The new Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology. Key Features: Fits any 104 BCD crankset,The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.,Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.,Prevents premature ring and chain wear that can come from non-optimized profiles.,. Compatibility: Fits any 104 BCD crankset,Compatible with Shimano 12-speed Hyperglide+ chains,Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colors.,104 x 30t - use 10mm bolts,104 x 32t, 34t, 36t, 38t use 6mm bolts.,If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm),104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).
These Praxis compact 110BCD Road Chainring Sets are engineered for the highest performance shifts in all conditions.LevaTime® performance and our proprietary forging process give the fastest shifts and longest lifetime of any Chainring on the planet.PLEASE NOTE: Chainring bolts are not included. EXCEPT with the 48/32 where custom ring bolts required for installation are included.Image for illustration purposes only
Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminium and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring – going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.PLEASE NOTE: Chainring bolts are NOT included.• Installs on 4-arm 104BCD MTB Crank.• RD- Must use ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2.• In very rough terrain, or just for pure security, we still recommend use of an upper guide.Specification:• 104 BCD | 30t - 36t | 7075-T6• Wave™ Tech tooth profile• 10/11/12sp Shimano/KMC/SRAM• Stamped and machined manufacturing with hard black anodizing for durability• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2• In very rough terrain, or just for pure security, we still recommend use of an upper guide
Only compatible with V-Shape chainrings.Forged AL6061 spider.BCD 104mm.W0134 - Chain Line (CL): 50mm, Offset: 5.2mm.W0138 - Chain Line (CL): 52mm, Offset: 8.2mm.W0140 - Chain Line (CL): 55mm, Offset: 9.9mm.
Our Praxis TT Road Chainrings are the result of relentless testing and tweaking, matched with the best material and manufacturing processes to create some of the smoothest running, most durable and sweetest shifting Chainrings available. These TT Rings are machined from 7075 T6 Aluminium and hard anodized for even more durability. They also feature our famous LevaTime Shifting Technology, which boasts synchronized ramps and strategically placed shift pins for perfectly timed shifts every time.PLEASE NOTE: Chainring Bolts are NOT included.SHIMANO - Our Praxis time trial chainrings work great with the new Shimano 10/11sp chain and drivetrains (Di2 included) when mounted to a traditional 5-arm mount 110 or 130 BCD Shimano crank. They also work great with traditional 5-arm mount aftermarket cranks such as THM, Rotor, Cannondale, Specialized, LOOK and FSA cranks… *Our chainrings do not mount to the new DA9000 crank with its new custom asymmetrical BCD.SRAM - Our chainrings work great with the SRAM 10sp and 11sp drivetrains when mounted to a traditional 5-arm mount 110 or 130 BCD SRAM crank. They also work great with traditional 5-arm mount aftermarket cranks such as THM, Rotor, Cannondale, Specialized, LOOK and FSA cranks.EXOGRAM RED/FORCE/RIVAL CRANKS - Our rings are not made for the brand new SRAM ‘Exogram’ cranks as they are a custom 4-arm mounting. -YAW FRONT DERAILLEUR - Our rings shift great with the new SRAM “Yaw” front derailleur.CAMPY - Our rings work great with Campy 10/11sp chain and drivetrains (EPS included) when mounted on a traditional 5-arm mount 110 or 130 BCD crank such as a THM, Rotor, Cannondale, Specialized, LOOK, FSA crank. Our rings DO NOT mount to Campy cranks.LEVATIME – Our LevaTime shifting is the product of years of relentless testing and tweaking. The final result is a set of some of the finest and fastest-shifting rings available. With a LevaTime ring, several custom shift pins are placed strategically at points on the ring to provide a perfectly timed lift. Synchronized ramps are tuned with a specific inner ring, providing a clean channel for the chain to move upwards. Each individual tooth is sculpted to handle a specific duty. Along with that, the Praixs time trail chainring's precisely located scallops help control chain movement and prevent chain suck.Specification:• LIMITED EDITION MACHINED PRODUCTION• 54/42 130BCD.• Heat Treated and Hard Anodized 7075 T6 Aluminium.• Work with Shimano™ 10/11, Campy 10/11, SRAM 10/11 drivetrains.• Designed for traditional 5-arm 130BCD cranks.• We highly suggest KMC, Shimano™, or Campy chains.• Not compatible with 4-arm Campy or 4-arm SRAM Exogram cranks.• GREAT for use with Di2 or EPS systems.• Power2Max, SRM, and Quarq power meter compatible.
Patented drop-stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at wolf tooth's hq in Minnesota, USA,Beautiful anodised finish,.CompatibilityThese rings fit on the shimano xtr m9000 and m9020 1x or 2x cranksets,Use only the stock shimano xtr chainring bolts (m7),You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including sram eagle),Compatible with all 10-, 11-, and 12-speed chains except shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline - 49 mm for 30-34t and 50 mm for 36t..
The Wolf Tooth 110 BCD 4 Bolt Chainring for Shimano GRX is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Shimano GRX drivetrains, this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go. Key Features: Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish,. Compatibility: Shimano GRX cranksets including RX600 and RX810,Drop-Stop® FT tooth profile is compatible with 9, 10, 11 and 12-speed chains (including SRAM Flattop),Not compatible with Shimano HG+ 12-speed chains.
Patented Drop-stop® Wide-narrow Tooth Profile For Minimised Dropped Chains,Perfect For 1x Setups,Machined In-house At Wolf Tooth's Hq In Minnesota, USA,.CompatibilityThese Rings Fit Any Sram 76 Bcd Spider Or Specialized Stout Crankset.,Threaded For Standard M8 Chainring Bolts. For The Xx1 Spider, We Recommend 6mm Bolts (Or Any Short M8 Chainring Bolt). For The Stout Crankset, We Recommend The 10mm Bolts Or The Bolts That Come With The Crankset.,For 1x9, 1x10, 1x11 And 1x12 Drivetrains (Including Sram Eagle)Compatible With All 10-, 11-, And 12-speed Chains Except Shimano 12-speed Chains.,If Using A 9-speed Drivetrain Use A 10-speed Chain (Shifts And Works Well On A 9-speed Drivetrain And Fits The Ring Tighter For Better Chain Retention).,..
The Wolf Tooth 94 BCD SRAM X1 Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on SRAM X01, X1, GX and NX cranks, the Wolf Tooth 94 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:These rings fit any SRAM crankset with a 94 BCD. ,Note that Wolf Tooth also offers SRAM Direct Mount chainrings for Standard and BB30 Short Spindle cranksets and some stainless steel versions.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline - 49mm.
Key Features: SRAM X-SYNC™ wide-tooth, narrow-tooth chainring technology provides maximum chain control,Laser-etched chainring finish is more durable,X-Range™ gearing technology gives you more range and a smoother gear progression, so you're always in the right gear,Can be installed with a single tool, making gearing changes a breeze,. Specification: Chainring Size: 36, 38, 40, 42, 44, 46,Bolt Circle Diameter (BCD): 107 BCD,Speeds: 12,Compat - Yaw: n/a,Material (Chainring): Aluminum,Color (Chainring): Black, Grey.
Key Features:New tooth profiles for improved wear,More durable finish,X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear,.Specifications:Chainring Size: 30T,Bolt Circle Diameter (BCD): 94 BCD,Speeds: 12,Compat - Yaw: n/a,Material (Chainring): Aluminum,Color (Chainring): Black.