Schwalbe Thunder Burt Addix LiteSkin MTB TyreThe Schwalbe Thunder Burt Addix MTB Tyre is the fastest rolling tyre made by Schwalbe that is intended for Off Road riding. Offering extremely low rolling resistance and being very light.Low Profile, Fast Rolling GripThe tread pattern comprises of a central section with a higher than normal amount of flat, small central studs; providing low profile, fast rolling grip. The outer studs have a wide profile to aid grip when cornering, but will not have any effect on rolling speed or efficiency on straighter flowing sections of the Trail.Here is a comparison between the ADDIX compounds that shows how they improve performance in relation to the VertStar, TrailStar and PaceStar Compounds.Features:Compound: ADDIX SpeedConstruction: LiteSkinExecution: XC, MarathonSidewall Protection: LiteEPI: 127Ideal Terrain: Hard pack, mix,Bead Type: FoldingTyre Pressure: 2.00 - 4.00 Bar (30 - 55 psi)Weight: 435g (29 x 2.10")Technologies: ADDIX Speed: The compound ideally suited to XC Race specialists rolls even better than the previous PaceStar compound and has a considerably extended service life. LiteSkin: These tyres can also be converted to Tubeless by using a liquid sealant. However, it cannot be guaranteed that when LiteSkin tyres used with commercially available sealants will be safely and permanently sealed or offer the same performance as TL Easy models. Evo Line: The very best possible, highest-grade materials available, combined with the latest technology to create the highest standard in Schwalbe tyre creation and construction.Buy Schwalbe Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Schwalbe Winter Spike K-Guard Road TyreEnjoy a lower rolling resistance and exceptional grip in winter weather, thanks to the Winter Spike K-Guard Road Tyre from Schwalbe. With half the number of spikes, reflective lines and a durable K-Guard protection, it offers exceptional security when road cycling in frosty conditions.Features:Tyre Type: ClincherBead Type: WireCompound: WinterPuncture Protection: K-GuardSpikes: 118Skin: TwinMaximum load: 75kgCasing: 50 TPITubeless Compatible: NoPressure Range: 26x1.75": 2-5 Bar (30-70 PSI); 700x30c: 3.5- 6.5 Bar (50-95 PSI); 700x40c: 2-5 Bar (30-70 PSI); 700x35c: 2.5-6 Bar (35-85 PSI); 28x1.1/2": 2.5-5 Bar (35-70 PSI)Size/Width: 26x1.75"; 700x30c; 700x40c; 700x35c; 28x1.1/2 Weight: 26x1.75": 1000g; 700x30c: 805g; 700x40c: 905g; 700x35c: 870g; 28x1.1/2": 925gPlease Note: The 28x1.1/2" size option will not fit modern 700c wheels as it has a larger inner diameter. 700c wheels have an ETRTO of 622mm, whereas 28" wheels have an ETRTO of 635mm.TechnologiesK-Guard: An extremely cut-resistant high-tech fibre makes it possible to ensure, even on very light tyres, an extraordinarily high level of puncture resistance. In combination with SnakeSkin sidewall protection, Schwalbe call it Double Defense Technology.Active Line: The basis for all Active Line tyres is the high-quality 50 EPI carcass. Schwalbe no longer produce tyres with a coarse 20 or 24 EPI carcass. In addition, K-Guard provides effective puncture protection for Active Line tyres.Buy Schwalbe Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Schwalbe Winter Spike K-Guard Road TyreEnjoy a lower rolling resistance and exceptional grip in winter weather, thanks to the Winter Spike K-Guard Road Tyre from Schwalbe. With half the number of spikes, reflective lines and a durable K-Guard protection, it offers exceptional security when road cycling in frosty conditions.Features:Tyre Type: ClincherBead Type: WireCompound: WinterPuncture Protection: K-GuardSpikes: 118Skin: TwinMaximum load: 75kgCasing: 50 TPITubeless Compatible: NoPressure Range: 26x1.75": 2-5 Bar (30-70 PSI); 700x30c: 3.5- 6.5 Bar (50-95 PSI); 700x40c: 2-5 Bar (30-70 PSI); 700x35c: 2.5-6 Bar (35-85 PSI); 28x1.1/2": 2.5-5 Bar (35-70 PSI)Size/Width: 26x1.75"; 700x30c; 700x40c; 700x35c; 28x1.1/2 Weight: 26x1.75": 1000g; 700x30c: 805g; 700x40c: 905g; 700x35c: 870g; 28x1.1/2": 925gPlease Note: The 28x1.1/2" size option will not fit modern 700c wheels as it has a larger inner diameter. 700c wheels have an ETRTO of 622mm, whereas 28" wheels have an ETRTO of 635mm.TechnologiesK-Guard: An extremely cut-resistant high-tech fibre makes it possible to ensure, even on very light tyres, an extraordinarily high level of puncture resistance. In combination with SnakeSkin sidewall protection, Schwalbe call it Double Defense Technology.Active Line: The basis for all Active Line tyres is the high-quality 50 EPI carcass. Schwalbe no longer produce tyres with a coarse 20 or 24 EPI carcass. In addition, K-Guard provides effective puncture protection for Active Line tyres.Buy Schwalbe Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Fits under helmet,Reflective details,Main: 84% Polyamide, 16% Elastane,Insert: 65% Polyester, 15% Elastane, 20% Polyurethane.
SDG Components Bel Air SL I-Beam SaddleBel-Air saddles are the modern classics giving ultimate comfort, support and control. The Bel Air super light (SL) I-Beam saddle uses nylon glass fibre in a solid beam design, with a honeycomb structured core for the lightest strength to weight connection possible. The Bel-Air SL uses the lightest EVA foam available, and is strategically designed with a rear rise which helps rotate the pelvis forward and can give extra support for one who likes to use the saddle's Optimal Rideable Area (ORA). The Bel-Air SL incorporates a 3/4 cut design for perennial relief. The Bel-Air series features a nose platform, providing greater surface area control and power transfer, as well as being designed with a down curved nose for moving forward on the saddle on seated climbs or in an aggressive forward riding position. Available in multiple covering options, these decade proven designs are the ultimate tool for a wide variety of cyclists.Decade proven design for all around comfort and functionality,Slight channel groove for additional comfort enhancements ,Multiple microfibre covers and kevlar sides available,Nose platform allows greater surface area for more control and power transfer,Rear rise rotates pelvis forward for added support,Comfort cleavage,Injection moulded tail and nose bumpers,I-Beam Technology:, Patented SDG Monorail Technology, Honeycomb Structure reduces weight, Micro fine-tuning for precision fit, Ultimate strength to weight ratio,.Weight 325g,Disciplines: Mtn (XC, Trail, Enduro, DH), CX, & Road (Endurance & Racing),Size 270 x 140mm,.
SDG Components Duster Mtn I-Beam SaddleThe Dusters are a Flat-Forward, race ready proven design that allow hours in the saddle. Using a Light-Weight Nylon Glass Fibre base and D2 Edge Flex System, this dual injected base features a soft, rubberized compound along the outer edges of the saddle which allows flex through each pedal stroke, while keeping the centre stiff for ultimate power transfer. Engineered with a snag less rear and nose platform, the Dusters are constructed with a mid-density EVA or Light Weight PU foam and designed for those who desire less pelvis rotation and more mobility. Ergonomically designed with a tip to tail peri-canal for added comfort relief makes the Duster an ultimate tool for numerous riding disciplines.The globally patented I-Beam Technology is the original seat-to-post connection, featuring a monorail design which is proprietary to the SDG brand, allowing the ultimate strength to weight ratio with more fore and aft adjustment capabilities than most traditional rails. All I-Beam Dusters use the Flex-Cavity I-Beam which suspends the monorail for added comfort and shock absorption.Utilizing the "Peri-Canal" which enables fore and aft movement without pressure in the perineum region,Flat and squared off nose to extend ease of movement to the front of the saddle,Super-lightweight EVA foam and nylon fibre composite base with D2 Edge Flex ,Dual injected base,Stiff centre for ultimate power transfer,SDG Flex Cavity I-Beam Technology:, Patented SDG Monorail Technology, Shock absorbing single suspended rail, Honeycomb Structure reduces weight & adds flex, Micro fine-tuning for precision fit, Ultimate strength to weight ratio, .Stylish microfibre top with embossed graphics and kevlar sides ,I-Beam Technology,Size 285 x 137mm,Weight 260g,Optimal Rideable Area (ORA): 105-135mm (medium-large),Disciplines: Mtn (XC, Trail, Enduro), CX and Road (Endurance & Racing),.
SDG Components Duster P I-Beam SaddleThe Dusters are a Flat-Forward, race ready proven design that allow hours in the saddle. Using a Light-Weight Nylon Glass Fibre base and D2 Edge Flex System, this dual injected base features a soft, rubberized compound along the outer edges of the saddle which allows flex through each pedal stroke, while keeping the centre stiff for ultimate power transfer. Engineered with a snag less rear and nose platform, the Dusters are constructed with a mid-density EVA or Light Weight PU foam and designed for those who desire less pelvis rotation and more mobility. Ergonomically designed with a tip to tail peri-canal for added comfort relief makes the Duster an ultimate tool for numerous riding disciplines.The globally patented I-Beam Technology is the original seat-to-post connection, featuring a monorail design which is proprietary to the SDG brand, allowing the ultimate strength to weight ratio with more fore and aft adjustment capabilities than most traditional rails. All I-Beam Dusters use the Flex-Cavity I-Beam which suspends the monorail for added comfort and shock absorption.Utilizing the "Peri-Canal" which enables fore and aft movement without pressure in the perineum region,Flat and squared off nose to extend ease of movement to the front of the saddle ,Super-lightweight EVA foam and nylon fibre composite base with D2 Edge Flex ,Dual injected base,Soft edges allow flex through each pedal stroke,Stiff centre for ultimate power transfer,Stylish microfibre top,SDG Flex Cavity I-Beam Technology:, Patented SDG Monorail Technology, Shock absorbing single suspended rail, Honeycomb Structure reduces weight & adds flex, Micro fine-tuning for precision fit, Ultimate strength to weight ratio, .Size 285 x 137mm,Weight 230g,Optimal Rideable Area (ORA): 105-135mm (medium-large),Disciplines: Mtn (XC, Trail, Enduro), CX and Road (Endurance & Racing),.
Constructed with a D2 Edge-Flex design, this Duster saddle features softened edges which allow for a smooth pelvic rotation when pedalling, maximising your performance with every motion. The stiffer centre section of the seat allows for unrivalled power transfer and support as you soar from trail to trail and beyond. A Peri-Canal runs along the centre of the seat, relieving pressure on your perineal area while the exclusive, Flex Cavity I-Beam monorail provides a firm hold and shock-absorbing performance thanks to its unique honeycomb structure and excellent fine-tuneability. The Duster P is a fantastic seat for the ardent off-roader or rampant road rider.
From Road and Cross-Country disciplines to World Cup DH podiums, the Fly is one of stiffest and most dependable performance tools in the SDG portfolio. The I-Fly uses a nylon glass fibre, solid beam constructed base, with a honeycomb core, creating one of the lightest strength to weight saddle connections in the world. All Fly models incorporate an EVA foam, minimalistically designed with a snag-less, flat-forward, NO BS approach. Ideal for advanced cyclists with limited seated movements and those who prefer narrower, stiffer saddles. The Fly series is for power and performance, catering to a wide spectrum of disciplines and available in multiple designs. Light and strong technologically advanced with minimalistic design., Flat forward platform., Rear buzz-cut., Lightweight EVA foam., Lowered profile nylon glass base., 2 piece cover with kevlar sides., I-Beam Technology:, Patented SDG Monorail Technology., Honeycomb Structure reduces weight., Micro fine-tuning for precision fit., Ultimate strength to weight ratio.. Weight: TBC., Dimensions: 257mm x 128mm., Disciplines: Mtn (XC, Trail, Enduro, DH), CX, & Road (Endurance & Racing)..
The SE Bear Trap Pedals offer that old school BMX style that's got all the grip and stability you need. The extra wide "bear trap" cages keep your feet exactly where they need to be. Anodized aluminum cage with 9/16" boron steel spindle. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Metal BEARINGS: Loose Ball PACK SIZE: 2 (Pair) WEIGHT: 14.6 oz
The SE Bikes Beast Mode Ripper 2020 with a $100 Money Lynch Wrap has been designed in conjunction with Marshawn Lynch from the NFL's Oakland Raiders and features floval 6061 aluminium tubing, mechanical disk brakes, a Beast Mode edition number plate, vinyl Beast Mode x SE Racing padset, a custom Marshawn Lynch Beast Mode sticker sheet, authentic Marshawn Lynch trading card, SE Wheelie Pegs and SE chain tensioners. ###section### Product Specs FRAME MATERIAL: 6061 Aluminium WHEEL SIZE: 29" TOP TUBE LENGTH: 22.9" CHAIN STAY LENGTH: 17.8" HEADTUBE ANGLE: 73° SEAT TUBE ANGLE: 71° FORKS: Landing Gear, full Cr-Mo, 430mm axle to crown, 39mm offset, 110mm spaced dropouts. BARS: Oakland 4pc Cr-Mo cruiser bar, 29" x 6", 10° backsweep, 1° upsweep. STEM: Beastmode edition retro alloy top load with engraved Beastmode logo & lightweight cutouts, 55mm reach. HEADSET: Tange 1-1/8" threadless. BRAKE MOUNTS: Disk BRAKES: Avid BB5, mechanical disc with Tri-Align caliper positioning system, 160mm rotor, front & rear. FRONT HUB: Alloy 36H nutted sealed hubs FRONT RIM: 42mm double wall disc rim REAR HUB: Alloy 36H nutted 16T sealed cassette hub. REAR RIM: 42mm double wall disc rim TYRES: Vee Tire Co x Beast Mode Speedster, 27.5" x 3.0" front & rear. SPROCKET: 33T alloy SE Racing sprocket CRANKS: SE V-Ridge 3-pc Cr-Mo cranks, 175mm BB: External sealed Euro. PEDALS: X-Pedo low profile platform with removable pins. SEAT: Beastmode Edition Diamond Stitch Flyer seat with custom SE bottle opener brace. GEARING: 33/16 WEIGHT: 15.33 kgs ###section### Product Highlights Larger Wheels for that road bike performance with a BMX feel Larger wheels allow for a more comfortable ride without sacrificing too much of that BMX feel Lightweight Aluminium Frame Front & Rear Disk Brakes Packed With Accessories!
A lightweight, three layer waterproof knitted beanie is comfortable and insulated. Ideal for use everyday or adventuring in cold weather conditions.Key Features:Waterproof - three layer construction for warmth, durability and waterproofing,Durable - Acrylic outer fabric for hard wearing stretch,Insulation and Comfort - Micro fleece lining for warmth and moisture control.