8 includes a crank puller for aluminium and carbon fibre Power Torque systems, a bearing puller for Power Torque and Ultra Torque systems and a bearing setter for both systems, making the job of replacing your cranks and BBs less labour intensive. Also included in the set are: Removal adaptor for Power Torque crank bearings Removal protection pads for use with carbon cranks Removal protection adaptor for use with aluminium crank arms Crank removal extension plug for Power Torque Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Campag Crank & Bearing Tool Set CBP-8 comes equipped with everything you need to get to work on your specialised cranks and bearings, taking them off and putting them back firmly and safely to keep your pedalling in peak condition. The set features a Power Torque compatible crank puller, crank removal extension plug and crank bearing removal adaptor as well as a bearing puller and setter which will also work with Ultra-Torque systems. Completing the set are protective pads and adaptors for use with both carbon and aluminium cranks, making it just the job for an often arduous task.
The Park Tool HHP3 Home Mechanic Bearing Cup Press is a simple and economical home mechanics tool. The HHP3 is designed to install all sizes of head cups and one-piece bottom bracket cups.
Simple and great value for moneyThe HHP-3 is designed to install all sizes of head cups and one-piece bottom bracket cups into framesProlong the life of your bearings by installing them correctly from the start